Industrial Storage // memorydepot.com

8GB InnoLite SATA Slim D150Q Wide Temp D1SS-08GJ30AW1DN

SATA SLIM SSD
8GB


Wide Temp

Budget friendly flash storage for semi-industrial applications, e.g. kiosk These InnoLite series is absolutely different from those SSDs for consumer market. This product line is Reliable, industrial-thinking, and passed serial comprehensive reliability tests.

InnoLite series stands out from consumer grade SSDs due to our reliability and industrial design. Our InnoLite MLC series passed all comprehensive reliability tests to ensure the highest quality for our customers. Not only are our innoLite Series products customized to fit specific needs, they are backed by our dedicated R&D support team and 2 years warranty as well

InnoLite CFast D150Q supports SATA II standard (3.0Gb/s) interface with good performance and thus performs faster data transfer rate.

InnoLite CFast D150Q is suitable in industrial field. It effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD). InnoLite CFast D150Q can work under harsh environment. InnoLite CFast D150Q complies with ATA protocol, no additional drives are required, and the

SSD can be configured as a boot device or data storage device.

PRICING AND PRODUCT DETAILS
Mechanical Specification

Interface: Support SATA II Interface with Compliant with Serial ATA Gen 1
Capacity: Provide 16GB, 32GB,64 GB within MLCs Flash ICs.
Performance (quad channel):
Read- 90 MB/sec. (max.)
Write- 30 MB/sec. (max.)

Wear Leveling
Flash memory can be erased a limited number of times. This number is called the erase cycle limit or write endurance limit and is defined by the flash array vendor. The erase cycle limit applies to each individual erase block in the flash device. InnoLite CFast D150Qw uses a wear-leveling algorithm to ensure that consecutive writes of a specific sector are not written physically to the same page in the flash. This spreads flash media usage evenly across all pages, thereby maximizing flash lifetime.

Environmental Specifications
Operating Temperature Range
  • Standard Grade: 0innolite-sataslimD150QwC to +70innolite-sataslimD150QwC
     Storage Temperature Range: -55innolite-sataslimD150QwC to +95innolite-sataslimD150QwC
    Relative Humidity: 10-95% , Non-Condensing
    		•

    Reliabily and Durability

     Reliability

    		 Test Conditions

     Reference Standards
    Vibration 7 Hz to 2KHz, 5G,    3 axes IEC 68-2-6
    Mechanical Shock Duration: 10ms, 50G, 3 Axes IEC 68-2-27
     
    Product Condition MTBF(Hours)
    InnoLite CFast D150Qw TELECORDIA SR-332 GB, 250C >3,000,000

    Transfer mode and Power consumption
    InnoLite CFast D150Qwuses a standard SATA pin-out. See List forInnoLite CFast D150Qw pin assignments.
  • PIO Mode: 0~4
  • Ultra DMA: 0~6
  • Serial ATA I 1.5Gbps
  • Serial ATA II 3.0Gbps

    Power Consumption Mode Power Consumption(mA)
    Read 190
    Write 230
    Idle 140


    • Electrical Specification
    Power Requirement Item Symbol Rating Unit
    Input voltage VIN +5DC +-5% 500mA(max.) V


    Mechanical Diagram