Disk on Module DOM SATA D150 Vertical Low Profile Wide Temp
Product listing
Specifications
 |
Interface: Support SATA II Interface with Compliant with Serial ATA Gen 1 Capacity:
Provide 128MB, 256MB, 512MB, 1GB, 2GB, 4GB, 8GB within SLCs |
 |
Flash memory can be erased a limited number of times. This number is called the
erase cycle limit or write endurance limit and is defined by the flash array
vendor. The erase cycle limit applies to each individual erase block in the
flash device. InnoDisk SATADOM D150SV-LW wide temp uses a wear-leveling algorithm to ensure that consecutive
writes of a specific sector are not written physically to the same page in the
flash. This spreads flash media usage evenly across all pages, thereby
maximizing flash lifetime. |
 |
Operating Temperature RangeStandard Grade: 00C to +700C
Industrial Grade: -400C to +850C
Storage Temperature Range: -550C to +950C
Relative Humidity: 10-95% , Non-Condensing
|
 |
|
Reliability |
Test Conditions |
| Vibration |
7 Hz to 2KHz, 5G, 3 axes |
| Mechanical Shock |
Duration: 10ms, 50G, 3 Axes |
| Product |
Condition |
MTBF(Hours) |
| InnoDisk SATADOM D150SV-LW |
TELECORDIA SR-332 GB, 250C |
>4,000,000 |
|
 |
InnoDisk SATADOM D150SV-LW uses a standard SATA pin-out. See List for InnoDisk SATADOM
D150SV-LW pin assignments.
PIO Mode: 0~4 Ultra DMA: 0~6Serial ATA I 1.5GbpsSerial ATA II 3.0Gbps
| Power Consumption |
Mode |
Power Consumption(mA) |
| Read |
165 |
| Write |
165 |
| Idle |
70 |
|
 |
| Power Requirement |
Item |
Symbol |
Rating |
Unit |
| Input voltage |
VIN |
+5DC +-5% 500mA(max.) |
V |
|
Other models available ( Variation)
 |
Looking for pricing?
You can get sample price by clicking on the "details" button on each capacity.
If you need to get a budgetary price for your project, please contact us
|
|
|
Need technical info or advices?
Our mission is to help you finalizing your project successfully. By giving you some advices, we can help you reducing cost and time to market
Here is where you can reach us
|
|
|