Industrial Storage // memorydepot.com

8GB SATA SLIM SSD D150Q Quad Channel Wide Temp D1SS-08GJ30AW1QS

SATA SLIM SSD
8GB


Wide Temp

The SATA Slim is designed to comply with JEDEC SFF-8156 standard form factor, which is extremely suitable for portable / hand-held devices or thin clients. Moreover, its standard 7+15 pin SATA interface could support most of the platform with standard SATA port. InnoDisk SATA Slim operates under SATA II (3.0Gb/s) protocol with good performance, the sustain read/write can reach up to 125/120MB per second (max).

The SATA Slim is also suitable in industrial field. It effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD). InnoDisk SATA Slim complies with ATA protocol, no additional drivers are required, and the SATA Slim can be configured as a boot device or data storage device.

InnoDisk SATA Slim D150Q is designed with standard SATA interface (7+15 SATA connector), which could support most platforms with standard SATA port. Besides, with its smaller dimension, SATA Slim D150Q is an alternative solution of 2.5” SSD for those embedded system that may have mechanical and space concerns.

InnoDisk SATA Slim D150Q operates under SATA II (3.0Gb/s) protocol with good performance, the sustain read/write can reach up to 130/125MB per second (max).

InnoDisk SATA Slim D150Q is also suitable in industrial field. It effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD). InnoDisk SATA Slim D150Q complies with ATA protocol, no additional drivers are required, and the SATA Slim can be configured as a boot device or data storage device.



What is the difference between "regular" version and [Version2]?
The [Version2] with part# ending with a "B" is simply a new revision of the model with an updated memory chip and firmware update, they have the exact same functionality and specifications. The [version 2] will be available in a longer time range and the "regular" version will phase out sooner. For a new project, we suggest to go with [Version2]


PRICING AND PRODUCT DETAILS
General Specifications
Connector Type   SATA connector uses a 7-pin signal and AA 15-pin power segment
Flash Type SLC(Single Level Cell)
Density 2GB,4GB,8GB,16GB,32GB
Transfer Mode SATA II, SATA I, PIO 0-4,
MDMA 0-2, UDMA 0-6
Sustained R/W Performance Read: 135 MB/sec(max.)
Write: 130 MB/sec(max.)

Environmental Specifications
DC Input  +3.3V DC 5%
Power Consumption(Max.) Read: 180 mA
Write: 200 mA
Idle: 110mA
Operating Temp. 00C-+700C(Standard Grade)
-400C-+850C(Industrial Grade)
Storage Temp. -550C-+950C
Humidity Relative Humidity: 10-95%,non-condesing
Flash Endurance 100,000 program/erase cycles
MTBF >3,000,000 hours
Certification CE,FCC,RoHS
Warranty 5 years

Mechanical Specifications
Dimension(WxLxH) 39mm x 54mm x 3.4mm
Weight 9g 2g
Vibration 7 Hz to 2K Hz, , 3 axes
Shock 0.5ms, 1500G, 3 axes

Mechanical Specs