Industrial Storage // memorydepot.com

4GB InnoLite SATADOM D150QV DESIH-04GJ30AC1SN

SATA Disk on Module
4GB

Cost Effective Innolite solution - Reliable MLC Flash Storage with Wear Leveling algorithm
Commercial Temp

InnoLite series stands out from consumer grade SSDs due to our reliability and industrial design. Our InnoLite MLC series passed all comprehensive reliability tests to ensure the highest quality for our customers. Not only are our innoLite Series products customized to fit specific needs, they are backed by our dedicated R&D support team and 2 years warranty as well

Available in 8GB to 64GB

InnoLite series stands out from consumer grade SSDs due to our reliability and industrial design. Our InnoLite MLC series passed all comprehensive reliability tests to ensure the highest quality for our customers. Not only are our innoLite Series products customized to fit specific needs, they are backed by our dedicated R&D support team and 2 years warranty as well



PRICING AND PRODUCT DETAILS
Mechanical Specification

Interface: Support SATA II Interface with Compliant with Serial ATA Gen 1
Capacity: Provide 8GB, 16GB, 32GB, 64GB within MLCs Flash ICs.

Wear Leveling
Flash memory can be erased a limited number of times. This number is called the erase cycle limit or write endurance limit and is defined by the flash array vendor. The erase cycle limit applies to each individual erase block in the flash device. InnoLite SATADOM D150QV uses a wear-leveling algorithm to ensure that consecutive writes of a specific sector are not written physically to the same page in the flash. This spreads flash media usage evenly across all pages, thereby maximizing flash lifetime.

Environmental Specifications
Operating Temperature Range
  • Standard Grade: 00C to +700C
    Storage Temperature Range: -550C to +950C
    Relative Humidity: 10-95% , Non-Condensing

  • Reliabily and Durability

     Reliability

     Test Conditions

    Vibration 7 Hz to 2KHz,  3 axes, 20G
    Mechanical Shock Duration: 0.05ms, 1500G, 3 Axes
     
    Product Condition MTBF(Hours)
    InnoLite SATADOM D150QV TELECORDIA SR-332 GB, 250C >3,000,000

    Transfer mode and Power consumption
    InnoLite SATADOM D150QV uses a standard SATA pin-out.
  • PIO Mode: 0~4
  • Ultra DMA: 0~6
  • Serial ATA I 1.5Gbps
  • Serial ATA II 3.0Gbps

    Power Consumption Mode Power Consumption(mA)
    Read 190
    Write 230
    Idle 140


  • Electrical Specification
    Power Requirement Item Symbol Rating Unit
    Input voltage VIN +5DC +-5% 500mA(max.) V