Solid State Drives Hi-Speed 1.8 Flash Disk SATA D150
InnoDisk FiD 1.8 SATA D150 SSD is standard 7+15 pin SATA interface could
support most of the platform with standard SATA port. InnoDisk SATA D150 SSD
operates under SATA II (3.0Gb/s) protocol with good performance, the sustain
read/write can reach up to 120/100MB per second (max).
InnoDisk SATA D150 SSD is also suitable in industrial field. It effectively
reduces the booting time of operation system and the power consumption is less
than hard disk drive (HDD). InnoDisk SATA D150 SSD complies with ATA protocol,
no additional drivers are required, and the SATA D150 SSD can be configured as a
boot device or data storage device.
Commercial Temperature Operating Range: 0c to +70c
|
|
Product listing
Specifications
 |
Interface: Support SATA II Interface (3.0Gbps)
Capacity:
Provide 2GB, 4GB,8GB, 16GB, 32GB |
 |
Flash memory can be erased a limited number of times. This number is called the
erase cycle limit or write endurance limit and is defined by the flash array
vendor. The erase cycle limit applies to each individual erase block in the
flash device. InnoDisk SATADOM D150 SSD uses a wear-leveling algorithm to ensure that consecutive
writes of a specific sector are not written physically to the same page in the
flash. This spreads flash media usage evenly across all pages, thereby
maximizing flash lifetime. |
 |
Operating Temperature RangeStandard Grade: 00C to +700C
Industrial Grade: -400C to +850C
Storage Temperature Range: -550C to +950C
Relative Humidity: 10-95% , Non-Condensing
|
 |
|
Reliability |
Test Conditions |
| Vibration |
7 Hz to 2KHz,3 axes,
20G |
| Mechanical Shock |
Duration: 105ms, 1500G, 3 Axes |
| Product |
Condition |
MTBF(Hours) |
| InnoDisk SATA D150 SSD |
TELECORDIA SR-332 GB, 250C |
>3,000,000 |
|
 |
InnoDisk SATA D150 SSD uses a standard SATA pin-out.
PIO Mode: 0~4
Ultra DMA: 0~6Serial ATA I 1.5GbpsSerial ATA II 3.0Gbps
| Power Consumption |
Mode |
Power Consumption(mA) |
| Read |
180 |
| Write |
200 |
| Idle |
110 |
|
 |
| Power Requirement |
Item |
Symbol |
Rating |
Unit |
| Input voltage |
VIN |
+5DC +-5% 500mA(max.) |
V |
|
Other models available ( Variation)
 |
Looking for pricing?
You can get sample price by clicking on the "details" button on each capacity.
If you need to get a budgetary price for your project, please contact us
|
|
|
Need technical info or advices?
Our mission is to help you finalizing your project successfully. By giving you some advices, we can help you reducing cost and time to market
Here is where you can reach us
|
|
|
FULL PRODUCT LISTING
REQUEST A QUOTE
TECHNICAL SUPPORT
D1ST2-02GJ30AC1DS
