Embedded Disk Card 4000 (EDC4000) products provide high capacity solid-state flash memory that electrically complies with the Personal Computer Memory Card International Association ATA standard. InnoDisk Embedded Disk Card 4000 (EDC4000) is embedded solid-state data storage systems for industrial work place. Embedded Disk Card 4000 (EDC4000) features an extremely light weight, reliable, low-profile form factor. Embedded Disk Card 4000 (EDC4000) supports advanced PIO (0-4), Multi Word DMA (0-2), Ultra DMA (0-4) transfer modes, multi-sector transfers, and LBA addressing.

Embedded Disk Card 4000 (EDC4000) is available in capacities ranging from 32MB to 8GB, making the upgrade path simple and fast. Available in 40-pin and 44-pin horizontal connector packages, EDC4000 fits into any platform with an IDE connector.

Interface: 40pin or 44pin IDE/ATA Capacity: 32MB~8GB Data transfer rate: Single: Read- 20MB/sec., Write- 10MB/sec. Dual: Read- 40MB/sec., Write- 20MB/sec. Burst Speed Rate: 66.6MB/sec. Low Power Consumption: 150mA DC Input Voltage: +3.3V/+5V Single power supply Dimension: 60.2/6.4/27.79 mm (W/T/H) Power Mode: Auto stand-by mode

No additional device drivers are required. Embedded Disk Card 4000 (EDC4000) can be configured as a boot device.

The 40-pin EDC4000 version has a separate connector for the power supply, to which a power supply cable can be connected. In addition, pin 20 can also be used for power supply connections. Please refer to the pin description for further details.

Flash memory can be erased a limited number of times. This number is called the erase cycle limit or write endurance limit and is defined by the flash array vendor. The erase cycle limit applies to each individual erase block in the flash device. EDC4000 uses a wear-leveling algorithm to ensure that consecutive writes of a specific sector are not written physically to the same page in the flash. This spreads flash media usage evenly across all pages, thereby maximizing flash lifetime.

Operating Temperature Range Standard Grade: 00C to +700C Industrial Grade: -400C to +850C Storage Temperature Range Standard Grade: -550C to +950C Industrial Grade: -550C to +950C

Reliability Test Conditions Vibration: 7 Hz to 2 KHz, 5 g, 3 axes Mechanical Shock Duration: 10ms, 50 g, 3 axes Product Condition MTBF (Hours): EDC4000 Telcordia SR-332 GB, 250C > 3,000,000

Disk on Module Hi-Speed DOM EDC4000 IDE 44Pin Vertical  Disk on Module Hi-Speed DOM EDC4000 IDE 44Pin Vertical Wide Temp  Disk on Module Hi-Speed DOM EDC9000 IDE 44Pin Vertical  Disk on Module Hi-Speed DOM EDC9000 IDE 44Pin Vertical Wide temp  Disk on Module Innolite IDE 44Pin Vertical  Disk on Module Innolite IDE 44Pin Vertical Wide Temp

Looking for pricing? You can get sample price by clicking on the "details" button on each capacity. If you need to get a budgetary price for your project, please contact us

Need technical info or advices? Our mission is to help you finalizing your project successfully. By giving you some advices, we can help you reducing cost and time to market Here is where you can reach us

Need more info ? Ask us! Name:     Email:       Phone:   Question/Inquiry:   Do you want to be contacted by: Phone     e-mail                                       Enter the verification code above into this field: