Industrial Storage // memorydepot.com

DECFS-08GD07SC1SC 08GB CF-SATA 3ME MLC channel(s) 1MB/s DECFS-08GD07SC1SC

SATA Industrial CF Card ( CF SATA )
8GB

CF-SATA
Commercial Temp

The Innodisk CFast 3ME operates at SATA III 6.0 Gb/s, which offers data transfer rate of read up to 310MB/sec. and of sequential write up to 150MB/s. Compliant with CFast 2.0 standard, it is designed with 7+17 pin connector and is SATA compatible. Due to the idle power saving, it reduces 35% power consumption. CFast 3ME is featured as small form factor, and suitable for most industrial application.

CFast 3ME can work under harsh environment, and complies with ATA protocol. Without additional drives, the disk can be configured as a boot device or data storage device. CFast 3ME support hardware write protect to prevent modification of valuable data on a device. Besides, through Innodisk's enhanced power cycling technology and more capacitors, CFast 3ME prevents data loss caused by sudden power failure. By using Innodsik's iSMART, users can not only monitor the operation status of SSD, but also visualize Wear-Leveling status with graphics.

Features:
  • SATA III interface
  • Extremely low power consumption
  • iSMART disk health monitoring
  • Intelligent error recovery system
  • Excellent data transfer speed
  • Hardware write protect
  • Enhanced power cycling management

  • Product Informations

    Model Name: CFast 3ME
    Interface: SATA III 6.0 Gb/s
    Type: Standard
    Flash Type: MLC
    Capacity: 4GB~128GB
    Max. Channels: 2
    Sequential R/W (MB/sec, max.): 310 / 150
    Max. Power consumption: 1.1W
    Thermal Sensor: ST- Optional / WT- Default
    H/W Write Protect: Yes
    S.M.A.R.T.: Yes

    Reliabily and Durability

    Vibration: 20G@7~2000Hz
    Shock: 1500G@0.5ms
    MTBF: >3 million hours

    Environmental Specifications

    Storage Temperature: -550C ~ +950C
    Operation Temperature: Standard Grade: 00C ~ +700C Industrial Grade: 400C ~ +850C

    Physical Characteristics

    Dimension (WxLxH/mm): 42.8 x 36.4 x 3.6 mm
    Type: Standard

    Mechanical Specs