Industrial Storage // memorydepot.com

4GB SATADOM D150QV-L DESIL-04GJ30ACADS

SATA Disk on Module
4GB

Quad Channel SATA DOM - up to 4 times faster as regular D150 - Also come with Write Protection switch
Commercial Temp Low Profile

The SATA DOM D150Q product line is the latest generation of SLC SATA Disk on Module. Connected directly to the motherboard.SATADOM D150Q series delivers marvelous small-sized dimision mechanicla design but within superizing high capacity, and also remarkable data transfer rate 125MB/s read - 120MB/s write. As a leading position, InnoDisk developed advanced and especially innovative mechanical design for SATADOM D150Q to improve SSDs reliability to anti-shock and anti-vibration as well.

Features:
  • Amazing smallest SATA disk module
  • Ultra high density up to 32GB
  • Simple and easy installation
  • Advanced and innovative mechanical design for anti-vibration (patented)
  • Built-in VCC at pin 7 (patented, optional)
  • Data encryption AES-128 support

    Please check all the various models on the page below.

    What is the difference between "regular" version and [Version2]?
    The [Version2] with part# ending with a "B" is simply a new revision of the model with an updated memory chip and firmware update, they have the exact same functionality and specifications. The [version 2] will be available in a longer time range and the "regular" version will phase out sooner. For a new project, we suggest to go with [Version2]


  • Mechanical Specification
    Interface SATA 3.0G
    Dimension(WxLxH) 30.0mm x 35.5mm x 9.5mm (WxLxH)

    Wear Leveling
    Flash memory can be erased a limited number of times. This number is called the erase cycle limit or write endurance limit and is defined by the flash array vendor. The erase cycle limit applies to each individual erase block in the flash device SATADOM D150QV-L wide temp uses a wear-leveling algorithm to ensure that consecutive writes of a specific sector are not written physically to the same page in the flash. This spreads flash media usage evenly across all pages, thereby maximizing flash lifetime.

    Environmental Specifications
    Operating Temperature Standard Grade: 00C to +700C
    Industrial Grade: -400C to +850C
    Storage Temperature -550C to +950C
    Shock(Operating) 1500G
    Vibration(Operarting) 20G
    Humidity 5-95%,non-condensing
    Conformal Coating Optional
    Write Protect Support

    Reliabily and Durability

     Reliability

     Test Conditions

    Vibration 7 Hz to 2KHz,  20G
    Mechanical Shock Duration: 0.5ms, 1500G, 3 Axes
     
    Product Condition MTBF(Hours)
    SATADOM D150QV-L TELECORDIA SR-332 GB, 250C >3,000,000

    Transfer mode and Power consumption
    Power Consumption Mode Power Consumption(mA)
    Read 190
    Write 230
    Idle 165

    Electrical Specification
    Power Requirement Item Symbol Rating Unit
    Input voltage VIN +5DC +-5% 500mA(max.) V