InnoDisk FiD 2.5 SATA4000 products provide high capacity flash memory Solid State Drive (SSD) that electrically complies with Serial ATA (SATA) standard. InnoDisk FiD 2.5 SATA4000 support SATA I standard (1.5Hz) with high performance. Sustain read is 37MB(Max) per second, and sustain write is 34MB(Max) per second. InnoDisk FiD 2.5 SATA4000 uses standard 2.5-inch form factor, which can be used in laptop. InnoDisk FiD 2.5 SATA4000 is also designed for industrial field.

The SSD have good performance, and have small latency time. It effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD). InnoDisk FiD 2.5 SATA4000 can work in harsh environment. The SSD is vibration resistance, and can work in lower or higher temperature than HDD. InnoDisk FiD 2.5 SATA4000 complies with ATA protocol, no additional drives are required, and the SSD can be configured as a boot device or data storage device.

	Burst Transfer Rate : 1.5GB/sec Sustained Read : Duel Channel: 37MB/sec Single Channel: 20MB/sec Sustained Write : Duel Channel:34MB/sec Single Channel: 20MB/sec Average Latency : 0.4 ms DC Input Voltage: +3.3V/+5V Single power supply Dimension: 99.88/69.63/9.3 mm (W/T/H) Compatibility: CE  and FCC standards

No additional device drivers are required. Flash in Disk (FiD) 2.5 SATA4000 can be configured as a boot device.

Flash memory can be erased within a limited number of times. This number is called the erase cycle limit or write endurance limit and is defined by the flash array vendor. The erase cycle limit applies to each individual erase block in the flash device. InnoDisk FiD 2.5 SATA4000 uses a wear-leveling algorithm to ensure that consecutive writes of a specific sector are not written physically to the same page/block in the flash. This spreads flash media usage evenly across all pages, thereby extending flash lifetime.

Operating Temperature Range Standard Grade: -10°C ~ +70°C Industrial Grade: -40°C ~ +85°C Storage Temperature Range Standard Grade: -55°C to +95°C Industrial Grade: -55°C to +95°C

Reliability Test Conditions Vibration: 7 Hz to 700Hz, 2 g, 3 axes Mechanical Shock Duration: 0.5ms, 1500 g, 3 axes Drop Unit: From a height of 1.5 m Product Condition MTBF (Hours): FiD 2.5 ATA6000 Telcordia SR-332 GB, 25 °CC > 3,000,000

2.5 SATA 10000 plus Hi-Speed Solid State Flash Disk  2.5 SATA 10000 plus Hi-Speed Solid State Flash Disk Wide Temp  iSLC Solid State Drives 2.5 Flash Disk SATA 2IE  Solid State Drives Hi-Speed 2.5 Flash Disk SATA 4000  Solid State Drives Hi-Speed 1.8 Flash Disk SATA D150  Solid State Drives Hi-Speed 1.8 Flash Disk SATA D150 Wide temp  Solid State Drives Hi-Speed 2.5 Flash Disk SATA 25000 Industrial  Solid State Drives Hi-Speed 2.5 Flash Disk SATA 25000 Wide Temp  Solid State Drives Hi-Speed 2.5 Flash Disk SATA 4000 Wide Temp  Solid State Drives Hi-Speed 2.5 Flash Disk SATA 6000  Solid State Drives Hi-Speed 2.5 Flash Disk SATA 6000 Wide Temp  Solid State Drives Hi-Speed 2.5 Flash Disk SATA INNOROBUST II  Solid State Drives Hi-Speed 2.5 Flash Disk SATA INNOROBUST II Wide Temp

Looking for pricing? You can get sample price by clicking on the "details" button on each capacity. If you need to get a budgetary price for your project, please contact us

Need technical info or advices? Our mission is to help you finalizing your project successfully. By giving you some advices, we can help you reducing cost and time to market Here is where you can reach us

Need more info ? Ask us! Name:     Email:       Phone:   Question/Inquiry:   Do you want to be contacted by: Phone     e-mail                                       Enter the verification code above into this field: