Industrial Storage // memorydepot.com

16GB CFast 3ME3 DECFA-16GD09SC1DC

Industrial SATA CFAST Cards
16GB

CFast is based on the Serial ATA bus rather than the Parallel ATA bus. These Industrial CFAST cards have same dimension as a CF Cards but with a SATA interface. Improved, unmatched write/read performance number over the traditional CompactFlashTM Card
Commercial Temp

The Innodisk CFast 3ME3 operates at SATA III 6.0 Gb/s, which offers data transfer rate of read up to 200MB/s. and of sequential write up to 110MB/s. Compliant with CFast 2.0 standard, it is designed with 7+17 pin connector and is SATA compatible. Due to the idle power saving, it reduces 30% power consumption. CFast 3ME3 is featured as small form factor, and suitable for most industrial application.

CFast 3ME3 can work under harsh environment, and complies with ATA protocol. Without additional drives, the disk can be configured as a boot device or data storage device. CFast 3ME3 support hardware write protect to prevent modification of valuable data on a device. Besides, through Innodisk's enhanced power cycling technology and more capacitors, CFast 3ME3 prevents data loss caused by sudden power failure. By using Innodsik's iSMART, users can not only monitor the operation status of SSD, but also visualize Wear-Leveling status with graphics.

Features
  • Innovative Firmware Algorithm
  • DRAM-less, 100% data integrity
  • Excellent random performance
  • Wide Temperature: -40?~85 ?
  • Supports TRIM/NCQ/SMART
  • Built in iData Guard

  • Product Informations

    Model Name: CFast 3ME3
    Interface: SATA III 6.0 Gb/s
    Type: Standard
    Flash Type: MLC
    Capacity: 8GB~128GB
    Max. Channels: 2
    Sequential R/W (MB/sec, max.): 200/110
    Max. Power consumption: 1.1W
    Thermal Sensor: ST- Optional / WT- Default
    H/W Write Protect: Optional
    S.M.A.R.T.: Yes

    Reliabily and Durability

    Vibration: 20G@7~2000Hz
    Shock: 1500G@0.5ms
    MTBF: 3 million hours

    Environmental Specifications

    Storage Temperature: -550C ~ +950C
    Operation Temperature: Standard Grade: 00C ~ +700C
    Industrial Grade. OP: -400C ~ +850C

    Physical Characteristics

    Dimension (WxLxH/mm): 42.8 x 36.4 x 3.6
    Type: Standard