Industrial Storage //

64GB SATADOM-ML 3ME3 with Pin7 VCC Supported w/ Toshiba 15nm(Industrial, Industrial, W/T Grade, -40 DESML-64GD08BW1DCF

SATA Disk on Module

Wide Temp with Pin7 VCC Supported w/ Toshiba 15nm

Innodisk Serial ATA Disk on Module (SATADOM) supports SATA III standard (6.0Gb/s) interface with excellent performance, and SATADOM-ML 3ME3 is designed as the smallest form factor size that could enhance compatibility with various design applications. Particularly the 7th pin of standard SATA 7pin connector can optionally be the built-in power VCC pin.

Innodisk SATADOM-ML 3ME3 effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

  • Best boot drive solution for server and embedded system
  • SATA 6Gb/s interface
  • High IOPS to reduce boot up timing
  • Built-in Pin 7 power supply
  • Intelligent error recovery system
  • Zero mechanical interference
  • Anti-vibration mechanical design
  • iSMART disk health monitoring

  • Product Informations

    Model Name: SATADOM-ML 3ME3 W
    Interface: SATA III 6.0 Gb/s
    Type: Vertical
    Flash Type: MLC
    Capacity: 16GB~128GB
    Max. Channels: 4
    Sequential R/W (MB/sec, max.): 16GB~128GB
    Max. Power consumption: 2A (5V x 400mA )
    Thermal Sensor: ST- Optional / WT- Default
    H/W Write Protect: Yes
    Pin7 Power: Yes
    Pin8 Power: No
    ATA Security: Yes
    S.M.A.R.T.: Yes

    Reliabily and Durability

    Vibration: 20G@7~2000Hz
    Shock: 1500G@0.5ms
    MTBF: 3 million hours

    Environmental Specifications

    Storage Temperature: -550C ~ +950C
    Operation Temperature: Standard Grade: 00C ~ +700C
    Industrial Grade. OP: -400C ~ +850C

    Physical Characteristics

    Dimension (WxLxH/mm): 35.5 x 30.0 x 10.8
    Type: Vertical