Industrial Storage // memorydepot.com

4GB EDC9000 Disk on Module DOM 40pin 50MB/s DE0H-04GD71ACADS

IDE Disk on Module 40 Pin Vertical
4GB

Vertical Model - with housing - provided with power cable
Commercial Temp

The Latest Generation Disk on Module with Outstanding Performance and Durability. Extremely light weight, reliable & performant, This new generation IDE Flash Module is the most flexible solution to provide reliable storage on space limited and hostile environnment. Decreasing data access time and replacing any moving part from a traditional hard drive, the Flash Disk on Module fit the needs of a wide range of application. Wide temp version -40c +85c
80MB/s Read    75MB/s Write

Fully support of PIO 0-4/Multiword DMA 0-2/Ultra DMA 0-6 modes
IDE Master/Slave select
Power Cable included
Static Wear-Leveling Function
Bad Block Management & Error-Correction Code
DOS/WinCE/Linux/WinXPe bootable
Available in 2GB to 16GB

100% Compatible with the Standard IDE ATA interface, this unit works exaclty like a standard hard drive but without any moving part, strongly increasing reliability and improving data access speed performance, without any noise.



Model variation
Disk on Module 40pin Vertical Industrial
Disk on Module 40pin Vertical Wide temp
Disk on Module 44pin Vertical Industrial
Disk on Module 44pin Vertical Wide temp


PRICING AND PRODUCT DETAILS
Product Informations

Model Name: EDC 9000 Vertical Type
Interface: PATA
Type: Vertical
Flash Type: SLC
Connector: 40/44 pin
Capacity: 128MB~16GB
Max. Channels: 2
Sequential R/W (MB/sec, max.): 40/25
Max. Power consumption: 0.75W(5V x 150mA)/0.5W(3.3V x 150mA)
H/W Write Protect: Yes
ATA Security: Yes
S.M.A.R.T.: Yes

Reliabily and Durability

Vibration: 20G@7~2000Hz
Shock: 1500G@0.5ms
MTBF: 3 million hours

Environmental Specifications

Storage Temperature: -550C ~ +950C
Operation Temperature: Standard Grade: 00C ~ +700C
Industrial Grade. OP: -400C ~ +850C

Physical Characteristics

Dimension (WxLxH/mm): 40 pin: 60.2 x 27.3 x 6.4
44 pin: 50.3 x 27.3 x 5.8

Type: Vertical

Mechanical Specs