A PHP Error was encountered
Severity: Warning
Message: A non-numeric value encountered
Filename: ssd/inc_newheader.php
Line Number: 33
background='https://www.memorydepot.com/ssd/images/bigim.jpg' >
 |
|
|
DOM
|
 Disk on Module Cables
All our Disk on Modules are provided with power cable ( if necessary ).
We do offer spare cable or special / customer power cables available here:
|
|
|
1 to 11 targets - Universal Disk on Module (DOM) Duplicator - Interchangeable interface
Versatile Duplicator Solution
Support Sata, mini-Sata (mSata), IDE, CompactFlash, CFAST Interface
We can provide optional adapters to change the interface without having to buy a new duplicator
Standalone unit, no Computer required.
1 to 11 target
|
|
|
1 to 7 targets - SATA Disk on Module (DOM) Duplicator
Standalone, no PC required to operate the duplicator.
Impeccable copy speed: up to 3.9GB per min for each port.
3 copy modes available quick copy, all partitions copy and whole media copy.
Three erase mode available quick erase, full erase and DoD erase.
Supports all types of data format copying while doing bit for bit duplication.
Supports quick copy for Linux (ext2/ext3/ext4) and NTFS, FAT16/32.
|
|
|
Disk on Module - DOM EDC4000 IDE 40Pin Horizontal Type A
Extremely light weight, reliable & performant, This new generation IDE Flash Module made of SLC Industrial Nand Flash Memory, is the most flexible solution to provide reliable storage on space limited and hostile environnment.
Decreasing data access time and replacing any moving part from a traditional hard drive, the Flash Disk on Module fit the needs of a wide range of application.
100% Compatible with the Standard IDE ATA interface, this unit works exaclty like a standard hard drive but without any moving part, strongly increasing reliability and improving data access speed performance, without any noise.
|
|
|
Disk on Module - DOM EDC4000 IDE 40Pin Horizontal Type B
Extremely light weight, reliable & performant, This new generation IDE Flash Module made of SLC Industrial Nand Flash Memory, is the most flexible solution to provide reliable storage on space limited and hostile environnment.
Decreasing data access time and replacing any moving part from a traditional hard drive, the Flash Disk on Module fit the needs of a wide range of application.
100% Compatible with the Standard IDE ATA interface, this unit works exaclty like a standard hard drive but without any moving part, strongly increasing reliability and improving data access speed performance, without any noise.
|
|
|
Disk on Module - DOM EDC4000 IDE 40Pin Horizontal Type C
Extremely light weight, reliable & performant, This new generation IDE Flash Module made of SLC Industrial Nand Flash Memory, is the most flexible solution to provide reliable storage on space limited and hostile environnment.
Decreasing data access time and replacing any moving part from a traditional hard drive, the Flash Disk on Module fit the needs of a wide range of application.
100% Compatible with the Standard IDE ATA interface, this unit works exaclty like a standard hard drive but without any moving part, strongly increasing reliability and improving data access speed performance, without any noise.
|
|
|
Disk on Module - DOM EDC4000 IDE 40Pin Horizontal Type D
Extremely light weight, reliable & performant, This new generation IDE Flash Module made of SLC Industrial Nand Flash Memory, is the most flexible solution to provide reliable storage on space limited and hostile environnment.
Decreasing data access time and replacing any moving part from a traditional hard drive, the Flash Disk on Module fit the needs of a wide range of application.
100% Compatible with the Standard IDE ATA interface, this unit works exaclty like a standard hard drive but without any moving part, strongly increasing reliability and improving data access speed performance, without any noise.
|
|
|
Disk on Module - DOM EDC4000 IDE 40Pin Horizontal Type E
Extremely light weight, reliable & performant, This new generation IDE Flash Module made of SLC Industrial Nand Flash Memory, is the most flexible solution to provide reliable storage on space limited and hostile environnment.
Decreasing data access time and replacing any moving part from a traditional hard drive, the Flash Disk on Module fit the needs of a wide range of application.
100% Compatible with the Standard IDE ATA interface, this unit works exaclty like a standard hard drive but without any moving part, strongly increasing reliability and improving data access speed performance, without any noise.
|
|
|
Disk on Module - DOM EDC4000 IDE 40Pin Horizontal Type F
Extremely light weight, reliable & performant, This new generation IDE Flash Module made of SLC Industrial Nand Flash Memory, is the most flexible solution to provide reliable storage on space limited and hostile environnment.
Decreasing data access time and replacing any moving part from a traditional hard drive, the Flash Disk on Module fit the needs of a wide range of application.
100% Compatible with the Standard IDE ATA interface, this unit works exaclty like a standard hard drive but without any moving part, strongly increasing reliability and improving data access speed performance, without any noise.
|
|
|
Disk on Module DOM IDE SLC 1SE 40 Pin
Innodisk’s vertical EDC 4000 fits into any platform with an IDE connector and provides a simple, fast path upgrade. Designed for industrial embedded applications that require a speedy booting process, the EDC 4000 upgrades the working environment efficiently and enhances data transfer rates with read and write performances of up to 40MB and 20MB per second respectively. The vertical EDC 4000 comes in capacities ranging from 128MB to 16GB and is available in 40-pin and 44-pin vertical connector packages.
Support static wear leveling algorithm
S.M.A.R.T. & i-S.M.A.R.T. Supported
Intelligent system for error recovery
High reliability & compatibility
Mechanical design for anti-vibration
Enhanced power cycling
Benifits
The Innodisk vertical EDC 4000 offers manufacturers a high-capacity solid-state flash memory solution that electrically complies with Personal Computer Memory Card International Association ATA standards.
Compatible with the IDE standard interface and ATA Standard
Supports PIO (0-4), Multiword DMA (0-2), and Ultra DMA (0-4) transfer modes
True IDE access mode
Extremely lightweight and reliable, with a low-profile form factor
|
|
|
Disk on Module Hi-Speed DOM EDC4000 IDE 40Pin Vertical
Extremely light weight, reliable & performant, This new generation IDE Flash Module made of SLC Industrial Nand Flash Memory, is the most flexible solution to provide reliable storage on space limited and hostile environnment.
Decreasing data access time and replacing any moving part from a traditional hard drive, the Flash Disk on Module fit the needs of a wide range of application.
100% Compatible with the Standard IDE ATA interface, this unit works exaclty like a standard hard drive but without any moving part, strongly increasing reliability and improving data access speed performance, without any noise.
What is the difference between "regular" version and [Version2]?
The [Version2] with part# ending with a "B" is simply a new revision of the model with an updated memory chip and firmware update, they have the exact same functionality and specifications. The [version 2] will be available in a longer time range and the "regular" version will phase out sooner. For a new project, we suggest to go with [Version2]
|
|
|
Disk on Module Hi-Speed DOM EDC9000 IDE 40Pin Vertical
The Latest Generation Disk on Module with Outstanding Performance and Durability. Extremely light weight, reliable & performant, This new generation IDE Flash Module is the most flexible solution to provide reliable storage on space limited and hostile environnment.
Decreasing data access time and replacing any moving part from a traditional hard drive, the Flash Disk on Module fit the needs of a wide range of application.
Wide temp version -40c +85c
80MB/s Read 75MB/s Write
Fully support of PIO 0-4/Multiword DMA 0-2/Ultra DMA 0-6 modes
IDE Master/Slave select
Power Cable included
Static Wear-Leveling Function
Bad Block Management & Error-Correction Code
DOS/WinCE/Linux/WinXPe bootable
Available in 2GB to 16GB
100% Compatible with the Standard IDE ATA interface, this unit works exaclty like a standard hard drive but without any moving part, strongly increasing reliability and improving data access speed performance, without any noise.
|
|
|
Disk on Module DOM IDE EDC 1ME 44-Pin Horizontal
|
|
|
|
Disk on Module - DOM EDC4000 IDE 44Pin Horizontal Type A
Extremely light weight, reliable & performant, This new generation IDE Flash Module made of SLC Industrial Nand Flash Memory, is the most flexible solution to provide reliable storage on space limited and hostile environnment.
Decreasing data access time and replacing any moving part from a traditional hard drive, the Flash Disk on Module fit the needs of a wide range of application.
