Solid State Drives Hi-Speed 2.5 Flash Disk SATA 4000 Wide Temp

InnoDisk FiD 2.5 SATA4000 products provide high capacity flash memory Solid State Drive (SSD) that
electrically complies with Serial ATA (SATA) standard. InnoDisk FiD 2.5 SATA4000 support SATA I
standard (1.5Hz) with high performance. Sustain read is 37MB(Max) per second, and sustain write is
34MB(Max) per second. InnoDisk FiD 2.5 SATA4000 uses standard 2.5-inch form factor, which can be
used in laptop. InnoDisk FiD 2.5 SATA4000 is also designed for industrial field. The SSD have good
performance, and have small latency time. It effectively reduces the booting time of operation system and
the power consumption is less than hard disk drive (HDD). InnoDisk FiD 2.5 SATA4000 can work in
harsh environment. The SSD is vibration resistance, and can work in lower or higher temperature than HDD.
InnoDisk FiD 2.5 SATA4000 complies with ATA protocol, no additional drives are required, and the SSD
can be configured as a boot device or data storage device.

The SATA I bridge controller is 1.5 Gbps (Gen. 1), and support hot-plug. The main function is to bridge
between a legacy IDE storage device and a Serial ATA host. The Serial ATA physical, link and transport layers
are compliant with Serial ATA Gen 1 specification (Gen 1 supports 1.5Gbps data rate). The data burst rate
between SATA I bridge controller and ATA controller is 100MB/sec.

ATA Controller

The ATA controller is equipped with 12KB of internal memory that is used for storing data. The internal memory
can also be used as an intermediate memory for storing data blocks during a wear-leveling procedure. There
are 40KB of internal memory is used for code. A 10KB internal boot ROM includes basic routines for accessing
the flash memories and for loading the main code into the internal memory.

Error Detection and Correction

Highly sophisticated Error Correction Code algorithms are implemented. The ECC unit consists of the Parity
Unit (parity-byte generation) and the Syndrome Unit (syndrome-byte computation). This unit implements an
algorithm that can correct four bits per 512 bytes in an ECC block. Code-byte generation during write
operations, as well as error detection during read operation, is implemented on the fly without any speed
penalties.

Wear-Leveling

Flash memory can be erased within a limited number of times. This number is called the erase cycle limit or
write endurance limit and is defined by the flash array vendor. The erase cycle limit applies to each individual
erase block in the flash device.
InnoDisk FiD 2.5 SATA4000 uses a wear-leveling algorithm to ensure that consecutive writes of a specific
sector are not written physically to the same page/block in the flash. This spreads flash media usage evenly
across all pages, thereby extending flash lifetime.

Bad Blocks Management

Bad Blocks are blocks that contain one or more invalid bits whose reliability are not guaranteed. The Bad
Blocks may be presented while the SSD is shipped, or may develop during the life time of the SSD. The Bad
Blocks will not exceed more than 3% of the total device volume. When the Bad Blocks is detected, it will be
flagged, and not be used anymore. The SSD implement Bad Blocks management, Bad Blocks replacement,
Error Correct Code to avoid data error occurred. The functions will be enabled automatically to transfer data
from Bad Blocks to spare blocks, and correct error bit.

