Solid State Drives Hi-Speed 2.5 Flash Disk IDE 44pin INNOROBUST Wide Temp
Compliant with MIL-STD-810-F/G
Data security
iCell technology for data protection
Excellent data transfer speed
TRIM command set supported
Thermal sensor supported
Conformal coating (optional)
InnoRobust SSD provide high capacity 2.5-inch solid-state flash disk that
electrically complies withATA 7 standard, and supports Ultra DMA (0-5) and PIO
(0-4) transfer modes. Particularly InnoDisk hasdedicated to develop own firmware
which enhances small file transfer rate. Regarding performance of InnoRobust SSD,
sustained read is 75 MB per second (max.), and sustained write is 50 MB per
second (max), in terms of 4 KB IOPS, random read is up to 2250, random write is
up to 85.
InnoRobust SSD is designed for industrial field. The SSD have good performance,
no latency time and small seek time. It effectively reduces the booting time of
operation system and the power consumption is less than hard disk drive (HDD).
InnoRobust SSD can work in harsh environment. It is vibration resistance, and
can work in lower or higher temperature than HDD. InnoRobust SSD complies with
ATA protocol, no additional drives are required, and the SSD can be configured
as a boot device or data storage device.
Wide Temperature Operating Range -40c to +85c
|
|
Product listing
Specifications
 |
| Dimension(WxLxH) |
20.8mm x 32.8mm x 8.0mm |
|
 |
Flash memory can be erased a limited number of times. This number is called the
erase cycle limit or write endurance limit and is defined by the flash array
vendor. The erase cycle limit applies to each individual erase block in the
flash device. InnoRobust SATA SSD uses a wear-leveling algorithm to ensure that consecutive
writes of a specific sector are not written physically to the same page in the
flash. This spreads flash media usage evenly across all pages, thereby
maximizing flash lifetime. |
 |
| Attitude |
80,000ft |
| Operating Temperature |
Standard Grade:
00C to +700C |
| Industrial Grade:
-400C to +850C |
| Storage Temperature |
-550C to +950C |
| Shock(Operating) |
1500G |
| Vibration(Operarting) |
20G |
| Humidity |
5-95%,non-condensing |
| Conformal Coating |
Optional |
| Write Protect |
Support |
| DATA Retention |
10 Years |
|
 |
|
Reliability |
Test Conditions |
| Vibration |
7 Hz to 2KHz, 5G, 3 axes,
20G |
| Mechanical Shock |
Duration: 0.05ms, 1500G, 3 Axes |
| Product |
Condition |
MTBF(Hours) |
| InnoRobust SATA SSD |
TELECORDIA SR-332 GB, 250C |
>4,000,000 |
|
 |
| Power Consumption |
Mode |
Power Consumption(mA) |
| Read |
190 |
| Write |
230 |
| Idle |
140 |
|
 |
| Power Requirement |
Item |
Symbol |
Rating |
Unit |
| Input voltage |
VIN |
+5DC +-5% 500mA(max.) |
V |
|
Other models available ( Variation)
 |
Looking for pricing?
You can get sample price by clicking on the "details" button on each capacity.
If you need to get a budgetary price for your project, please contact us
|
|
|
Need technical info or advices?
Our mission is to help you finalizing your project successfully. By giving you some advices, we can help you reducing cost and time to market
Here is where you can reach us
|
|
|
FULL PRODUCT LISTING
REQUEST A QUOTE
TECHNICAL SUPPORT
D2D9-08GJ21AWBQS