100% Compatible with the Standard IDE ATA interface, this unit works exaclty like a standard hard drive but without any moving part, strongly increasing reliability and improving data access speed performance, without any noise.
|
|
|
Disk on Module - DOM EDC4000 IDE 44Pin Horizontal Type B
Extremely light weight, reliable & performant, This new generation IDE Flash Module made of SLC Industrial Nand Flash Memory, is the most flexible solution to provide reliable storage on space limited and hostile environnment.
Decreasing data access time and replacing any moving part from a traditional hard drive, the Flash Disk on Module fit the needs of a wide range of application.
100% Compatible with the Standard IDE ATA interface, this unit works exaclty like a standard hard drive but without any moving part, strongly increasing reliability and improving data access speed performance, without any noise.
|
|
|
Disk on Module - DOM EDC4000 IDE 44Pin Horizontal Type C
Extremely light weight, reliable & performant, This new generation IDE Flash Module made of SLC Industrial Nand Flash Memory, is the most flexible solution to provide reliable storage on space limited and hostile environnment.
Decreasing data access time and replacing any moving part from a traditional hard drive, the Flash Disk on Module fit the needs of a wide range of application.
100% Compatible with the Standard IDE ATA interface, this unit works exaclty like a standard hard drive but without any moving part, strongly increasing reliability and improving data access speed performance, without any noise.
|
|
|
Disk on Module - DOM EDC4000 IDE 44Pin Horizontal Type D
Extremely light weight, reliable & performant, This new generation IDE Flash Module made of SLC Industrial Nand Flash Memory, is the most flexible solution to provide reliable storage on space limited and hostile environnment.
Decreasing data access time and replacing any moving part from a traditional hard drive, the Flash Disk on Module fit the needs of a wide range of application.
100% Compatible with the Standard IDE ATA interface, this unit works exaclty like a standard hard drive but without any moving part, strongly increasing reliability and improving data access speed performance, without any noise.
|
|
|
Disk on Module - DOM EDC4000 IDE 44Pin Horizontal Type E
Extremely light weight, reliable & performant, This new generation IDE Flash Module made of SLC Industrial Nand Flash Memory, is the most flexible solution to provide reliable storage on space limited and hostile environnment.
Decreasing data access time and replacing any moving part from a traditional hard drive, the Flash Disk on Module fit the needs of a wide range of application.
100% Compatible with the Standard IDE ATA interface, this unit works exaclty like a standard hard drive but without any moving part, strongly increasing reliability and improving data access speed performance, without any noise.
|
|
|
Disk on Module - DOM EDC4000 IDE 44Pin Horizontal Type F
Extremely light weight, reliable & performant, This new generation IDE Flash Module is the most flexible solution to provide reliable storage on space limited and hostile environnment.
Decreasing data access time and replacing any moving part from a traditional hard drive, the Flash Disk on Module fit the needs of a wide range of application.
100% Compatible with the Standard IDE ATA interface, this unit works exaclty like a standard hard drive but without any moving part, strongly increasing reliability and improving data access speed performance, without any noise.
|
|
|
|
Disk on Module DOM IDE EDC 1SE2 44-Pin Horizontal
|
|
|
Disk on Module DOM IDE 1ME 44 Pin
The Innodisk Embedded DISK CARD 1ME (EDC 1ME) products provide high capacity solid-state flash memory that electrically complies with the Personal Computer Memory Card International Association ATA standard. InnoDisk Embedded DISK CARD 1ME (EDC 1ME) is embedded solid-state data storage systems for industrial work place. Embedded DISK CARD 1ME (EDC 1ME) features an extremely light weight, reliable, low-profile form factor.
Embedded DISK CARD 1ME (EDC 1ME) supports advanced PIO (0-6), Multi Word DMA (0-4), Ultra DMA (0-6) transfer modes, multi-sector transfers, and LBA addressing
Features
Industrial 44pin IDE MLC SSD
4GB to 64GB capacities
44pin interface, 3.3V powered
Up to 110MB/sec read, 75MB/sec write
50.3 mm x 27.3 mm x 7.5 mm
0C to +70C or -40C to +85C versions
|
|
|
Disk on Module DOM IDE SLC 1SE 44 Pin
The Innodisk Embedded DISK CARD 1SE (EDC 1SE) products provide high capacity solid-state flash memory that electrically complies with the Personal Computer Memory Card International Association ATA standard. Innodisk Embedded DISK CARD 1SE (EDC 1SE) is embedded solid-state data storage systems for industrial work place. Embedded DISK CARD 1SE (EDC 1SE) features an extremely light weight, reliable, low-profile form factor.
Embedded DISK CARD 1SE (EDC 1SE) supports advanced PIO (0-4), Multi Word DMA (0-2), Ultra DMA (0-4) transfer modes, multi-sector transfers, and LBA addressing
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Write protection security
Enhanced power cycling management
|
|
|
Disk on Module DOM IDE SLC 1SE2 44 Pin
|
|
|
|
Disk on Module Hi-Speed DOM EDC4000 IDE 44Pin Vertical
Extremely light weight, reliable & performant, This new generation IDE Flash Module made of SLC Industrial Nand Flash Memory, is the most flexible solution to provide reliable storage on space limited and hostile environnment.
Decreasing data access time and replacing any moving part from a traditional hard drive, the Flash Disk on Module fit the needs of a wide range of application.
100% Compatible with the Standard IDE ATA interface, this unit works exaclty like a standard hard drive but without any moving part, strongly increasing reliability and improving data access speed performance, without any noise.
What is the difference between "regular" version and [Version2]?
The [Version2] with part# ending with a "B" is simply a new revision of the model with an updated memory chip and firmware update, they have the exact same functionality and specifications. The [version 2] will be available in a longer time range and the "regular" version will phase out sooner. For a new project, we suggest to go with [Version2]
|
|
|
Disk on Module Hi-Speed DOM EDC9000 IDE 44Pin Vertical
The Latest Generation Disk on Module with Outstanding Performance and Durability. Extremely light weight, reliable & performant, This new generation IDE Flash Module is the most flexible solution to provide reliable storage on space limited and hostile environnment.
Decreasing data access time and replacing any moving part from a traditional hard drive, the Flash Disk on Module fit the needs of a wide range of application.
Wide temp version -40c +85c
80MB/s Read 75MB/s Write
Fully support of PIO 0-4/Multiword DMA 0-2/Ultra DMA 0-6 modes
IDE Master/Slave select
Power Cable included
Static Wear-Leveling Function
Bad Block Management & Error-Correction Code
DOS/WinCE/Linux/WinXPe bootable
Available in 2GB to 16GB
100% Compatible with the Standard IDE ATA interface, this unit works exaclty like a standard hard drive but without any moving part, strongly increasing reliability and improving data access speed performance, without any noise.
