Industrial Storage // memorydepot.com

04GB SATADOM-SH 3ME with Pin7 VCC Supported DESSH-04GD07RC1SCF

SATA Disk on Module
4GB

Latest SATA DOM Serie SATA III interface ( Backward compatible with SATA I and SATA II )
Commercial Temp p Built-in Power Pin7

Innodisk SATADOM-SH 3ME is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance., Innodisk SATADOM-SH 3ME absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier. Innodisk SATADOM-SH 3ME effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

Features:
  • SATA 6Gb/s interface
  • iSMART disk health monitoring
  • Intelligent error recovery system
  • Excellent data transfer speed
  • Zero mechanical interference
  • Anti-vibration mechanical design

  • Product Informations

    Model Name: SATADOM-SH-3ME-F
    Interface: SATA III 6.0 Gb/s
    Type: Horizontal
    Flash Type: MLC
    Capacity: 4GB~32GB
    Max. Channels: 1
    Sequential R/W (MB/sec, max.): 100/40
    Max. Power consumption: 0.6 W (5V x 125 mA )
    Thermal Sensor: Wide Temp. only
    H/W Write Protect: No
    Pin7 Power: Yes
    ATA Security: Yes
    S.M.A.R.T.: Yes

    Reliabily and Durability

    Vibration: 20G@7-2000Hz
    Shock: 1500G@0.5ms
    MTBF: 3 million hours

    Environmental Specifications

    Storage Temperature: -550C ~ +950C
    Operation Temperature: Standard Grade: 00C ~ +700C
    Industrial Grade. OP: -400C ~ +850C

    Physical Characteristics

    Dimension (WxLxH/mm): 18.0 x 30.3 x 12.5
    Type: Horizontal

    Mechanical Specs