Industrial Storage // memorydepot.com

32GB CFast 3IE iSLC 2 channel(s) 310MB/s Wide Temp DHCFA-32GD073W2DC

Industrial SATA CFAST Cards
32GB

CFast is based on the Serial ATA bus rather than the Parallel ATA bus. These Industrial CFAST cards have same dimension as a CF Cards but with a SATA interface. Improved, unmatched write/read performance number over the traditional CompactFlashTM Card
Wide Temp

iSLC [3IE series], designed to outdo the endurance, performance and reliability of MLC-based solutions. Through the use of flash management algorithms, iSLC improves SSD endurance up to 20,000 times, increasing lifespans up to 10 times longer than MLC-based solutions. In addition, iSLC improves the performance of solid state drives, with similar write performance of SLC-based solutions, and with data quality that is on par with SLC technologies. The Innodisk iSLC series is cost efficient, boasting excellent benefits at only half the price of SLC-based solutions.

CFast 3IE can work under harsh environment, and complies with ATA protocol. Without additional drives, the disk can be configured as a boot device or data storage device. CFast 3ME support hardware write protect to prevent modification of valuable data on a device. Besides, through Innodisk's enhanced power cycling technology and more capacitors, CFast 3IE prevents data loss caused by sudden power failure. By using Innodsik's iSMART, users can not only monitor the operation status of SSD, but also visualize Wear-Leveling status with graphics.

  • iSLC technology
  • SATA III interface
  • Extremely low power consumption
  • iSMART disk health monitoring
  • Intelligent error recovery system
  • Excellent data transfer speed
  • Hardware write protect
  • Enhanced power cycling management

  • Product Informations

    Model Name: CFast 3IE wide Temp
    Interface: SATA III 6.0 Gb/s
    Type: Standard
    Flash Type: iSLC
    Capacity: 8GB~64GB
    Max. Channels: 2
    Sequential R/W (MB/sec, max.): 310 / 280
    Max. Power consumption: 1.1W
    Thermal Sensor: ST- Optional / WT- Default
    H/W Write Protect: Yes
    S.M.A.R.T.: Yes

    Reliabily and Durability

    Vibration: 20G@7~2000Hz
    Shock: 1500G@0.5ms
    MTBF: 3 million hours

    Environmental Specifications

    Storage Temperature: -550C ~ +950C
    Operation Temperature: Standard Grade: 00C ~ +700C Industrial Grade: 400C ~ +850C

    Physical Characteristics

    Dimension (WxLxH/mm): 42.8 x 36.4 x 3.6
    Type: Standard

    Mechanical Specs