Industrial Storage // memorydepot.com

128GB SATA III mSATA Industrial 460MB/S DEMSR-A28D67SC1QY

mSATA module
128GB


Commercial Temp

Innodisk mSATA 3MG-P is designed as the standard Mini PCIe form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers to the MO-300 specification which established by JEDEC. Regarding of mechanical interference, InnoDisk mSATA 3MG-P absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.

Innodisk mSATA 3MG-P effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

  • SATA 6Gb/s interface
  • iSMART disk health monitoring
  • Intelligent error recovery system
  • Excellent data transfer speed
  • Great I.O.P.S for best system reaction
  • Build-in Dram buffer
  • Zero mechanical interference
  • Anti-vibration mechanical design
  • JEDEC standard MO-300 dimension

  • Product Informations

    Model Name: mSATA 3MG-P
    Interface: SATA III 6.0 Gb/s
    Type: Standard
    Flash Type: MLC
    Pin Definition: mSATA
    Capacity: 8GB~128GB
    Max. Channels: 4
    Sequential R/W (MB/sec, max.): 460/160
    Max. Power consumption: 1.28 W (3.3V x 390 mA )
    Thermal Sensor: Wide Temp. only
    External DRAM Buffer: Yes
    H/W Write Protect: No
    ATA Security: Yes
    S.M.A.R.T.: Yes
    Conformal Coating: Optional

    Reliabily and Durability

    Vibration: 20G@7~2000Hz
    Shock: 1500G@0.5ms
    MTBF: 3 million hours

    Environmental Specifications

    Storage Temperature: -550C ~ +950C
    Operation Temperature: Standard Grade: 00C ~ +700C
    Industrial Grade. OP: -400C ~ +850C

    Physical Characteristics

    Dimension (WxLxH/mm): 29.8 x 50.8 x 4.4
    Type: 2.5 inch


    Mechanical Specs.