|
|
|
M.2 (S42) 3IE3
Product Features
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Anti-vibration mechanical design
|
|
3IE4.JPG)
|
M.2 (S42) 3IE4
Product Features
SATA III solution for industrial field
Exclusive L³ architecture
Designed with hardware LDPC ECC engine
Suppored iData Guard protection
DRAM-less, 100% data integrity
Excellent random performance
Supported TRIM/NCQ/SMART
|
|
|
|
M.2 (S42) 3IE5
Product Features
SATA III solution for industrial field
Exclusive L³ architecture
Designed with hardware LDPC ECC engine
Suppored iData Guard protection
DRAM-less, 100% data integrity
Excellent random performance
Supported TRIM/NCQ/SMART
|
|
|
|
M.2 (S80) 3IE4
|
|
|
|
M.2 (S80) 3IE5
|
|
|
|
M.2 (S42) 3IE2-P
|
|
|
|
M.2 (S42) 3IE3
|
|
|
|
M.2 (S80) 3IE2-P
|
|
|
|
M.2 (S80) 3IE3
|
|
|
M.2 (S42) 3ME3
Product Features
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Anti-vibration mechanical design
|
|
|
M.2 (S42) 3ME4
Product Features
SATA III soultion for industrial field
Exclusive L³ architecture
DRAM-less, 100% data integrity
Excellent random performance
Supports TRIM/NCQ/SMART
Built in iData Guard
Compatible with M.2 2242-D2-B-M standard
Designed with hardware LDPC ECC engine
|
|
|
M.2 (S60) 3ME3
Product Features
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Anti-vibration mechanical design
|
|
|
M.2 (S42) 3ME2
Product Features
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Anti-vibration mechanical design
|
|
|
|
M.2 (S80) 3ME4
|
|
|
M.2 (S80) 3MG2-P
Product Features
SATA III solution for industrial field
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Anti-vibration mechanical design
|
|
|
M.2 3ME
Innodisk M.2 (S42) 3ME is designed as the standard M.2 form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers to the M.2(NGFF) specification which established by JEDEC. Regarding of mechanical interference, Innodisk M.2 (S42) 3ME absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk M.2 (S42) 3ME effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Write protection security
Zero mechanical interference
Anti-vibration mechanical design
|
|
|
|
M.2 3ME2
|
|
|
M.2 3ME3
| Innodisk M.2 (S42) 3ME is designed as the standard M.2 form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers to the M.2(NGFF) specification which established by JEDEC. Regarding of mechanical interference, Innodisk M.2 (S42) 3ME absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier. |
Innodisk M.2 (S42) 3ME effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device. |
Features |
| SATA 6Gb/s interface |
| iSMART disk health monitoring |
| Intelligent error recovery system |
| Excellent data transfer speed |
| Write protection security |
| Zero mechanical interference |
| Anti-vibration mechanical design |
|
|
|
M.2 3MG2-P
Innodisk M.2 (S80) 3MG2-P is designed as the standard M.2 form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers to the M.2(NGFF) specification which established by JEDEC. Regarding of mechanical interference, Innodisk M.2 (S80) 3MG2-P absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk M.2 (S80) 3MG2-P effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device
Features
SATA III solution for industrial field
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Write protection security
Zero mechanical interference
Anti-vibration mechanical design
|
|
|
M.2 (S42) 3SE SLC
Innodisk M.2 (S42) 3SE is designed as the standard M.2 form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers to the M.2(NGFF) specification which established by JEDEC. Regarding of mechanical interference, Innodisk M.2 (S42) 3SE absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk M.2 (S42) 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Anti-vibration mechanical design
|
|
|
M.2 (S42) 3SE2
Product Features
SATA III soultion for industrial field
Innovative Firmware Algorithm
DRAM-less, 100% data integrity
Excellent random performance
Wide Temperature: -40?~85 ?
Supports TRIM/NCQ/SMART
Built in iData Guard
iSMART disk health monitoring
Compatible with M.2 2242-D1-B-M
|
|
|
|
M.2 (S42) 3SE3
Product Features
SATA III soultion for industrial field
Innovative Firmware Algorithm
DRAM-less, 100% data integrity
Excellent random performance
Wide Temperature: -40?~85 ?
Supports TRIM/NCQ/SMART
Built in iData Guard
iSMART disk health monitoring
Compatible with M.2 2242-D1-B-M
|
|
|
|
M.2 (S80) 3SE3
|
|
|
Mini PCIeDOM 1IE3
Product Features
Enhanced endurance with iSLC
Standard Mini PCIe form factor
Driverless
iSMART disk health monitoring
Intelligent error recovery system
Optional write protection security
Anti-vibration mechanical design
|
|
|
Mini PCIeDOM 1ME3
Product Features
Standard Mini PCIe form factor
Driverless
iSMART disk health monitoring
Intelligent error recovery system
Optional write protection security
Anti-vibration mechanical design
|
|
|
MiniDOM-U 2ME
The Innodisk MiniDOM-U product provides high capacity Mini PCIe memory storage with USB interface, which electrically complies with High-speed USB 2.0 interface & backward compatible with USB 1.1. The device features attractive small form factor and the connectivity with USB 2.0 interface and the NAND flash architecture provides a faster data transmission.
Cost-effective MLC
Work on mini PCIe interface with USB signal
Wear-leveling supported
Low power consumption
|
|
|
MiniPCIe DOM 1ME3
Innodisk Mini PCIeDOM 1ME is a Flash based disk module with Mini PCI Express interface, which brings you new generation of storage solution, especially focused on embedded systems. It not only provide standard Mini PCIe interface but also delivers excellent performance.
Comparing with most Mini PCIe storage devices in the market, Mini PCIeDOM 1ME comes
with standard Mini PCI Express interface, just plug and play without any circuit modification, and no driver needed, which is the easiest way for board maker or system integrator to
design in the product as a boot drive or storage device.
Features:
Standard Mini PCIe form factor
Driverless
iSMART disk health monitoring
Intelligent error recovery system
Optional write protection security
Anti-vibration mechanical design
|
|
|
Mini PCIe Disk on Module (PCIe 1.1 compatible)
The Mini PCIe Disk on Module (mini DOM) series supports SATA II standard
(3.0Gb/s) and USB 2.0 interface with good performance and thus performs faster data
transfer rate. Sustain read can reach up to 100MB per second (max), and sustain
write reach up to 60MB per second (max). Moreover, InnoDisk mini DOM is designed
as the standard Mini PCIe form factor, and compatible with Mini PCIe slot
|
|
|
Mini PCIe Disk on Module (SATA & USB 2.0 compatible)
PCI Express has been adopted as a mainstream interface of storage, which dramatically
increases data transfer bandwidth and application performance; Besides, Mini PCI Express
also been applied in most of IPC system.
InnoDisk Mini PCIeDOM is a revolutionary innovation of disk on module with Mini PCIe
Express interface, which brings you new generation of storage solution, especially focused
on embedded systems.
Comparing with most Mini PCIe storage devices in the market, Mini PCIeDOM comes with
standard Mini PCI Express pin definition, for board maker or system integrator is the easiest
way to design in this product without any circuit modification.
|
|
|
Mini PCIe Disk on Module (USB 2.0 Compatible)
PCI Express has been adopted as a mainstream interface of storage, which
dramatically increases data transfer bandwidth and application performance;
Besides, Mini PCI Express
also been applied in most of IPC system. InnoDisk Mini PCIeDOM is a
revolutionary innovation of disk on module with Mini PCIe Express interface,
which brings you new generation of storage solution, especially focused on
embedded systems. Comparing with most Mini PCIe storage devices in the market,
Mini PCIeDOM comes with
standard Mini PCI Express pin definition, for board maker or system integrator
is the easiest way to design in this product without any circuit modification.
|
|
|
Mini PCIeDOM 1SE, SLC
The InnoDisk Mini PCIeDOM 1SE (SLC) is a flash based disk module with Mini PCI Express interface, which brings you new generation of storage solution, especially focused on embedded systems. It not only provide standard Mini PCIe interface but also delivers excellent performance.
Comparing with most Mini PCIe storage devices in the market, Mini PCIe DOM 1SE comes with standard PCI Express interface, just plug and play without any circuit modification, and no driver needed, which is the easiest way for board maker or system integrator to design in the product as a boot drive or storage device.
Features
Standard Mini PCIe form factor
Driverless
iSMART disk health monitoring
Intelligent error recovery system
Optional write protection security
Anti-vibration mechanical design
|
|
|
MinoDOM-U 2SE SLC
The Innodisk MiniDOM-U product provides high capacity Mini PCIe
memory storage with USB interface, which electrically complies with Highspeed
USB 2.0 interface & backward compatible with USB 1.1. The device
features attractive small form factor and the connectivity with USB 2.0
interface and the NAND flash architecture provides a faster data
transmission.
|
|
|
PCIe Disk on Module
The PCIe DOM is a totally revolutionary embedded flash storage. It is developed within amazing data transfer speed and also extremely small mechanical design. PCIeDOM has a height of 2 cm, which avoids mechanical interference with easy installment on the flat mother board. Different from the connection with a tailgate of the system for installation, PCIeDOMTMs patented mechanical design lets users to enjoy simple installment and detachment without other tools, just plug and play.
Besides, PCIeDOM provides excellent random read/write performance and support intelligent wear-leveling algorithm to assure the reliability of the device.
Smallest PCIe Disk on Module
Compliant with PCIe x1, and compatible with PCIe x4, x8, x16
Excellent IOPS
Built-in ECC function
Support wear-leveling algorithm
Patented mechanical design-plug and play: anti-shock and anti-vibration
Flexibility for server mother board design (without tailgate)
|
|
|
PCIe G1 SSD 910MB/s Matador
InnoDisk Matador II products provide high capacity flash memory Solid State Drive (SSD)
that electrically complies with PCIe G1standard interface.
InnoDisk Matador II supports PCIe G1 (2.5G/lan) with high performance. For SLC solution, sustain read is at 910 MB per
second (max.), and sustain write is at 750 MB per second (max).
InnoDisk Matador II uses
standard PCIe G1 X8 interface with the PCIe full height form factor, which can be used in
laptop. The Matador II has good performance, short latency time and small seek time.
It
effectively reduces the transfer time of large stream data and the power consumption is less
than he Raid system with hard Disk Drive. InnoDisk Matador II can be installed easily by
including a device driver for OS. InnoDisk Matador II complies with ATA protocol, and the
Matador II SSD can be configured as a boot device or data storage device.Available in
64GB to 512GB
Features:
Support maximum 16CEs Flash per channel.
Support 5x/4x/3x nm Flash.
Enhanced endurance by dynamic/static wear-leveling.
Supports 4K/8K bytes page size.
Supports dynamic power management.
SMART (Self-Monitoring, Analysis and Reporting Technology).
Data integrity under power-cycling.
Supports 8 bits Flash interface.
Supports BCH 16/24 bits ECC.
Support NCQ on this controller.
Support LBA24 & LBA48 on this controller.
Support 1 to 8 banks selected free.
Support 2 to 8 channels selected free.
|
|
|
Disk on Module SATA SATADOM MV 3IE - Built-in Power Pin 7
Innodisk SATADOM-MV 3IE is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. Regarding of mechanical interference, InnoDisk SATADOM-MV 3ME absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk SATADOM-MV 3IE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Write protection security
Zero mechanical interference
Anti-vibration mechanical desig
|
|
|
Disk on Module SATA SATADOM QV 2IE iSLC
Qualified by Intel, Innodisk's SATADOM-QV 2IE is the world's smallest SATA SSD, featuring built-in Pin 7 VCC technology that enhances the functionality of various embedded applications. With its cable-less and rugged design, the QH 2IE provides high reliability and allows for easy integration with other systems. In addition, our proprietary iSLC technology ensures that the SATADOM-QV 2IE lasts for up to 30,000 operations, with a lifespan 10 times longer than that of MLC-based SSDs.
|
|
|
Disk on Module SATA SATADOM QVL 2IE iSLC
Qualified by Intel, Innodisk's SATADOM-QV 2IE is the worlds smallest SATA SSD, featuring built-in Pin 7 VCC technology that enhances the functionality of various embedded applications. With its cable-less and rugged design, the QH 2IE provides high reliability and allows for easy integration with other systems. In addition, our proprietary iSLC technology ensures that the SATADOM-QV 2IE lasts for up to 30,000 operations, with a lifespan 10 times longer than that of MLC-based SSDs.
|
|
|
SATADOM-MH 3IE iSLC
Innodisk Serial ATA Disk on Module (SATADOM) supports SATA III standard (6.0Gb/s) interface with excellent performance, and SATADOM-MH 3ME is designed as the smallest form factor size that could enhance compatibility with various design applications. Particularly the 7th pin of standard SATA 7pin connector can optionally be the built-in power VCC pin.
Innodisk SATADOM-MH 3ME effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
Features:
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Anti-vibration mechanical design
Built-in Pin7 VCC
|
|
|
SATADOM-ML 3IS4
Product Features
SATA III solution for Server Boot-Up Drive
Exclusive L³ architecture
DRAM-less, 100% data integrity
Excellent random performance
Designed with hardware LDPC ECC engine
Cost-effective Flash with iSLC
Cable-less through Pin 7/Pin 8 connectors
Hardware write protection supported
High less than 1U
|
|
|
SATADOM-MV 3IE iSLC
Innodisk SATADOM-MV 3IE is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. Regarding of mechanical interference, InnoDisk SATADOM-MV 3ME absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk SATADOM-MV 3IE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Write protection security
Zero mechanical interference
Anti-vibration mechanical desig
|
|
|
SATADOM-SH 3IE3 V2
Product Features
iSLC technology
Built-in Pin 8 power supply
Best boot drive solution for server and embedded system
SATA 6Gb/s interface
High IOPS to reduce boot up timing
DRAM-less, 100% data integrity
Innovative Firmware Algorithm
Anti-vibration mechanical design
Built in iData Guard
|
|
|
SATADOM-SL 3IE3 V2
Product Features
iSLC technology
Built-in Pin 8 power supply
Best boot drive solution for server and embedded system
SATA 6Gb/s interface
High IOPS to reduce boot up timing
DRAM-less, 100% data integrity
Innovative Firmware Algorithm
Anti-vibration mechanical design
Built in iData Guard
|
|
|
SATADOM-SL 3IE4
Product Features
SATA III soultion for industrial field
Exclusive L³ architecture
DRAM-less, 100% data integrity
Excellent random performance
Designed with hardware LDPC ECC engine
Built-in Pin 8 power supply
|
|
|
SATADOM-SV 3IE3 V2
Product Features
iSLC technology
Built-in Pin 8 power supply
Best boot drive solution for server and embedded system
SATA 6Gb/s interface
High IOPS to reduce boot up timing
DRAM-less, 100% data integrity
Innovative Firmware Algorithm
Anti-vibration mechanical design
Built in iData Guard
|
|
|
SATADOM-SV 3IE4
Product Features
SATA III soultion for industrial field
Exclusive L³ architecture
DRAM-less, 100% data integrity
Excellent random performance
Designed with hardware LDPC ECC engine
Built-in Pin 8 power supply
|
|
|
SERVERDOM-3IE
|
|
|
|
ServerDOM-H 3IE3
Product Features
Bootable and compatible with all OS
Better reliability and MTBF than HDD
Small dimension for Blade or 1U servers
Compatible with Intel® RSTe
Cost effective storage solution
SATA Pin 8 VCC to enhance reliability and save space
Customizable for IPMI
Unexpected power loss protection
|
|
|
ServerDOM-L 3IE3
Product Features
Bootable and compatible with all OS
Better reliability and MTBF than HDD
Small dimension for Blade or 1U servers
Compatible with Intel® RSTe
Cost effective storage solution
SATA Pin 8 VCC to enhance reliability and save space
Customizable for IPMI
Unexpected power loss protection
|
|
|
ServerDOM-V 3IE3
Product Features
Bootable and compatible with all OS
Better reliability and MTBF than HDD
Small dimension for Blade or 1U servers
Compatible with Intel® RSTe
Cost effective storage solution
SATA Pin 8 VCC to enhance reliability and save space
Customizable for IPMI
Unexpected power loss protection
|
|
|
SATA Slim 3ME3
Innodisk SATA Slim 3ME3 is SATA III 6Gb/s Flash based disk, which designed with standard SATA interface (7+15 SATA connector), and compliant with JEDEC MO-297 standard. With its smaller dimension, SATA Slim 3ME3 is an alternative solution of 2.5” SSD for those embedded system that may have mechanical and space concerns. Innodisk SATA Slim 3ME3 operates under SATA III (6.0Gb/s) interface with excellent performance and reliability making it the ideal solution for a variety of applications, including embedded system, and industrial field.
Features
SATA III soultion for industrial field
Innovative Firmware Algorithm
DRAM-less, 100% data integrity
Excellent random performance
Wide Temperature: -40?~85 ?
Supports TRIM/NCQ/SMART
Built in iData Guard
iSMART disk health monitoring
Compatible with JEDEC MO-297 standard
|
|
|
|
SATADOM-MH 3ME
Innodisk Serial ATA Disk on Module (SATADOM) supports SATA III standard (6.0Gb/s) interface with excellent performance, and SATADOM-MH 3ME is designed as the smallest form factor size that could enhance compatibility with various design applications. Particularly the 7th pin of standard SATA 7pin connector can optionally be the built-in power VCC pin.
Innodisk SATADOM-MH 3ME effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
Features:
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Anti-vibration mechanical design
Built-in Pin7 VCC
|
|
|
SATADOM-MH 3ME3
Innodisk Serial ATA Disk on Module (SATADOM) supports SATA III standard (6.0Gb/s) interface with excellent performance, and SATADOM-MH 3ME3 is designed as the smallest form factor size that could enhance compatibility with various design applications. Particularly the 7th pin of standard SATA 7pin connector can optionally be the built-in power VCC pin.