Solid State Drives Hi-Speed 2.5 Flash Disk SATA 4000

1.8 inch Industrial SATA SSD 2ME  1.8 inch Industrial SATA SSD 2ME Wide Temp  1.8" SATA SSD Industrial SSD 3SE SLC  1.8" SATA SSD Industrial SSD 3SE SLC Wide Temp  1.8" SATA SSD Industrial SSD 3SR-P SLC  1.8" SATA SSD Industrial SSD 3SR-P SLC Wide Temp  1.8" SATA SSD 3MG2-P with L95 (Industrial, Standard Grade, 0? ~ +70?)  1.8" SATA SSD 3MG2-P with L95 (Industrial, W/T Grade, -40? ~ +85?)  1.8" SATA SSD 3MG3-P w/ Toshiba 15nm (Industrial, Standard Grade, 0? ~ +70?)  1.8" SATA SSD 3MG3-P w/ Toshiba 15nm(Industrial, W/T Grade, -40? ~ +85?)  1.8" SATA SSD 3MR3-P w/ Toshiba 15nm (Industrial, W/T Grade, -40? ~ +85?)  1.8" SATA SSD 3MR3-P w/ Toshiba 15nm(Industrial, Standard Grade, 0? ~ +70?)  1.8" SATA SSD 3SE (Industrial, Standard Grade, 0? ~ +70?)  1.8" SATA SSD 3SE(Industrial, W/T Grade, -40 ~ 85?, Thermal Sensor)  1.8" SATA SSD 3SE3-P (Industrial, Standard Grade, 0? ~ +70?)  1.8" SATA SSD 3SE3-P(Industrial, W/T Grade, -40 ~ 85?, Thermal Sensor)  1.8" SATA SSD 3SR-P( High IOPS, Industrial, W/T Grade, -40 ~ 85?, Thermal Sensor)  1.8" SATA SSD 3SR-P(High IOPS, Industrial, Standard Grade, 0? ~ +70?)  2.5 SATA 10000 plus Hi-Speed Solid State Flash Disk  2.5 SATA 10000 plus Hi-Speed Solid State Flash Disk Wide Temp  2.5" SATA SSD Industrial SSD 3SE SLC Wide Temp  2.5" SATA SSD Industrial SSD 3SE-P SLC  2.5" SATA SSD Industrial SSD 3SE-P SLC  2.5" SATA SSD Industrial SSD 3SE-P SLC Wide Temp  2.5" SATA SSD Industrial SSD 3SE-P SLC Wide Temp  2.5" SATA SSD Industrial SSD 3SR-P SLC  2.5" SATA SSD Industrial SSD 3SR-P SLC Wide Temp  2.5" SATA SSD 3IE2-P w/ Toshiba 15nm (iCell, Industrial, W/T Grade, -40? ~ +85?)  2.5" SATA SSD 3IE2-P w/ Toshiba 15nm( iCell, Industrial, Standard Grade, 0? ~ +70?)  2.5" SATA SSD 3IE3 w/ Toshiba 15nm (Industrial, W/T Grade, -40? ~ +85?)  2.5" SATA SSD 3IE3 w/ Toshiba 15nm(Industrial, Standard Grade, 0? ~ +70?)  2.5" SATA SSD 3IE4 w/ Toshiba 15nm(Industrial, Standard Grade, 0? ~ +70?)  2.5" SATA SSD 3IE4 w/ Toshiba 15nm(Industrial, W/T Grade, -40? ~ +85?)  2.5" SATA SSD 3ME2 w/ Toshiba 15nm (Industrial, Standard Grade, 0? ~ +70?)  2.5" SATA SSD 3ME3 w/ Toshiba 15nm(Industrial, Standard Grade, 0? ~ +70?)  2.5" SATA SSD 3ME3 w/ Toshiba 15nm(Industrial, W/T Grade, -40? ~ +85?)  2.5" SATA SSD 3ME4 w/ Toshiba 15nm(Industrial, Standard Grade, 0? ~ +70?)  2.5" SATA SSD 3ME4 w/ Toshiba 15nm(Industrial, W/T Grade, -40? ~ +85?)  2.5" SATA SSD 3MG2-P with L95 (High IOPS, Industrial, Standard Grade, 0? ~ +70?)  2.5" SATA SSD 3MG2-P with L95(High IOPS, Industrial, W/T Grade, -40? ~ +85?)  2.5" SATA SSD 3MG2-P with L95(iCell, High IOPS, Industrial, W/T Grade, -40? ~ +85?)  2.5" SATA SSD 3MG2-P_AES with L95 (High IOPS, Industrial, Standard Grade, 0? ~ +70?)  2.5" SATA SSD 3MG2-P_AES with L95(High IOPS, Industrial, W/T Grade, -40? ~ +85?)  2.5" SATA SSD 3MR3-P w/ Toshiba 15nm(iCell, High IOPS, Industrial, Standard Grade, 0? ~ +70?)  2.5" SATA SSD 3MR3-P w/ Toshiba 15nm(iCell, High IOPS, Industrial, W/T Grade, -40? ~ +85?)  2.5" SATA SSD 3SE (Industrial, W/T Grade, -40 ~ 85?, Thermal Sensor)  2.5" SATA SSD 3SE(Industrial, Standard Grade, 0? ~ +70?)  2.5" SATA SSD 3SE-P(iCell, High IOPS, Industrial, Standard Grade, 0? ~ +70?)  2.5" SATA SSD 3SE-P(iCell, High IOPS, Industrial, W/T Grade, -40 ~ 85?, Thermal Sensor)  2.5" SATA SSD 3SE3 (Industrial, W/T Grade, -40 ~ 85?, Thermal Sensor)  2.5" SATA SSD 3SR-P((iCell, High IOPS, Industrial, W/T Grade, -40 ~ 85?, Thermal Sensor)  2.5" SATA SSD 3SR-P(iCell, High IOPS, Industrial, Standard Grade, 0? ~ +70?)  