Industrial Storage // memorydepot.com

32GB SATADOM-MV 3IE iSLC 4 channel(s) 460MB/s DHSMV-32GD063C1QCF

SATA Disk on Module
32GB

iSLC technology : Best of both worlds: Budget friendly, more reliable, more performance than MLC flash. About 10 times more Program / Erase Cycle than MLC
Commercial Temp Built-in Power Pin 7

Innodisk SATADOM-MV 3ME is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. Regarding of mechanical interference, InnoDisk SATADOM-MV 3ME absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.

Innodisk SATADOM-MV 3ME effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

Features:
  • SATA 6Gb/s interface
  • iSMART disk health monitoring
  • Intelligent error recovery system
  • Excellent data transfer speed
  • Write protection security
  • Zero mechanical interference
  • Anti-vibration mechanical design

  • Product Informations

    Model Name: SATADOM-MV 3IE
    Interface: SATA III 6.0 Gb/s
    Type: Vertical
    Flash Type: iSLC
    Capacity: 8GB~64GB
    Max. Channels: 4
    Sequential R/W (MB/sec, max.): TBD
    Max. Power consumption: 1 W (5V x 200 mA )
    Thermal Sensor: Wide Temp. only
    H/W Write Protect: No
    Pin7 Power: Yes
    ATA Security: Yes
    S.M.A.R.T.: Yes

    Reliabily and Durability

    Vibration: 20G@7-2000Hz
    Shock: 1500G@0.5ms
    MTBF: 3 million hours

    Environmental Specifications

    Storage Temperature: -550C ~ +950C
    Operation Temperature: Standard Grade: 00C ~ +700C
    Industrial Grade. OP: -400C ~ +850C

    Physical Characteristics

    Dimension (WxLxH/mm): 25.2 X 41.5 X 6.8
    Type: Vertical