Industrial Compact Flash Hi-Speed ICF8000 with Write Protection Switch (end of life)
The Industrial CompactFlash card is industry standard ATA compatible 50-pin card can easily be designed in to virtually any application, making it the ideal solution for applications requiring very reliable, high performance, low power storage.
Compared to the traditional Retail CompactFlash, this industrial compact flash can operate under -10c to 70c ( please check wide temp model for extended temperature range) and has a durability of more than 2,000,000 program/erase cycles and 3,000,000 hours ( MTBF)
The CompactFlash and PCMCIA cards support True IDE Mode that is electrically compatible with an IDE disk drive. The original CompactFlash form factor card can be used in any system that has a CompactFlash slot.
Write Protection Switch on this model
Commercial Temperature Operating Range: 0c to +70c
|
|
Product listing
Specifications
The InnoDisk Industrial CompactFlash® 8000 Memory Card (iCF8000) products
provide high capacity solid-state flash memory that electrically complies with
the True IDE Mode that is electrically compatible with an IDE disk drive. The
original CF form factor card can be used in any system that has a CF slot.
Designed to replace traditional rotating disk drives, InnoDisk Industrial
CompactFlash® 8000 Memory Cards are embedded solid-state data storage systems
for mobile computing and the industrial work place. The Industrial CompactFlash®
features an extremely lightweight, reliable, low-profile form factor.
Industrial CompactFlash® 8000 (iCF8000) supports advanced PIO (0-4), Multiword
DMA (0-2), Ultra DMA (0-6) transfer modes, multi-sector transfers, and LBA
addressing.
 |
Interface: 50pin Compact Flash
IDE Transfer Mode:
PIO mode 0-4
MwDMA mode 0-2
UltraDMA mode 0-6
Capacity:
2GB~16GB (SLC)
8GB~ 32GB (MLC)
Data transfer rate: Read- 80MB/sec.,
Write-75MBytes/s (SLC); 40MBytes/s (MLC)
Compact Design: Buil-in Power pin (pin 7) - (optional - please contact us)
Error Correction Function: Built-in ECC corrects up to 8-bit per 512-Byte
Dimension: 42.80±0.1/36.40±0.1/3.30±0.05mm (W/T/H)
Weight: 5g
|
 |
No additional device drivers are required. The iCF8000 can be configured as a boot device.
Any Operating system can be installed.
|
 |
Operating Temperature Range
Standard Grade: 0°C to +70°C
Industrial Grade: -40°C to +85°C
Storage Temperature Range
Standard Grade: -55°C to +95°C
|
 |
| Reliability |
Test Conditions |
Reference Standards |
| Vibration |
7 Hz to 2 KHz, 20G, 3 axes |
IEC 68-2-6 |
| Mechanical Shock |
Duration: 0.5ms, 1500G, 3 axes |
IEC 68-2-27 |
| Product |
Condition |
MTBF (Hours) |
| iCF8000 |
Telcordia SR-332 GB, 25°C |
3,000,000 |
|
 |
iCF8000 supports the following transfer mode:
PIO Mode: 0~4
Multiword DMA: 0~2
Ultra DMA: 0~2
iCF8000 power consumption
Quad:
5V
Read operation: 185mA(max.)
Write operation: 210mA(max.)
Power Down mode: 1.3mA(max.)
3.3V
Read operation: 105mA(Typ.)
Write operation: 115mA(Typ.)
Power Down mode: 0mA(max.)
|
Other models available ( Variation)
 |
Looking for pricing?
You can get sample price by clicking on the "details" button on each capacity.
If you need to get a budgetary price for your project, please contact us
|
|
|
Need technical info or advices?
Our mission is to help you finalizing your project successfully. By giving you some advices, we can help you reducing cost and time to market
Here is where you can reach us
|
|
|
FULL PRODUCT LISTING
REQUEST A QUOTE
TECHNICAL SUPPORT
DC1S-02GD91C1D-A