Innodisk SATADOM-MH 3ME3 effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
Features
Best boot drive solution for server and embedded system
SATA 6Gb/s interface
High IOPS to reduce boot up timing
Built-in Pin 7 power supply
Intelligent error recovery system
Zero mechanical interference
Anti-vibration mechanical design
iSMART disk health monitoring
|
|
|
SATADOM-MH 3ME4
Product Features
SATA III solution for industrial field
Exclusive L³ architecture
DRAM-less, 100% data integrity
Excellent random performance
Designed with hardware LDPC ECC engine
Built-in Pin 8 power supply
Hardware write protection supported
|
|
|
SATADOM-ML
Product Features
SATA III solution for industrial field
Exclusive L³ architecture
DRAM-less, 100% data integrity
Excellent random performance
Designed with hardware LDPC ECC engine
Built-in Pin 8 power supply
Hardware write protection supported
|
|
|
SATADOM-ML 3ME
Innodisk SATADOM-ML 3ME is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. Regarding of mechanical interference, Innodisk SATADOM-ML 3ME absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk SATADOM-ML 3ME effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
Features:
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Write protection security
Zero mechanical interference
Anti-vibration mechanical design
|
|
|
SATADOM-ML 3ME3
Innodisk Serial ATA Disk on Module (SATADOM) supports SATA III standard (6.0Gb/s) interface with excellent performance, and SATADOM-ML 3ME3 is designed as the smallest form factor size that could enhance compatibility with various design applications. Particularly the 7th pin of standard SATA 7pin connector can optionally be the built-in power VCC pin.
Innodisk SATADOM-ML 3ME3 effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
Features
Best boot drive solution for server and embedded system
SATA 6Gb/s interface
High IOPS to reduce boot up timing
Built-in Pin 7 power supply
Intelligent error recovery system
Zero mechanical interference
Anti-vibration mechanical design
iSMART disk health monitoring
|
|
|
SATADOM-ML 3MG-P
Innodisk SATADOM-ML 3MG-P is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. Regarding of mechanical interference, Innodisk SATADOM-ML 3MG-P absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk SATADOM-ML 3MG-P effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
Features:
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Write protection security
Zero mechanical interference
Anti-vibration mechanical design
|
|
|
SATADOM-ML 3MG2-P
Product Features
Built-in Pin 8 power supply
Best boot drive solution for server and embedded system
SATA 6Gb/s interface
High IOPS to reduce boot up timing
Innovative Firmware Algorithm
Anti-vibration mechanical design
Built in iData Guard
Hardware write protection supported
|
|
|
SATADOM-ML 3MS4
Product Features
SATA III solution for Server Boot-Up Drive
Exclusive L³ architecture
DRAM-less, 100% data integrity
Excellent random performance
Designed with hardware LDPC ECC engine
Cable-less through Pin 7/Pin 8 connectors
Hardware write protection supported
High less than 1U
|
|
|
SATADOM-MV 3ME
Innodisk SATADOM-MV 3ME is designed as the standard Mini PCIe form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. Regarding of mechanical interference, InnoDisk SATADOM-MV 3ME absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk SATADOM-MV 3ME effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Write protection security
Zero mechanical interference
Anti-vibration mechanical design
|
|
|
SATADOM-MV 3ME with Pin7 VCC Supported
Innodisk SATADOM-MV 3ME is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. Regarding of mechanical interference, InnoDisk SATADOM-MV 3ME absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk SATADOM-MV 3ME effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
Features:
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Write protection security
Zero mechanical interference
Anti-vibration mechanical design
|
|
|
SATADOM-MV 3ME3
Innodisk SATADOM-MV 3ME3 is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. Innodisk SATADOM-MV 3ME3 absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk SATADOM-MV 3ME3 effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
Features
Best boot drive solution for server and embedded system
SATA 6Gb/s interface
High IOPS to reduce boot up timing
Built-in Pin 7 power supply
DRAM-less, 100% data integrity
Innovative Firmware Algorithm
Anti-vibration mechanical design
Built in iData Guard
|
|
|
SATADOM-MV 3ME4
Product Features
SATA III solution for industrial field
Exclusive L³ architecture
DRAM-less, 100% data integrity
Excellent random performance
Designed with hardware LDPC ECC engine
Built-in Pin 8 power supply
Hardware write protection supported
|
|
|
SATADOM-SH 3ME
Innodisk SATADOM-SH 3ME is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance., Innodisk SATADOM-SH 3ME absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk SATADOM-SH 3ME effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
Features:
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Anti-vibration mechanical design
|
|
|
|
SATADOM-SH 3ME with Pin7 VCC Supported
Innodisk SATADOM-SH 3ME is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance., Innodisk SATADOM-SH 3ME absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk SATADOM-SH 3ME effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
Features:
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Anti-vibration mechanical design
|
|
|
SATADOM-SH 3ME3
Innodisk SATADOM™-SH 3ME3 is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. Innodisk SATADOM™-SH 3ME3 absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk SATADOM™-SH 3ME3 effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
Features
Best boot drive solution for server and embedded system
SATA 6Gb/s interface
High IOPS to reduce boot up timing
Built-in Pin 7 power supply
DRAM-less, 100% data integrity
Innovative Firmware Algorithm
Anti-vibration mechanical design
Built in iData Guard
|
|
|
SATADOM-SH 3ME4
Product Features
SATA III solution for industrial field
Exclusive L³ architecture
DRAM-less, 100% data integrity
Excellent random performance
Designed with hardware LDPC ECC engine
Built-in Pin 8 power supply
|
|
|
SATADOM-SH TYPE C
Product Features
SATA III solution for industrial field
Exclusive L³ architecture
DRAM-less, 100% data integrity
Excellent random performance
Designed with hardware LDPC ECC engine
Built-in Pin 8 power supply
|
|
|
SATADOM-SH Type C 3ME
Innodisk SATADOM-SH Type C 3ME is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. It has opposite angle compare to SATADOM-SH, and able to fulfill different motherboard (SATA port) design.
Innodisk SATADOM-SH Type C 3ME effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
Features
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Anti-vibration mechanical design
|
|
|
SATADOM-SH Type C 3ME3
Innodisk SATADOM-SH Type C 3ME is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. It has opposite angle compare to SATADOM-SH, and able to fulfill different motherboard (SATA port) design.
Innodisk SATADOM-SH Type C 3ME effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
Features
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Anti-vibration mechanical design
|
|
|
SATADOM-SH TYPE D
Product Features
SATA III solution for industrial field
Exclusive L³ architecture
DRAM-less, 100% data integrity
Excellent random performance
Designed with hardware LDPC ECC engine
Built-in Pin 8 power supply
|
|
|
SATADOM-SH Type D 3ME
Innodisk SATADOM-SH 3ME is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance., Innodisk SATADOM-SH 3ME absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk SATADOM-SH 3ME effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
Features:
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Anti-vibration mechanical design
|
|
|
|
SATADOM-SH Type D 3ME2
|
|
|
SATADOM-SH Type D 3ME3
Innodisk SATADOM-SH Type D 3ME3 is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. Innodisk SATADOM-SH Type D 3ME3 absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk SATADOM-SH Type D 3ME3 effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
Features
Best boot drive solution for server and embedded system
SATA 6Gb/s interface
High IOPS to reduce boot up timing
Built-in Pin 7 power supply
DRAM-less, 100% data integrity
Innovative Firmware Algorithm
Anti-vibration mechanical design
Built in iData Guard
|
|
|
SATADOM-SL 3ME
Innodisk SATADOM-SL 3ME is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance, Innodisk SATADOM-SL 3ME absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk SATADOM-SL 3ME effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Anti-vibration mechanical design
|
|
|
|
SATADOM-SL 3ME2
Innodisk Serial ATA Disk on Module (SATADOM) supports SATA III standard (6.0Gb/s) interface with excellent performance, and SATADOM-SL 3ME V2 is designed as the smallest form factor size that could enhance compatibility with various design applications.
The innovative Pin8 uses the SATA connector itself as a power supply to drive the device without external cables. It could be connected directly to the SATA on-board socket on customers’ system without additional power cable. Besides, the booting time for operation and the power consumption is less than hard disk drive (HDD), and can work under harsh environment compile with ATA protocol, no additional drives are required, and the SSD can be configured as a boot device or data storage device.
