Industrial Storage // memorydepot.com

64GB InnoRobust II 2.5" SATA SSD Solid State Disk Wide Temp D2SN-64GJ21AW1ET

Industrial SATA Solid State Flash Disk
64GB

Industrial SLC SATA Solid State Flash Disk
Wide Temp

nnoDisk Corporation, a technology leader in flash and DRAM storage products, today announces a new generation of military class rugged SSDs, InnoRobust II SATA SSD, targeting on military/aerospace applications. InnoRobust II SATA SSD is compliant with MIL-STD-810-F/G standards (a United States Military Standard), which assures rugged DSEign for all environments. It also delivers high data security functions for mission critical, military and defense applications or systems. Besides, InnoRobust II SATA SSD can provide option of conformal coating, which is especially suitable for those who concern with the reliability of SSDĀ“s humidity, insulating compound, and also moisture resistance, for example.

  • Compliant with MIL-STD-810-F/G
  • Data Security
  • (QEraser/SEraser/Write Protect)
  • iCell technology for data protection
  • Excellent data transfer rate
  • Conformal coating (Optional)
  • Regular temp ( -0c to 70c )

    InnoRobust series products provide high capacity flash memory Solid State Drive (SSD) that electrically complies with Serial ATA (SATA) standard. InnoRobust SATA SSD supports SATA II standard (3.0GHz) with high performance. Particularly InnoDisk has dedicated to develop own firmware which enhances small file transfer rate. InnoRobust SATA SSD is designed for industrial field. The SSD have good performance, no latency time and small seek time. It effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD). InnoRobust SATA SSD can work in harsh environment. The SSD is vibration resistance, and can work in lower or higher temperature than HDD. InnoRobust SATA SSD complies with ATA protocol, no additional drives are required, and the SSD can be configured as a boot device or data storage device.



    What is the difference between "regular" version and [Version2]?
    The [Version2] with part# ending with a "B" is simply a new revision of the model with an updated memory chip and firmware update, they have the exact same functionality and specifications. The [version 2] will be available in a longer time range and the "regular" version will phase out sooner. For a new project, we suggest to go with [Version2]


  • Mechanical Specification

    Interface SATA

    Wear Leveling
    Flash memory can be erased a limited number of times. This number is called the erase cycle limit or write endurance limit and is defined by the flash array vendor. The erase cycle limit applies to each individual erase block in the flash device.InnoRobust II SATA SSD uses a wear-leveling algorithm to ensure that consecutive writes of a specific sector are not written physically to the same page in the flash. This spreads flash media usage evenly across all pages, thereby maximizing flash lifetime.

    Environmental Specifications
    Operating Temperature Standard Grade: 00C to +700C
    Industrial Grade: -400C to +850C
    Storage Temperature -550C to +950C
    Shock(Operating) 1500G
    Vibration(Operarting) 20G
    Humidity 5-95%,non-condensing
    Conformal Coating Optional
    Write Protect Support
    DATA Retention 10 Years

    Reliabily and Durability

     Reliability

     Test Conditions

    Vibration 7 Hz to 2KHz,  20G
    Mechanical Shock Duration: 0.5ms, 1500G, 3 Axes
     
    Product Condition MTBF(Hours)
    InnoRobust II SATA SSD TELECORDIA SR-332 GB, 250C >4,000,000

    Transfer mode and Power consumption
    Power Consumption Mode Power Consumption(mA)
    Read 190
    Write 230
    Idle 150

    Mechanical Specification

    Power Requirement Item Symbol Rating Unit
    Input voltage VIN +5DC +-5% 500mA(max.) V