Industrial Storage // memorydepot.com

04GB FiD 1.8" SATA D150 SSD SLC 4 Channel(s) 90 MB/s D1ST2-04GJ30AC1QB

Industrial SATA Solid State Flash Disk
4GB


Commercial Temp

The FiD 1.8"SATA D150 is an entry-level SLC SSD that supports most standard SATA port platforms. This economic SSD can save up to half the space inside a motherboard. The FiD 1.8" SATA D150 operates under SATA II (3.0Gb/s) protocol, delivering good performance and sustained read and write speeds of up to 130MB and 120MB per second respectively.
The Innodisk FiD 1.8"SATA D150 SSD provides manufacturers with an effective replacement for hard disk drives (HDDs).
  • Good performance, small seek time, and no latency time
  • Reduces boot time of the operation system
  • Consumes less power than an HDD
  • Able to work in lower or higher temperatures than an HDD

    Features:
  • 1.8" housing
  • 7+15 pin SATA
  • Low power consumption

  • Product Informations

    Model Name: FiD 1.8"SATA D150 SSD
    Interface: SATA II 3.0Gb/s
    Type: 1.8"
    Flash Type: SLC
    Capacity: 2GB~64GB
    Max. Channels: 4
    Sequential R/W (MB/sec, max.): 130/120
    Max. Power consumption: 1W (5V X200 mA)
    Thermal Sensor: Optional
    External DRAM Buffer: No
    ATA Security: Yes
    Conformal Coating No
    S.M.A.R.T.: Yes

    Reliabily and Durability

    Vibration: 20G@7-2000Hz
    Shock: 1500G@0.5ms
    MTBF: 3 million hours

    Environmental Specifications

    Storage Temperature: -550C ~ +950C
    Operation Temperature: Standard Grade: 0oC ~ +70oC
    Industrial Grade. OP: -40oC ~ +85oC

    Physical Characteristics

    Dimension (WxLxH/mm): 69.8X 50.0 X 9.3
    Type: 1.8"


    Mechanical Specs