Features
Built-in Pin 8 power supply
Best boot drive solution for server and embedded system
SATA 6Gb/s interface
High IOPS to reduce boot up timing
DRAM-less, 100% data integrity
Innovative Firmware Algorithm
Anti-vibration mechanical design
Built in iData Guard
|
|
|
SATADOM-SL 3ME3
Innodisk SATADOM-SL 3ME3 is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. Innodisk SATADOM-SL 3ME3 absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk SATADOM-SL 3ME3 effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
Features
Best boot drive solution for server and embedded system
SATA 6Gb/s interface
High IOPS to reduce boot up timing
Built-in Pin 7 power supply
DRAM-less, 100% data integrity
Innovative Firmware Algorithm
Anti-vibration mechanical design
Built in iData Guard
|
|
|
SATADOM-SL 3ME4
Product Features
SATA III solution for industrial field
Exclusive L³ architecture
DRAM-less, 100% data integrity
Excellent random performance
Designed with hardware LDPC ECC engine
Built-in Pin 8 power supply
|
|
|
SATADOM-SV 3ME
Innodisk SATADOM-SV 3SE Wide Temp is designed as the standard Mini PCIe form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance., InnoDisk SATADOM-SV 3SE absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk SATADOM-SV 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Anti-vibration mechanical design
|
|
|
SATADOM-SV 3ME3
Innodisk SATADOM-SV 3ME3 is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. Innodisk SATADOM-SV 3ME3 absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk SATADOM-SV 3ME3 effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
Features
Best boot drive solution for server and embedded system
SATA 6Gb/s interface
High IOPS to reduce boot up timing
Built-in Pin 7 power supply
DRAM-less, 100% data integrity
Innovative Firmware Algorithm
Anti-vibration mechanical design
Built in iData Guard
|
|
|
SATADOM-SV 3ME4
Product Features
SATA III solution for industrial field
Exclusive L³ architecture
DRAM-less, 100% data integrity
Excellent random performance
Designed with hardware LDPC ECC engine
Built-in Pin 8 power supply
|
|
|
|
ServerDom 3ME
Innodisk ServerDOM is dedicated to the further of server design. By using ServerDOM as a boot drive, there is more space for the hot-swappable data storage devices. Innodisk ServerDOM is designed with SATA III interface and complaint with server grade stranded, such as supporting for Intel RSTe. Furthermore, with our excellent development team, we are able to provide customized services to fulfill different inquires; H/W design or software integration, such as IPMI.
Bootable and compatible with all OS
Better reliability and MTBF than HDD
Small dimension for Blade or 1U servers
Compatible with Intel RSTe
Cost effective storage solution
Optional SATA Pin 7 VCC to enhance reliability and save space
Customizable for IPMI
Unexpected power loss protection
|
|
|
ServerDOM-H 3ME3
Product Features
Bootable and compatible with all OS
Better reliability and MTBF than HDD
Small dimension for Blade or 1U servers
Compatible with Intel® RSTe
Cost effective storage solution
SATA Pin 8 VCC to enhance reliability and save space
Customizable for IPMI
Unexpected power loss protection
|
|
|
ServerDOM-L 3ME3
Product Features
Bootable and compatible with all OS
Better reliability and MTBF than HDD
Small dimension for Blade or 1U servers
Compatible with Intel® RSTe
Cost effective storage solution
SATA Pin 8 VCC to enhance reliability and save space
Customizable for IPMI
Unexpected power loss protection
|
|
|
ServerDOM-V 3ME3
Product Features
Bootable and compatible with all OS
Better reliability and MTBF than HDD
Small dimension for Blade or 1U servers
Compatible with Intel® RSTe
Cost effective storage solution
Customizable for IPMI
Unexpected power loss protection
|
|
|
SATADOM-MH 3SE Industrial Disk on Module
Innodisk Serial ATA Disk on Module (SATADOM) supports SATA III standard (6.0Gb/s) interface with excellent performance, and SATADOM-MH 3SE is designed as the smallest form factor size that could enhance compatibility with various design applications. Particularly the 7th pin of standard SATA 7pin connector can optionally be the built-in power VCC pin.
Innodisk SATADOM-MH 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Anti-vibration mechanical design
Built-in Pin7 VCC
|
|
|
SATADOM-ML 3SE
Innodisk SATADOM-ML 3SE is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. Regarding of mechanical interference, Innodisk SATADOM-ML 3SE absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk SATADOM-ML 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Write protection security
Zero mechanical interference
Anti-vibration mechanical design
|
|
|
SATADOM-ML 3SE Industrial Disk on Module SLC
Innodisk SATADOM-ML 3SE is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. Regarding of mechanical interference, Innodisk SATADOM-ML 3SE absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk SATADOM-ML 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Write protection security
Zero mechanical interference
Anti-vibration mechanical design
|
|
|
|
SATADOM-ML 3SE-P Industrial Disk on Module High IOPS
Innodisk SATADOM-ML 3SE is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. Regarding of mechanical interference, Innodisk SATADOM-ML 3SE absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk SATADOM-ML 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Write protection security
Zero mechanical interference
Anti-vibration mechanical design
|
|
|
SATADOM-ML 3SE3
Product Features
Best boot drive solution for server and embedded system
SATA III interface
High IOPS to reduce boot up timing
Built-in Pin 8 power supply
Intelligent error recovery system
Zero mechanical interference
Anti-vibration mechanical design
iSMART disk health monitoring
|
|
|
|
SATADOM-MV 3SE
Innodisk SATADOM-MV 3SE is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. Regarding of mechanical interference, Innodisk SATADOM-MV 3SE absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk SATADOM-MV 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
Features
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Write protection security
Zero mechanical interference
Anti-vibration mechanical design
|
|
|
SATADOM-MV 3SE Industrial Disk on Module SLC
Innodisk SATADOM-MV 3SE is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. Regarding of mechanical interference, Innodisk SATADOM-MV 3SE absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk SATADOM-MV 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
Features
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Write protection security
Zero mechanical interference
Anti-vibration mechanical design
|
|
|
SATADOM-SH 3SE Industrial Disk on Module SLC
Innodisk SATADOM-SH 3SE is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance., Innodisk SATADOM-SH 3SE absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk SATADOM-SH 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
|
|
|
SATADOM-SH 3SE3
Product Features
Best boot drive solution for server and embedded system
SATA III interface
High IOPS to reduce boot up timing
Built-in Pin 8 power supply
Intelligent error recovery system
Zero mechanical interference
Anti-vibration mechanical design
iSMART disk health monitoring
|
|
|
SATADOM-SH 3SE3 Type C
Product Features
Best boot drive solution for server and embedded system
SATA 6Gb/s interface
High IOPS to reduce boot up timing
Built-in Pin 8 power supply
Intelligent error recovery system
Zero mechanical interference
Anti-vibration mechanical design
iSMART disk health monitoring
|
|
|
SATADOM-SH TYPE C Industrial Disk on Module 3SE
Innodisk SATADOM-SH Type C 3SE is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. It has opposite angle compare to SATADOM-SH, and able to fulfill different motherboard (SATA port) design.
Innodisk SATADOM-SH Type C 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
Features
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Anti-vibration mechanical design
|
|
|
SATADOM-SH TYPE D 3SE3
Product Features
Best boot drive solution for server and embedded system
SATA 6Gb/s interface
High IOPS to reduce boot up timing
Built-in Pin 7 power supply
Intelligent error recovery system
Zero mechanical interference
Anti-vibration mechanical design
iSMART disk health monitoring
|
|
|
SATADOM-SH TYPE D Industrial Disk on Module 3SE SLC
Innodisk SATADOM-SH 3SE is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance., Innodisk SATADOM-SH 3SE absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk SATADOM-SH 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
Features:
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Anti-vibration mechanical design
|
|
|
SATADOM-SL 3SE Industrial Disk on Module SLC
Innodisk SATADOM-SL 3SE is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance, Innodisk SATADOM-SL 3SE absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk SATADOM-SL 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
Features:
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Anti-vibration mechanical design
|
|
|
SATADOM-SL 3SE3
Product Features
Best boot drive solution for server and embedded system
SATA III interface
High IOPS to reduce boot up timing
Built-in Pin 8 power supply
Intelligent error recovery system
Zero mechanical interference
Anti-vibration mechanical design
iSMART disk health monitoring
|
|
|
SATADOM-SV 3SE Industrial Disk on Module SLC
Innodisk SATADOM-SV 3SE is designed as the standard Mini PCIe form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance., InnoDisk SATADOM-SV 3SE absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk SATADOM-SV 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
SATA 6Gb/s interface
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Anti-vibration mechanical design
|
|
|
SATADOM-SV 3SE3
Product Features
Best boot drive solution for server and embedded system
SATA III interface
High IOPS to reduce boot up timing
Built-in Pin 8 power supply
Intelligent error recovery system
Zero mechanical interference
Anti-vibration mechanical design
iSMART disk health monitoring
|
|
|
ServerDOM-H 3SE
Innodisk ServerDOM is dedicated to the further of server design. By using ServerDOM as a boot drive, there is more space for the hot-swappable data storage devices. Innodisk ServerDOM is designed with SATA III interface and complaint with server grade stranded, such as supporting for Intel RSTe. Furthermore, with our excellent development team, we are able to provide customized services to fulfill different inquires; H/W design or software integration, such as IPMI.
Bootable and compatible with all OS
Better reliability and MTBF than HDD
Small dimension for Blade or 1U servers
Compatible with Intel RSTe
Cost effective storage solution
|
|
|
ServerDOM-L 3SE
Innodisk ServerDOM™ is dedicated to the further of server design. By using ServerDOM™ as a boot drive, there is more space for the hot-swappable data storage devices. Innodisk ServerDOM™ is designed with SATA III interface and patent Pin8 SATA connector for cable-less power supply feature, ServerDOM™ complaint with server grade stranded, such as supporting for Intel® RSTe. Furthermore, with our excellent development team, we are able to provide customized services to fulfill different inquires; H/W design or software integration, such as IPMI.
Features
Bootable and compatible with all OS
Better reliability and MTBF than HDD
Small dimension for Blade or 1U servers
Compatible with Intel® RSTe
Cost effective storage solution
SATA Pin 8 VCC to enhance reliability and save space
Customizable for IPMI
Unexpected power loss protection
|
|
|
ServerDOM-V 3SE
Innodisk ServerDOM is dedicated to the further of server design. By using ServerDOM as a boot drive, there is more space for the hot-swappable data storage devices. Innodisk ServerDOM is designed with SATA III interface and complaint with server grade stranded, such as supporting for Intel RSTe. Furthermore, with our excellent development team, we are able to provide customized services to fulfill different inquires; H/W design or software integration, such as IPMI.
Bootable and compatible with all OS
Better reliability and MTBF than HDD
Small dimension for Blade or 1U servers
Compatible with Intel RSTe
Cost effective storage solution
|
|
Phasing out product line
InnoLite SATADOM D150QH Horizontal
InnoLite SATADOM D150QH Horizontal Wide Temp
InnoLite SATADOM D150QV Wide Temp
InnoLite SATADOM D150QV P7 VCC, Hook Wide Temp
InnoLite SATADOM D150QV P7 VCC, Hook
InnoLite SATADOM D150QV
InnoLite SATADOM D150QV P7 VCC Wide Temp
InnoLite SATADOM D150QV-L Low Profile Power Pin 7 and Power Cable
Disk on Module DOM SATA D150 Horizontal
Disk on Module DOM SATA D150 Horizontal Wide Temp
Disk on Module DOM SATA D150 Horizontal Built-in Power (pin7)
Disk on Module DOM SATA D150 Horizontal Low Profile
Disk on Module DOM SATA D150 Horizontal Low Profile Wide Temp
Disk on Module DOM SATA D150 Horizontal Low Profile Built-in Power (pin7)
Disk on Module DOM SATA D150 Horizontal Low Profile Built-in Power (pin7) Wide temp
Disk on Module DOM SATA D150 Horizontal Low Profile Quad Channel
Disk on Module DOM SATA D150 Horizontal Low Profile Quad Channel Wide Temp
Disk on Module DOM SATA D150 Horizontal Low Profile Quad Channel Built-in Power
Disk on Module DOM SATA D150 Horizontal Low Profile Quad Channel Built-in Power Wide Temp
Disk on Module DOM SATA D150 Horizontal Low Profile Spacer Hole
Disk on Module DOM SATA D150 Horizontal Low Profile Spacer Hole Wide Temp
Disk on Module DOM SATA D150 Horizontal Low Profile Spacer Hole Built-in Power
Disk on Module DOM SATA D150 Horizontal Low Profile Spacer Hole Built-in Power Wide Temp
Disk on Module DOM SATA D150 Vertical
Disk on Module DOM SATA D150 Vertical Built-in Power (pin7)
Disk on Module DOM SATA D150 Vertical Built-in Power (pin7) Wide Temp
Disk on Module DOM SATA D150 Vertical Low Profile
Disk on Module DOM SATA D150 Vertical Low Profile Wide Temp
Disk on Module DOM SATA D150 Vertical Low Profile Built-in Power (pin7)
Disk on Module DOM SATA D150 Vertical Low Profile Built-in Power (pin7) Wide Temp
Disk on Module DOM SATA D150 Vertical Quad Channel Built-in Power (pin7)
Disk on Module DOM SATA D150 Vertical Quad Channel
Disk on Module DOM SATA D150 Vertical Quad Channel Wide Temp
Disk on Module DOM SATA D150 Vertical Quad Channel
Disk on Module DOM SATA D150 Vertical Quad Channel Wide temp
Disk on Module DOM SATA D150 Vertical Quad Channel Built-in Power (pin7) Wide Temp
Disk on Module DOM SATA D150 Vertical Quad Channel Low Profile Built-in Power (pin7)
Disk on Module DOM SATA D150 Vertical Quad Channel Low Profile Built-in Power (pin7) Wide temp
Disk on Module DOM SATA D150 Vertical Quad Channel with Hook
Disk on Module DOM SATA D150 Vertical Quad Channel with Hook Wide Temp
Disk on Module DOM SATA D150 Vertical Quad Channel with Hook Built-in Power
Disk on Module DOM SATA D150 Vertical Quad Channel with Hook Built-in Power Wide Temp
Disk on Module DOM SATA D150 Vertical Wide Temp
Disk on Module DOM SATA Horizontal Built-in Power (pin7) Wide Temp
SATADOM D150SH with Toshiba(Pin7 Integrated)(Industrial, Standard Grade, 0? ~ +70?)
SATADOM D150SH with Toshiba(Pin7 Integrated)(Industrial, W/T Grade, -40 ~ 85?)
SATADOM D150SH-L with Toshiba (Pin7 Integrated)(With Spacer Hole, Industrial, Standard Grade, 0? ~ +
SATADOM D150SH-L with Toshiba(Pin7 Integrated)(With Spacer Hole, Industrial, W/T Grade, -40 ~ 85?)
SATADOM D150SV with Toshiba (Pin7 Integrated)(Industrial, Standard Grade, 0? ~ +70?)
SATADOM D150SV with Toshiba(Pin7 Integrated)(Industrial, W/T Grade, -40 ~ 85?)
SATADOM D150SV-L with Toshiba (Pin7 Integrated)(Industrial, Standard Grade, 0? ~ +70?)
SATADOM D150SV-L with Toshiba(Pin7 Integrated)(Industrial, W/T Grade, -40 ~ 85?)
|
SATA Slim 3IE iSLC
iSLC [3IE series], designed to outdo the endurance, performance and reliability of MLC-based solutions. Through the use of flash management algorithms, iSLC improves SSD endurance up to 30,000 times, increasing lifespans up to 10 times longer than MLC-based solutions. In addition, iSLC improves the performance of solid state drives, with similar write performance of SLC-based solutions, and with data quality that is on par with SLC technologies. The Innodisk iSLC series is cost efficient, boasting excellent benefits at only half the price of SLC-based solutions.
Innodisk SATA Slim 3IE is SATA III 6Gb/s Flash based disk, which designed with standard SATA interface (7+15 SATA connector), and compatible with JEDEC MO-297 standard. With its smaller dimension, SATA Slim 3IE is an alternative solution of 2.5” SSD for those embedded system that may have mechanical and space concerns. Innodisk SATA Slim 3IE operates under SATA III (6.0Gb/s) interface with excellent performance and reliability making it the ideal solution for a variety of applications, including embedded system, and industrial field.
Features:
iSLC technology
SATA III soultion for industrial field
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Compatible with JEDEC MO-297 standard
|
|
|
SATA Slim 3IE3
Product Features
SATA III soultion for industrial field
Innovative Firmware Algorithm
DRAM-less, 100% data integrity
Excellent random performance
Wide Temperature: -40°C~85°C
Supports TRIM/NCQ/SMART
Built in iData Guard
iSMART disk health monitoring
Compatible with JEDEC MO-297 standard
|
|
|
SATA Slim 3IE4
Product Features
SATA III soultion for industrial field
Exclusive L³ architecture
DRAM-less, 100% data integrity
Excellent random performance
Supports TRIM/NCQ/SMART
Built in iData Guard
Compatible with JEDEC MO-297 standard
Designed with LDPC ECC engine
|
|
|
SATA Slim 3ME
Innodisk SATA Slim 3ME is SATA III 6Gb/s Flash based disk, which designed with standard SATA interface (7+15 SATA connector), and compliant with JEDEC MO-297 standard. With its smaller dimension, SATA Slim 3ME is an alternative solution of 2.5” SSD for those embedded system that may have mechanical and space concerns. Innodisk SATA Slim 3ME operates under SATA III (6.0Gb/s) interface with excellent performance and reliability making it the ideal solution for a variety of applications, including embedded system, and industrial field.
SATA III soultion for industrial field
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Compliant with JEDEC MO-297 standard
|
|
|
SATA Slim 3ME2
Innodisk SATA Slim 3ME2 is SATA III 6Gb/s Flash based disk, which designed with standard SATA interface (7+15 SATA connector), and compliant with JEDEC MO-297 standard. With its smaller dimension, SATA Slim 3ME2 is an alternative solution of 2.5” SSD for those embedded system that may have mechanical and space concerns. Innodisk SATA Slim 3ME2 operates under SATA III (6.0Gb/s) interface with excellent performance and reliability making it the ideal solution for a variety of applications, including embedded system, and industrial field.
Features
SATA III soultion for industrial field
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Support iData Guard
|
|
|
SATA Slim 3ME3
Product Features
SATA III soultion for industrial field
Innovative Firmware Algorithm
DRAM-less, 100% data integrity
Excellent random performance
Wide Temperature: -40?~85 ?
Supports TRIM/NCQ/SMART
Built in iData Guard
iSMART disk health monitoring
Compatible with JEDEC MO-297 standard
|
|
|
SATA Slim 3ME4
Product Features
SATA III soultion for industrial field
Exclusive L³ architecture
DRAM-less, 100% data integrity
Excellent random performance
Supports TRIM/NCQ/SMART
Built in iData Guard
Compatible with JEDEC MO-297 standard
Designed with LDPC ECC engine
|
|
|
SATA Slim 3MG-P
InnoDisk SATA Slim 3MG-P is SATA III 6Gb/s Flash based disk, which designed with standard SATA interface (7+15 SATA connector), and compliant with JEDEC MO-297 standard. With its smaller dimension, SATA Slim 3MG-P is an alternative solution of 2.5” SSD for those embedded system that may have mechanical and space concerns. InnoDisk SATA Slim 3MG-P operates under SATA III (6.0Gb/s) interface with excellent performance and reliability making it the ideal solution for a variety of applications, including embedded system, and industrial field.
SATA III soultion for industrial field
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Compliant with JEDEC MO-297 standard
|
|
|
SATA Slim 3MG2-P
Innodisk SATA Slim 3MG2-P is SATA III 6Gb/s Flash based disk, which designed with standard SATA interface (7+15 SATA connector), and compatible with JEDEC MO-297 standard. With its smaller dimension, SATA Slim 3MG2-P is an alternative solution of 2.5” SSD for those embedded system that may have mechanical and space concerns. Innodisk SATA Slim 3MG2-P operates under SATA III (6.0Gb/s) interface with excellent performance and reliability making it the ideal solution for a variety of applications, including embedded system, and industrial field.
Features
SATA III soultion for industrial field
High IOPS solution
iData Guard protection
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Compatible with JEDEC MO-297 standard
|
|
|
SATA Slim 3MG2-P_AES
Product Features
SATA III soultion for industrial field
Hardware-based AES 256bits key
iData Guard protection
iSMART disk health monitoring
Compliant with TCG OPAL 2.0
Compliant with IEEE 1667
Excellent data transfer speed
Compatible with JEDEC MO-297 standard
|
|
|
Solid State Drives 2.5 Flash Disk EverGreen SATA Slim
The EverGreen Series provides a brand new cost-effective SSD solution with longer lifespan. Customer can pay much less but gain SSDs within longer life and better performance than current SSD solutions SLC flash IC based.
Cost-effective SSD solution
least 30 times lifespan prolonged
Excellent IOPS random write performance
EverGreen SSD won 19th Taiwan Excellence
|
|
|
InnoRobust II SATA Slim 2SR SLC
Innodisk's SATA Slim 2SR is compliant with the JEDEC MO-297 standards and SATA-IO mini SATA standards, which supports SATA II standard (3.0Gb/s). It comes with several data security functions, including SEraser, QEraser, Destroy, and Write Protect. Also, SATA Slim 2MR is compliant with MIL-STD-810 standards and thus it delivers resistance to shock, vibration and other critical scenario in harsh environment. The SATA Slim 2SR is an SLC-based flash device and is available in capacities from 8GB up to 128GB.
The Innodisk's SATA Slim 2SR guarantees maximum protection in harsh environments and continuously stores data safely and securely.
Erases 128GB of data in seven seconds
Resists shock and vibration
Stays within temperature limits
Flushes all buffer data to the flash chip before total power loss
Features:
Compliant with MIL-STD-810-F/G
Data Security
Excellent data transfer speed
Conformal coating (Optional)
|
|
|
SATA Slim 3SE
Product Features
SATA III soultion for industrial field
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Compliant with JEDEC MO-297 standard
|
|
|
SATA Slim 3SE SLC
Innodisk SATA Slim 3SE is SATA III 6Gb/s Flash based disk, which designed with standard SATA interface (7+15 SATA connector), and compatible with JEDEC MO-297 standard. With its smaller dimension, SATA Slim 3SE is an alternative solution of 2.5” SSD for those embedded system that may have mechanical and space concerns. Innodisk SATA Slim 3SE operates under SATA III (6.0Gb/s) interface with excellent performance and reliability making it the ideal solution for a variety of applications, including embedded system, and industrial field.
SATA III soultion for industrial field
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Compliant with JEDEC MO-297 standard
|
|
|
SATA Slim 3SE-P
Product Features
SATA III soultion for industrial field
DRAM buffer
Great I.O.P.S for best system reaction
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Compatible with JEDEC MO-297 standard
|
|
|
SATA Slim 3SE-P SLC
Innodisk SATA Slim 3SE-P is SATA III 6Gb/s Flash based disk, which designed with standard SATA interface (7+15 SATA connector), and compliant with JEDEC MO-297 standard. With its smaller dimension, SATA Slim 3SE-P is an alternative solution of 2.5” SSD for those embedded system that may have mechanical and space concerns. Innodisk SATA Slim 3SE-P operates under SATA III (6.0Gb/s) interface with excellent performance and reliability making it the ideal solution for a variety of applications, including embedded system, and industrial field.
Features:
SATA III soultion for industrial field
DRAM buffer
Great I.O.P.S for best system reaction
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Compatible with JEDEC MO-297 standard
|
|
|
SATA Slim 3SE3
Product Features
SATA III soultion for industrial field
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Zero mechanical interference
Compliant with JEDEC MO-297 standard
|
|
|
SATA Slim J200 SLC
Within the popular form factor called as MO-297 which is defined by JEDEC,
innoDisk SATA Slim series offers SATA Slim J200 and D150Q two models. SATA Slim
series delivers tiny-sized form factor, especially appropriate for applications,
such as nano ITX, Mini ITX, as well as digital signage.
The SATA Slim J200 not only upgrades the performance, sequential read and
write speed is up to 230MB/sec. and 180MB/sec. respectively, also the capacity
is doubled impressively, up to 32GB within SLC flash IC.
Targeted at embedded/industrial systems such as tablet PC and digital signage,
SATA Slim J200 offers much smaller form factor which features light-weight and
enhances mobility, compared with 2.5" SSD. Additionally, SATA Slim J200 benefits
for anti-shock and anti-vibration since the positioning holes.
|
|
|
FULL PRODUCT LISTING
REQUEST A QUOTE
TECHNICAL SUPPORT
