Industrial Storage // memorydepot.com

32GB Cfast D150Q [Version 2] 130MB/s Wide Temp DC1T-32GJ30AW2QB

Industrial SATA CFAST Cards
32GB

CFast is based on the Serial ATA bus rather than the Parallel ATA bus. These Industrial CFAST cards have same dimension as a CF Cards but with a SATA interface. Improved, unmatched write/read performance number over the traditional CompactFlashTM Card
Wide Temp

InnoDisk CFast D150Q supports SATA II standard (3.0Gb/s) interface with good performance and thus performs faster data transfer rate. Sustain read can reach up to 125MB per second (max), and sustain write reach up to 110MB per second (max).

InnoDisk CFast D150Q is suitable in industrial field. It effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD). InnoDisk CFast D150Q can work under harsh environment. InnoDisk CFast D150Q complies with ATA protocol, no additional drives are required, and the SSD can be configured as a boot device or data storage device.



What is the difference between "regular" version and [Version2]?
The [Version2] with part# ending with a "B" is simply a new revision of the model with an updated memory chip and firmware update, they have the exact same functionality and specifications. The [version 2] will be available in a longer time range and the "regular" version will phase out sooner. For a new project, we suggest to go with [Version2]


PRICING AND PRODUCT DETAILS
General Specifications
Connector Type   SATA connector uses a 7-pin signal and AA 17-pin power segment
Flash Type SLC(Single Level Cell)
Density 2GB,4GB,8GB,16GB,32GB
Transfer Mode SATA II, SATA I, PIO 0-4,
MDMA 0-2, UDMA 0-6
Sustained R/W Performance Read: 135 MB/sec(max.)
Write: 130 MB/sec(max.)

Environmental Specifications
DC Input  +3.3V DC 5%
Power Consumption(Max.) Read: 180 mA
Write: 200 mA
Idle: 110mA
Operating Temp. 00C-+700C(Standard Grade)
-400C-+850C(Industrial Grade)
Storage Temp. -550C-+950C
Humidity Relative Humidity: 10-95%,non-condesing
Flash Endurance 100,000 program/erase cycles
MTBF >3,000,000 hours
Certification CE,FCC,RoHS
Warranty 5 years

Mechanical Specifications
Dimension(WxLxH) 36.4mm x 42.8mm x 3.6mm
Weight 10g 2g
Vibration 7 Hz to 2K Hz, , 3 axes
Shock 0.5ms, 1500G, 3 axes