Disk on Module - DOM EDC4000 IDE 40Pin Horizontal Type B
Extremely light weight, reliable & performant, This new generation IDE Flash Module made of SLC Industrial Nand Flash Memory, is the most flexible solution to provide reliable storage on space limited and hostile environnment.
Decreasing data access time and replacing any moving part from a traditional hard drive, the Flash Disk on Module fit the needs of a wide range of application.
100% Compatible with the Standard IDE ATA interface, this unit works exaclty like a standard hard drive but without any moving part, strongly increasing reliability and improving data access speed performance, without any noise.
Commercial Temperature Operating Range: 0c to +70c
|
|
Product listing
Specifications
Note: The difference between Single Channel and Dual Channel impact on the speed only, where the Dual Channel offer twice the read/write transfer speed performance compared to the single channel, since they are made of 2 chips that can be accessed simultaneously. This does not affect the compatibility and both models will be similarly recognised by the motherboard..
Embedded Disk Card 4000 (EDC4000) products provide high capacity solid-state
flash memory that electrically complies with the Personal Computer Memory Card
International Association ATA standard.
InnoDisk Embedded Disk Card 4000 (EDC4000) is embedded solid-state data storage
systems for industrial work place. Embedded Disk Card 4000 (EDC4000) features an
extremely light weight, reliable, low-profile form factor.
Embedded Disk Card 4000 (EDC4000) supports advanced PIO (0-4), Multi Word DMA
(0-2), Ultra DMA (0-4) transfer modes, multi-sector transfers, and LBA
addressing.
 |
Burst Transfer Rate : 66.6Mbps
Sustained Read :
Dual Channel: 40Mbps
Single Channel: 20Mbps
Sustained Write :
Duel channel: 20Mbps
Single Channel: 10Mbps
Average Latency : 0.4 ms
DC Input Voltage: +3.3V/+5V Single power supply
Dimension: 48.20/32.60/7.3 mm (W/T/H)
Compatibility: CE
and FCC standards |
 |
Flash memory can be erased within a limited number of times. This number is
called the erase cycle limit or write endurance limit and is defined by the flash array
vendor. The erase cycle limit applies to each individual erase block in the flash device.
EDC 4000 uses a wear-leveling algorithm to ensure that
consecutive writes of a specific sector are not written physically to the same
page/block in the flash. This spreads flash media usage evenly across all pages,
thereby extending flash lifetime. |
 |
Operating Temperature Range
Standard Grade: -100C ~ +700C
Storage Temperature Range
Standard Grade: -450C to +950C
|
 |
Reliability Test Conditions
Vibration: 7 Hz to 700Hz, 2 g, 3 axes
Mechanical Shock Duration:
0.5ms, 1500 g, 3 axes
Drop Unit: From a height of 1.5 m
Product Condition MTBF (Hours): Telcordia SR-332 GB, 25
0CC > 3,000,000
|
|
Capacity |
Cylinders |
Heads |
Sectors |
LBA |
|
32MB |
500 |
8 |
16 |
64000 |
|
64MB |
500 |
8 |
32 |
128000 |
|
128MB |
500 |
16 |
32 |
256000 |
|
256MB |
1000 |
16 |
32 |
512000 |
|
512MB |
1015 |
16 |
63 |
1023120 |
|
1GB |
2031 |
16 |
63 |
2047248 |
|
2GB |
4063 |
16 |
63 |
4095504 |
|
4GB |
8146 |
16 |
63 |
8211168 |
|
8GB |
16000 |
16 |
63 |
16128000 |
Other models available ( Variation)
 |
Looking for pricing?
You can get sample price by clicking on the "details" button on each capacity.
If you need to get a budgetary price for your project, please contact us
|
|
|
Need technical info or advices?
Our mission is to help you finalizing your project successfully. By giving you some advices, we can help you reducing cost and time to market
Here is where you can reach us
|
|
|
FULL PRODUCT LISTING
REQUEST A QUOTE
TECHNICAL SUPPORT
DE0PB-128D31CXS
