Solid State Disk SATA Slim D150Q
The SATA Slim is designed to comply with JEDEC SFF-8156 standard form factor, which is extremely suitable for portable / hand-held devices or thin clients. Moreover, its standard 7+15 pin SATA interface could support most of the platform with standard SATA port. InnoDisk SATA Slim operates under SATA II (3.0Gb/s) protocol with good performance, the sustain read/write can reach up to 125/120MB per second (max).
The SATA Slim is also suitable in industrial field. It effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD). InnoDisk SATA Slim complies with ATA protocol, no additional drivers are required, and the SATA Slim can be configured as a boot device or data storage device.InnoDisk SATA Slim D150Q is designed with standard SATA interface (7+15 SATA connector), which could support most platforms with standard SATA port. Besides, with its smaller dimension, SATA Slim D150Q is an alternative solution of 2.5”
SSD for those embedded system that may have mechanical and space concerns.
InnoDisk SATA Slim D150Q operates under SATA II (3.0Gb/s) protocol with good performance, the sustain read/write can reach up to 130/125MB per second (max).
InnoDisk SATA Slim D150Q is also suitable in industrial field. It effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD). InnoDisk SATA Slim D150Q complies with ATA protocol, no additional drivers are required, and the SATA Slim can be configured as a boot device or data storage device.
Commercial Temperature Operating Range: 0c to +70c
|
|
Product listing
Specifications
 |
| Connector Type |
SATA connector uses a 7-pin signal and AA 15-pin
power segment |
| Flash Type |
SLC(Single Level Cell) |
| Density |
2GB,4GB,8GB,16GB,32GB |
| Transfer Mode |
SATA II, SATA I, PIO 0-4,
MDMA 0-2, UDMA 0-6 |
| Sustained R/W Performance |
Read: 135 MB/sec(max.) |
| Write: 130 MB/sec(max.) |
|
 |
| DC Input |
+3.3V DC 5% |
| Power Consumption(Max.) |
Read: 180 mA |
| Write: 200 mA |
| Idle: 110mA |
| Operating Temp. |
00C-+700C(Standard Grade) |
| -400C-+850C(Industrial Grade) |
| Storage Temp. |
-550C-+950C |
| Humidity |
Relative Humidity: 10-95%,non-condesing |
| Flash Endurance |
100,000 program/erase cycles |
| MTBF |
>3,000,000 hours |
| Certification |
CE,FCC,RoHS |
| Warranty |
5 years |
|
 |
| Dimension(WxLxH) |
39mm x 54mm x 3.4mm |
| Weight |
9g 2g |
| Vibration |
7 Hz to 2K Hz, , 3 axes |
| Shock |
0.5ms, 1500G, 3 axes |
|
Other models available ( Variation)
 |
Looking for pricing?
You can get sample price by clicking on the "details" button on each capacity.
If you need to get a budgetary price for your project, please contact us
|
|
|
Need technical info or advices?
Our mission is to help you finalizing your project successfully. By giving you some advices, we can help you reducing cost and time to market
Here is where you can reach us
|
|
|
FULL PRODUCT LISTING
REQUEST A QUOTE
TECHNICAL SUPPORT
D1SS-02GJ30AC1DB
