Industrial Storage // memorydepot.com

8GB InnoLite mSATA D150Q DRPS-08GJ30AC1DN

mSATA module
8GB


Commercial Temp

Budget friendly flash storage for semi-industrial applications, e.g. kiosk These InnoLite series is absolutely different from those SSDs for consumer market. This product line is Reliable, industrial-thinking, and passed serial comprehensive reliability tests.

InnoLite series stands out from consumer grade SSDs due to our reliability and industrial design. Our InnoLite MLC series passed all comprehensive reliability tests to ensure the highest quality for our customers. Not only are our innoLite Series products customized to fit specific needs, they are backed by our dedicated R&D support team and 2 years warranty as well

InnoLite mSATA D150Q is designed as the standard Mini PCIe form factor with SATA interface, and supports SATA II standard (3.0Gb/s) with good performance. The form factor is followed the MO-300 / MO-300B specification, established by JEDEC. Regarding of mechanical interference, InnoLite mSATA D150Q absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.

InnoLite mSATA D150Q effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.



What is the difference between "regular" version and [Version2]?
The [Version2] with part# ending with a "B" is simply a new revision of the model with an updated memory chip and firmware update, they have the exact same functionality and specifications. The [version 2] will be available in a longer time range and the "regular" version will phase out sooner. For a new project, we suggest to go with [Version2]


PRICING AND PRODUCT DETAILS
Mechanical Specification
Interface Support SATA II Interface with Compliant with Serial ATA Gen 1and Gen 2 Specifications

Performance (quad channel):
Read- 90 MB/sec. (max.)
Write- 30 MB/sec. (max.)
Capacity Provide 16GB, 32GB,64 GB within MLCs Flash ICs..

Wear Leveling
Flash memory can be erased a limited number of times. This number is called the erase cycle limit or write endurance limit and is defined by the flash array vendor. The erase cycle limit applies to each individual erase block in the flash device. InnoLite mSATA uses a wear-leveling algorithm to ensure that consecutive writes of a specific sector are not written physically to the same page in the flash. This spreads flash media usage evenly across all pages, thereby maximizing flash lifetime.

Environmental Specifications
Operating Temperature Standard Grade: 00C to +700C
Storage Temperature -550C to +950C
Shock(Operating) 1500G
Vibration(Operarting) 20G
Humidity 10-95%,non-condensing

Reliabily and Durability

 Reliability

Test Conditions

 Reference Standards

Vibration 7 Hz to 2KHz,  20G IEC 68-2-6
Mechanical Shock Duration: 0.5ms, 1500G, 3 Axes IEC 68-2-27
 
Product Condition MTBF(Hours)
InnoLite mSATA TELECORDIA SR-332 GB, 250C >3,000,000

Transfer mode and Power consumption
InnoLite mSATA uses a standard SATA pin-out.
  • PIO Mode: 0~4
  • Ultra DMA: 0~6
  • Serial ATA I 1.5Gbps
  • Serial ATA II 3.0Gbps

    Power Consumption Mode Power Consumption(mA)
    Read 190
    Write 230
    Idle 140

  • Electrical Specification
    Power Requirement Item Symbol Rating Unit
    Input voltage VIN +5DC +-5% 500mA(max.) V