InnoLite mSATA D150Q
Budget friendly flash storage for semi-industrial applications, e.g. kiosk
These InnoLite series is absolutely different from those SSDs for consumer market. This product line is Reliable, industrial-thinking, and passed serial comprehensive reliability tests.
InnoLite series stands out from consumer grade SSDs due to our reliability and industrial design. Our InnoLite MLC series passed all comprehensive reliability tests to ensure the highest quality for our customers. Not only are our innoLite Series products customized to fit specific needs, they are backed by our dedicated R&D support team and 2 years warranty as well
InnoLite mSATA D150Q is designed as the standard Mini PCIe form factor with SATA
interface, and supports SATA II standard (3.0Gb/s) with good performance. The
form factor is followed the MO-300 / MO-300B specification, established by JEDEC.
Regarding of mechanical interference, InnoLite mSATA D150Q absolutely replaces
the traditional hard disk and makes personal computer, in any field, smaller and
easier.
InnoLite mSATA D150Q effectively reduces the booting time of operation system
and the power consumption is less than hard disk drive (HDD), and complies with
ATA protocol, no additional drives are required, and can be configured as a boot
device or data storage device.
Commercial Temperature Operating Range: 0c to +70c
|
|
Product listing
Specifications
 |
| Interface |
Support SATA II Interface with Compliant with Serial
ATA Gen 1and Gen 2 Specifications
Performance (quad channel):
Read- 90 MB/sec. (max.)
Write- 30 MB/sec. (max.)
|
| Capacity |
Provide 16GB, 32GB,64 GB within MLCs
Flash ICs.. |
|
 |
Flash memory can be erased a limited number of times. This number is called the
erase cycle limit or write endurance limit and is defined by the flash array
vendor. The erase cycle limit applies to each individual erase block in the
flash device. InnoLite mSATA uses a wear-leveling algorithm to ensure that consecutive
writes of a specific sector are not written physically to the same page in the
flash. This spreads flash media usage evenly across all pages, thereby
maximizing flash lifetime. |
 |
| Operating Temperature |
Standard Grade:
0°C to +70°C |
| Storage Temperature |
-55°C to +95°C |
| Shock(Operating) |
1500G |
| Vibration(Operarting) |
20G |
| Humidity |
10-95%,non-condensing |
|
 |
|
Reliability |
Test Conditions |
Reference
Standards |
| Vibration |
7 Hz to 2KHz,
20G |
IEC 68-2-6 |
| Mechanical Shock |
Duration: 0.5ms, 1500G, 3 Axes |
IEC 68-2-27 |
| Product |
Condition |
MTBF(Hours) |
| InnoLite mSATA |
TELECORDIA SR-332 GB, 250C |
>3,000,000 |
|
 |
InnoLite mSATA uses a standard SATA pin-out.
PIO Mode: 0~4
Ultra DMA: 0~6Serial ATA I 1.5GbpsSerial ATA II 3.0Gbps
| Power Consumption |
Mode |
Power Consumption(mA) |
| Read |
190 |
| Write |
230 |
| Idle |
140 |
|
 |
| Power Requirement |
Item |
Symbol |
Rating |
Unit |
| Input voltage |
VIN |
+5DC +-5% 500mA(max.) |
V |
|
Other models available ( Variation)
 |
Looking for pricing?
You can get sample price by clicking on the "details" button on each capacity.
If you need to get a budgetary price for your project, please contact us
|
|
|
Need technical info or advices?
Our mission is to help you finalizing your project successfully. By giving you some advices, we can help you reducing cost and time to market
Here is where you can reach us
|
|
|
FULL PRODUCT LISTING
REQUEST A QUOTE
TECHNICAL SUPPORT
DRPS-04GJ30AC1SN
