Solid State Drives Hi-Speed 2.5 Flash Disk IDE 44pin ATA6000
The ATA6000 Solid State Disk is the next generation of storage device based on industrial flash memory technology, which emulates an ordinary magnetic hard disk.
Built for speed, these Solid State Storage Devices need no moving or spinning parts, and that makes no mechanical noise, suitable for used in portable or embedded system, which has only limited power consumption. The Flash Disk Drive products are also free from extra and special algorithm or some firmware driver. Just plug the unit into the IDE 44pin slots and operate it as same as a regular Hard Disk Drives.
These high-speed SSD units provide faster and higher performance storage solution for industrial application, embedded computing, high-speed networking, broadband communications, mobile computing, military, medical and aerospace
In Addition of high-performance, the devices are capable of withstanding a higher dree of enivornmental distress, delivering extreme endurance.
Commercial Temperature Operating Range: 0c to +70c
|
|
Product listing
Specifications
Flash in Disk (FiD) 2.5 ATA6000 products provide high capacity 2.5-inch
solid-state flash disk that electrically complies with ATA6 standard. InnoDisk
FiD 2.5 ATA6000 is 2.5-inch solid-state data storage systems under industrial
environment. FiD 2.5 ATA6000 supports PIO (0-4), Multiword DMA(0-2) and Ultra
DMA(0-5) transfer modes. FiD 2.5 ATA6000 supports LBA addressing mode.
 |
Burst Transfer Rate : 100MB/sec (UDMA5)
Sustained Read : 60MB/sec
Sustained Write : 40MB/sec
Average Latency : 0.4 ms
DC Input Voltage: +3.3V/+5V Single power supply
Dimension: 100.1/69.8/9.5 mm (W/T/H)
Compatibility: CE
and FCC standards |
 |
No additional device drivers are required. Flash in Disk (FiD) 2.5 ATA6000 can be
configured as a boot device.
|
 |
Flash memory can be erased a limited number of times. This number is called the
erase cycle limit or write endurance limit and is defined by the flash array
vendor. The erase
cycle limit applies to each individual erase block in the flash device. FiD 2.5
ATA6000 uses a wear-leveling algorithm to ensure that consecutive writes of a
specific sector are not written physically to the same page in the flash. This
averages flash media usage evenly across all pages, thereby flash lifetime
extends. |
 |
Operating Temperature Range
Standard Grade: -10°C ~ +70°C
Industrial Grade: -40°C ~ +85°C
Storage Temperature Range
Standard Grade: -55°C to +95°C
Industrial Grade: -55°C to +95°C
|
 |
Reliability Test Conditions
Vibration: 7 Hz to 700Hz, 2 g, 3 axes
Mechanical Shock Duration:
0.5ms,1 500 g, 3 axes
Product Condition MTBF (Hours): FiD 2.5 ATA6000 Telcordia SR-332 GB, 25
°CC > 3,000,000
|
|
Capacity |
Cylinders |
Heads |
Sectors |
LBA |
|
8GB |
15731 |
16 |
63 |
15856848 |
|
16GB |
16383 |
16 |
63 |
31717632 |
|
32GB |
16383 |
16 |
63 |
63438848 |
|
64GB |
16383 |
16 |
63 |
126877696 |
|
128GB |
16383 |
16 |
63 |
253755392 |
Other models available ( Variation)
 |
Looking for pricing?
You can get sample price by clicking on the "details" button on each capacity.
If you need to get a budgetary price for your project, please contact us
|
|
|
Need technical info or advices?
Our mission is to help you finalizing your project successfully. By giving you some advices, we can help you reducing cost and time to market
Here is where you can reach us
|
|
|
FULL PRODUCT LISTING
REQUEST A QUOTE
TECHNICAL SUPPORT
D2DC-02GD11C