2.5" SATA SSD 3SR3-P (iCell, High IOPS, Industrial, Standard Grade, 0? ~ +70?)  2.5" SATA SSD 3SR3-P((iCell, High IOPS, Industrial, W/T Grade, -40 ~ 85?, Thermal Sensor)  FiD 1.8" Industrial SSD SATA D150 SSD SLC  FiD 1.8" SATA Industrial SSD D150 SSD SLC Wide Temp  FiD 1.8" SATA Industrial SSD 25000 SL Wide Temp  FiD 1.8" SATA Industrial SSD 25000 SLC  FiD 2.5" SATA 25000 with Toshiba(iCell, Industrial, W/T Grade, -40 ~ 85?, Thermal Sensor)  Industrial 2.5 SATA SSD 3MG-P MLC  Industrial 2.5'' SATA SSD 3IE iSLC  Industrial 2.5'' SATA SSD 3IE iSLC Wide Temp  Industrial 1.8 SATA SSD 3ME MLC  Industrial 1.8 SATA SSD 3ME MLC Wide Temp  Industrial 1.8 SATA SSD 3MR-P MLC  Industrial 2.5 SATA SSD 3ME MLC  Industrial 2.5 SATA SSD 3ME MLC Wide Temp  Industrial 2.5 SATA SSD 3ME2  Industrial 2.5 SATA SSD 3ME2 Wide Temp  Industrial 2.5 SATA SSD 3MG-P iCell MLC Wide Temp  Industrial 2.5 SATA SSD 3MG-P iCell MLC  Industrial 2.5 SATA SSD 3MG-P MLC Wide Temp  Industrial 2.5 SATA SSD 3MG2-P iCell  Industrial 2.5 SATA SSD 3MG2-P iCell Wide Temp  Industrial 2.5 SATA SSD 3MG2-P with L95  Industrial 2.5 SATA SSD 3MG2-P with L95 Wide Temp  Industrial 2.5 SATA SSD 3MG2-P with L95 Wide Temp with icell  Industrial 2.5 SATA SSD 3MG2-P with L95 with icell  Industrial 2.5 SATA SSD 3MR-P MLC  Industrial 2.5 SATA SSD 3MR-P MLC Wide Temp  Industrial nanoSSD 3IE DEMO KIT iSLC 3  Industrial nanoSSD 3ME MLC 4  InnoLite II 2.5'' SATA SSD  InnoLite II 2.5'' SATA SSD Wide Temp  InnoRobust II Industrial SSD 1.8" SATA SSD SLC  InnoRobust II Industrial SSD 1.8" SATA SSD SLC Wide Temp  iSLC Solid State Drives 2.5 Flash Disk SATA 2IE  Slim SSD 3ME MLC  Slim SSD 3ME3 w/ Toshiba 15nm(Industrial, Standard Grade, 0? ~ +70?)  Slim SSD 3ME3 w/ Toshiba 15nm(Industrial, W/T Grade, -40? ~ +85?)  Slim SSD 3ME4 w/ Toshiba 15nm(Industrial, Standard Grade, 0? ~ +70?)  Slim SSD 3ME4(Industrial, W/T Grade, -40? ~ +85?)  Solid State Drives 2.5 Flash Disk EverGreen 2.5'' SATA SSD  Solid State Drives 2.5 Flash Disk EverGreen Plus 2.5'' SATA SSD  Solid State Drives 2.5 Flash Disk EverGreen Plus 2.5'' SATA SSD Wide Temp  Solid State Drives 2.5 Flash Disk SATA EVERGREEN Wide Temp  Solid State Drives 2.5 Flash Disk SATA III 3SE SLC Embedded  Solid State Drives Hi-Speed 2.5 Flash Disk SATA 4000  Solid State Drives Hi-Speed 1.8 Flash Disk SATA D150  Solid State Drives Hi-Speed 1.8 Flash Disk SATA D150 Wide temp  Solid State Drives Hi-Speed 2.5 Flash Disk SATA 25000 Industrial  Solid State Drives Hi-Speed 2.5 Flash Disk SATA 25000 Wide Temp  Solid State Drives Hi-Speed 2.5 Flash Disk SATA 4000 Wide Temp  Solid State Drives Hi-Speed 2.5 Flash Disk SATA INNOROBUST II  Solid State Drives Hi-Speed 2.5 Flash Disk SATA INNOROBUST II Wide Temp  Solid State Drives Innorobust II 2.5 Flash Disk SATA SSD MLC  Solid State Drives Innorobust II 2.5 Flash Disk SATA SSD MLC Wide Temp  Solid State Drives SATA III Hi-Speed and IOPS 2.5 Flash Disk SATA SSD MLC

Looking for pricing? You can get sample price by clicking on the "details" button on each capacity. If you need to get a budgetary price for your project, please contact us

Need technical info or advices? Our mission is to help you finalizing your project successfully. By giving you some advices, we can help you reducing cost and time to market Here is where you can reach us

Need more info ? Ask us! Name:     Email:       Phone:   Question/Inquiry:   Do you want to be contacted by: Phone     e-mail                                       Enter the verification code above into this field: