Industrial Storage // memorydepot.com

8GB SATADOM D150SV-L DES8-08GJ30ACADS

SATA Disk on Module
8GB

Vertical Low Profile - will fit 1U case - These models support 2 power option at the same time: Power from SATA Port Pin 7 ( check if your motherboard supports that ) and external power cable supplied with the unit ( universal )
Commercial Temp Low Profile

The SATA DOM D150S product line is the latest generation of SLC SATA Disk on Module. Connected directly to the motherboard. It supports SATA II Standard (3.0Gb/s) interface with excellent and fast data transfer rate; in sustain read 25MB/s (max.) and sustain write 15MB/s (max.). Moreover, Innodisk SATADOM is the smallest form factor in the world that enhances functionality with various design applications.

Features:
  • Zero Mechanical Interference
  • High Reliability
  • Anti-Vibration Connector Design
  • Build-in Power Pin Design
  • Intelligent Wear Leveling
  • Auto ECC Function

    Available in 128MB to 16GB

    InnoDisk SATADOM D150S is also suitable in industrial field. It effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD). InnoDisk SATADOM D150S can work under harsh environment and complies with ATA protocol, no additional drives are required, and the SSD can be configured as a boot device or data storage device.



  • Mechanical Specification

    Interface: Support SATA II Interface with Compliant with Serial ATA Gen 1
    Capacity: Provide 128MB, 256MB, 512MB, 1GB, 2GB, 4GB, 8GB within SLCs

    Wear Leveling
    Flash memory can be erased a limited number of times. This number is called the erase cycle limit or write endurance limit and is defined by the flash array vendor. The erase cycle limit applies to each individual erase block in the flash device. InnoDisk SATADOM D150SV-L uses a wear-leveling algorithm to ensure that consecutive writes of a specific sector are not written physically to the same page in the flash. This spreads flash media usage evenly across all pages, thereby maximizing flash lifetime.

    Environmental Specifications
    Operating Temperature Range
  • Standard Grade: 00C to +700C
  • Industrial Grade: -4-400C to +850C
    Storage Temperature Range: -550C to +950C
    Relative Humidity: 10-95% , Non-Condensing

  • Reliabily and Durability

     Reliability

     Test Conditions

    Vibration 7 Hz to 2KHz, 5G,    3 axes
    Mechanical Shock Duration: 10ms, 50G, 3 Axes
     
    Product Condition MTBF(Hours)
    InnoDisk SATADOM D150SV-L TELECORDIA SR-332 GB, 250C >4,000,000

    Transfer mode and Power consumption
    InnoDisk SATADOM D150SV-L uses a standard SATA pin-out. See List for InnoDisk SATADOM D150SV-L pin assignments.
  • PIO Mode: 0~4
  • Ultra DMA: 0~6
  • Serial ATA I 1.5Gbps
  • Serial ATA II 3.0Gbps

    Power Consumption Mode Power Consumption(mA)
    Read 165
    Write 165
    Idle 70


  • Electrical Specification
    Power Requirement Item Symbol Rating Unit
    Input voltage VIN +5DC +-5% 500mA(max.) V
    Mechanical Diagram