Solid State Drives Hi-Speed 2.5 Flash Disk SATA 6000 Wide Temp
The SATA Solid State Disk Wide Temp is the next generation of storage device based on industrial flash memory technology, which emulates an ordinary magnetic hard disk.
Built for speed, these Solid State Storage Devices need no moving or spinning parts, and that makes no mechanical noise, suitable for used in portable or embedded system, which has only limited power consumption. The Flash Disk Drive products are also free from extra and special algorithm or some firmware driver. Just plug the unit into the SATA slots and operate it as same as a regular Hard Disk Drives.
These high-speed SSD units provide faster and higher performance storage solution for industrial application, embedded computing, high-speed networking, broadband communications, mobile computing, military, medical and aerospace
In Addition of high-performance, the devices are capable of withstanding a higher dree of enivornmental distress, delivering extreme endurance.
Wide Temperature Operating Range -40c to +85c
InnoDisk FiD 2.5 SATA 6000 products provide high capacity flash memory Solid State Drive (SSD) that electrically complies with Serial ATA (SATA) standard. InnoDisk FiD 2.5 SATA 6000 support SATA II standard (3.0GHz) with high performance. Sustain read is 60 MB per second, and sustain write is 40 MB per second. InnoDisk FiD 2.5 SATA 6000 uses standard 2.5-inch form factor, which can be used in laptop. InnoDisk FiD 2.5 SATA 6000 is also designed for industrial field.
The SSD have good performance, and have small latency time. It effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD). InnoDisk FiD 2.5 SATA 6000 can work in harsh environment. The SSD is vibration resistance, and can work in lower or higher temperature than HDD. InnoDisk FiD 2.5 SATA 6000 complies with ATA protocol, no additional drives are required, and the SSD can be configured as a boot device or data storage device.
interface Serial ATA II
SATA Transfer Mode PIO mode 0-4/ MwDMA mode 0-2/UDMA mode 0-6
Burst Speed Rate 300MB/sec.
Operation Temp -400C~+850C(Standard)
Storage Temp -550C~+950C
ECC Technology High reliability base on the internal ECC function
MTBF >3,000,000 hours
R/W Endurance 2,000,000 times
DC Input Voltage +5V single power supply operation
Power Mode Auto stand-by mode
Burst Transfer Rate : 3Gbps
Sustained Read : 60MB/sec
Sustained Write : 40MB/sec
Average Latency : 0.4 ms
InnoDisk FiD 2.5 SATA 6000 support following transfer mode:
PIO Mode: 0~4.
Multiword DMA: 0~2.
Ultra DMA: 0~5.
Serial ATA I: 1.5Gbps
Serial ATA II: 3.0Gbps
||7 Hz to 700 Hz, 2 g, 3 axes
||Duration: 0.5ms, 1500 g, 3 axes
||From a height of 1.5 m
Telcordia SR-332 GB, 250C,
> 3,000,000 Hours
Read Cycles: Unlimited Read Cycles.
Write /Erase Cycles: 2,000,000 Erase Cycles.
>150 years - 50GB write-erase /day
Data Retention: 10 years.
Wear-Leveling Algorithm: support.
Bad Blocks Management: Support
Error Correct Code: Support
Operating Temperature Range:
- Standard Grade: -100C to +700C
Storage Temperature Range:
- Standard Grade: -450C to +950C
This drive is also available in 3.5 inch form factor with Expansion Kit
Please contact us for more information
Other models available ( Variation)
Looking for pricing?
You can get sample price by clicking on the "details" button on each capacity.
If you need to get a budgetary price for your project, please contact us
Need technical info or advices?
Our mission is to help you finalizing your project successfully. By giving you some advices, we can help you reducing cost and time to market
Here is where you can reach us