iCF4000 Plus Industrial CF Card(Industrial, Standard Grade, 0? ~ +70?)

The InnoDisk Industrial CompactFlash 4000 Memory Card (iCF4000) products provide high capacity solid-state flash memory that electrically complies with the Personal Computer Memory Card International Association (PCMCIA) ATA (PC Card ATA) standard. (In Japan, the applicable standards group is JEIDA.) The CompactFlash and PCMCIA cards support True IDE Mode that is electrically compatible with an IDE disk drive. The original CF form factor card can be used in any system that has a CF slot. Designed to replace traditional rotating disk drives, InnoDisk Industrial CompactFlash 4000 Memory Cards are embedded solid-state data storage systems for mobile computing and the industrial work place. The Industrial CompactFlash features an extremely lightweight, reliable, low-profile form factor.

Industrial CompactFlash 4000 (iCF4000) supports advanced PIO (0-6), Multiword DMA (0-4), Ultra DMA (0-4) transfer modes, multi-sector transfers, and LBA addressing.

Interface: 50pin CompactFlash Capacity: 128MB~16GB Data transfer rate: Single: Read- 20MB/sec., Write- 10MB/sec. Dual: Read- 40MB/sec., Write- 20MB/sec. Data retention: 10 years Power Requirement: +3.3V/+5V DC single power supply Three access modes: PC Card Memory Mode PC Card I/O Mode True IDE Mode Error Correction Function: 4 bits/ per 512 byte Dimension: 42.8 x 36.4 x 3.3 mm (WxLxH)

No additional device drivers are required. The InnoDisk Industrial CompactFlash 4000 Memory Card (iCF4000) can be configured as a boot device.

Flash memory can be erased a limited number of times. This number is called the erase cycle limit or write endurance limit and is defined by the flash array vendor. The erase cycle limit applies to each individual erase block in the flash device. iCF4000 uses a wear-leveling algorithm to ensure that consecutive writes of a specific sector are not written physically to the same page in the flash. This spreads flash media usage evenly across all pages, thereby maximizing flash lifetime.

Operating Temperature Range Standard Grade: 00C to +700C Industrial Grade: -400C to +850C Storage Temperature Range Standard Grade: -550C to +950C

Reliability Test Conditions Vibration: 7 Hz to 2 KHz, 20 g, 3 axes Mechanical Shock Duration: 0.5ms, 1500 g, 3 axes Product Condition MTBF (Hours): iCF4000 Telcordia SR-332 GB, 250C > 3,000,000

iCF4000Transfer modes: PIO(0-6) Multiword DMA (0-4) Ultra DMA(0-4) Power Consumption Mode Volt Read Write Single 5 69mA 59mA Single 3.3 67mA 52mA Dual 5 125mA 120mA Dual 3.3 121mA 115mA

Industrial Compact Flash Hi-Speed ICF4000 ismart  Industrial Compact Flash Hi-Speed ICF4000 ismart wide temp  Industrial Compact Flash Hi-Speed ICF4000 with Write Protection Switch  iCF4000 Plus Industrial CF Card(W/T Grade, -40? ~ +85?)  Industrial Compact Flash Hi-Speed ICF4000 Wide Temp with Write Protection Switch

iCF 1ME w/ Toshiba 15nm (Standard Grade, 0? ~ +70?)  iCF 1ME w/ Toshiba 15nm(Industrial,W/T Grade, -40? ~ +85?)  iCF 1SE Industrial CF Card(Industrial, Standard Grade, 0? ~ +70?)  iCF 1SE Industrial CF Card(Industrial, W/T Grade, -40 ~ 85?)  iCF4000 Plus Industrial CF Card(Industrial, Standard Grade, 0? ~ +70?)  iCF4000 Plus Industrial CF Card(W/T Grade, -40? ~ +85?)  iCF9000 Industrial CF Card with Toshiba(Industrial, W/T Grade, -40 ~ 85?)  iCF9000 Industrial CF Card(Industrial, Standard Grade, 0? ~ +70?)  Industrial CompactFlash iCF 1SE SLC  Industrial CompactFlash iCF 1SE SLC Wide Temp  Industrial CompactFlash iCF9000 MLC  Industrial CompactFlash iCF9000 MLC Wide Temp  Industrial Compact Flash Hi-Speed ICF4000 ismart  Industrial Compact Flash Hi-Speed ICF4000 ismart wide temp  Industrial Compact Flash Hi-Speed ICF4000 Wide Temp with Write Protection Switch  Industrial Compact Flash Hi-Speed ICF4000 with Write Protection Switch  Industrial Compact Flash Hi-Speed ICF9000 Wide Temp with Write Protect Switch  Industrial Compact Flash Hi-Speed ICF9000 with Write Protect Switch  iSLC Industrial Compact Flash 1IE series

Looking for pricing? You can get sample price by clicking on the "details" button on each capacity. If you need to get a budgetary price for your project, please contact us

Need technical info or advices? Our mission is to help you finalizing your project successfully. By giving you some advices, we can help you reducing cost and time to market Here is where you can reach us

Need more info ? Ask us! Name:     Email:       Phone:   Question/Inquiry:   Do you want to be contacted by: Phone     e-mail                                       Enter the verification code above into this field: