A PHP Error was encountered
Severity: Warning
Message: A non-numeric value encountered
Filename: ssd/inc_newheader.php
Line Number: 33
background='https://www.memorydepot.com/ssd/images/bigim.jpg' >
 |
|
|
FDISK
|
 2.5" PATA SSD 1MG3-P
Product Features
2.5” PATA solution for industrial field
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Enhanced power cycling management
|
|
|
Solid State Drives 2.5 inch Flash Disk IDE 44pin 1ME
- 2.5 PATA solution for industrial field
- iSMART disk health monitoring
- Intelligent error recovery system
- Excellent data transfer speed
- Enhanced power cycling management
Innodisk 2.5 PATA SSD 1ME complies with ATA 7 standard, and supports Ultra DMA (0-5) and PIO (0-4) transfer modes, which delivers good performance and reliability making it the ideal solution for a variety of applications, including embedded system, industrial computing, and enterprise field. 2.5 PATA SSD 1ME not only performs unmatched performance, but also designed with Innodisk owned technical knowhow to ensure the data integrity and highest levels of reliability.
|
|
|
Solid State Drives Hi-Speed 2.5 Flash Disk IDE 44pin ATA4000CF MLC Innolite
The Innolite ATA4000CF IDE 44 Pin 2.5 Inch Solid State Disk is the next generation of storage device based on industrial flash memory technology, which emulates an ordinary magnetic hard disk.
Built for speed, these Solid State Storage Devices need no moving or spinning parts, and that makes no mechanical noise, suitable for used in portable or embedded system, which has only limited power consumption. The Flash Disk Drive products are also free from extra and special algorithm or some firmware driver. Just plug the unit into the IDE 44pin slots and operate it as same as a regular Hard Disk Drives.
These high-speed SSD units provide faster and higher performance storage solution for industrial application, embedded computing, high-speed networking, broadband communications, mobile computing, military, medical and aerospace
In Addition of high-performance, the devices are capable of withstanding a higher dree of enivornmental distress, delivering extreme endurance.
|
|
|
2.5" PATA Industrial SSD 1SE SLC
Innodisk 2.5" PATA SSD 1SE complies with ATA 7 standard, and supports Ultra DMA (0-5) and PIO (0-4) transfer modes, which delivers good performance and reliability making it the ideal solution for a variety of applications, including embedded system, industrial computing, and enterprise field. 2.5" PATA SSD 1SE not only performs unmatched performance, but also designed with Innodisk owned technical knowhow to ensure the data integrity and highest levels of reliability.
Features:
2.5" PATA soultion for industrial field
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Enhanced power cycling management
|
|
|
2.5" PATA SSD Industrial SSD 1SR-P SLC
Innodisk 2.5" PATA SSD 1SR-P complies with ATA 7 standard, and supports Ultra DMA (0-5) and PIO (0-4) transfer modes, which delivers good performance and reliability making it the ideal solution for a variety of applications, including embedded system, industrial computing, and mission critical applications. Especially, it comes with several data security functions, including QEraser/ SEraser/ Destroy and also Write Protect. All the security functions can be triggered both by hardware and software approaches. 2.5" PATA SSD 1SR-P is compliant with MIL-STD-810F/G standards. 2.5" PATA SSD 1SR-P not only performs unmatched performance, but also designed with Innodisk owned technical knowhow to ensure the data integrity and highest levels of reliability.
Features:
Compliant with MIL-STD-810-F/G
Data security (QEraser/ SEraser/ Destroy/ Write Protect)
High random R/W performance
iSMART disk health monitoring
Intelligent error recovery system
Enhanced power cycling management
iCell technology for data protection
Conformal coating (optional)
|
|
|
2.5" PATA SSD 1SE
Product Features
2.5” PATA soultion for industrial field
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Enhanced power cycling management
|
|
|
Solid State Drives Hi-Speed 2.5 Flash Disk IDE 44pin ATA6000
The ATA6000 Solid State Disk is the next generation of storage device based on industrial flash memory technology, which emulates an ordinary magnetic hard disk.
Built for speed, these Solid State Storage Devices need no moving or spinning parts, and that makes no mechanical noise, suitable for used in portable or embedded system, which has only limited power consumption. The Flash Disk Drive products are also free from extra and special algorithm or some firmware driver. Just plug the unit into the IDE 44pin slots and operate it as same as a regular Hard Disk Drives.
These high-speed SSD units provide faster and higher performance storage solution for industrial application, embedded computing, high-speed networking, broadband communications, mobile computing, military, medical and aerospace
In Addition of high-performance, the devices are capable of withstanding a higher dree of enivornmental distress, delivering extreme endurance.
|
|
|
Solid State Drives Hi-Speed 2.5 Flash Disk IDE 44pin ATA9000
The ATA9000 Solid State Disk is the next generation of storage device based on industrial flash memory technology, which emulates an ordinary magnetic hard disk.
Built for speed, these Solid State Storage Devices need no moving or spinning parts, and that makes no mechanical noise, suitable for used in portable or embedded system, which has only limited power consumption. The Flash Disk Drive products are also free from extra and special algorithm or some firmware driver. Just plug the unit into the IDE 44pin slots and operate it as same as a regular Hard Disk Drives.
These high-speed SSD units provide faster and higher performance storage solution for industrial application, embedded computing, high-speed networking, broadband communications, mobile computing, military, medical and aerospace
In Addition of high-performance, the devices are capable of withstanding a higher dree of enivornmental distress, delivering extreme endurance.
|
|
|
Solid State Drives Hi-Speed 2.5 Flash Disk IDE 44pin INNOROBUST
Compliant with MIL-STD-810-F/G
Data security
iCell technology for data protection
Excellent data transfer speed
TRIM command set supported
Thermal sensor supported
Conformal coating (optional)
InnoRobust SSD provide high capacity 2.5-inch solid-state flash disk that
electrically complies withATA 7 standard, and supports Ultra DMA (0-5) and PIO
(0-4) transfer modes. Particularly InnoDisk hasdedicated to develop own firmware
which enhances small file transfer rate. Regarding performance of InnoRobust SSD,
sustained read is 75 MB per second (max.), and sustained write is 50 MB per
second (max), in terms of 4 KB IOPS, random read is up to 2250, random write is
up to 85.
InnoRobust SSD is designed for industrial field. The SSD have good performance,
no latency time and small seek time. It effectively reduces the booting time of
operation system and the power consumption is less than hard disk drive (HDD).
InnoRobust SSD can work in harsh environment. It is vibration resistance, and
can work in lower or higher temperature than HDD. InnoRobust SSD complies with
ATA protocol, no additional drives are required, and the SSD can be configured
as a boot device or data storage device.
|
|
|
2.5" SATA SSD 3IE2-P
Product Features
2.5” SATA III solution for industrial field
7mm height mechanical design
iSMART disk health monitoring
High IOPS to enhance boot up timing
iData Guard Protection
|
|
|
2.5" SATA SSD 3IE3
|
|
|
|
2.5" SATA SSD 3IE4
|
|
|
Industrial 2.5 SATA SSD 3IE iSLC
iSLC [3IE series], designed to outdo the endurance, performance and reliability of MLC-based solutions. Through the use of flash management algorithms, iSLC improves SSD endurance up to 30,000 times, increasing lifespans up to 10 times longer than MLC-based solutions. In addition, iSLC improves the performance of solid state drives, with similar write performance of SLC-based solutions, and with data quality that is on par with SLC technologies. The Innodisk iSLC series is cost efficient, boasting excellent benefits at only half the price of SLC-based solutions.
Innodisk 2.5" SATA SSD 3IE is SATA III 6Gb/s Flash based disk with iSLC technology, which delivers excellent performance and reliability making it the ideal solution for a variety of applications, including embedded system, industrial computing, and enterprise field. 2.5" SATA SSD 3IE not only performs unmatched performance, but also designed with Innodisk owned technical knowhow to ensure the data integrity and highest levels of reliability.
Features:
iSLC technology
2.5" SATA III solution for industrial field
7mm height mechanical design
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Enhanced power cycling management
|
|
|
Industrial nanoSSD 3IE DEMO KIT iSLC 3
Innodisk nanoSSD is an integrated SATA storage device; it offers high performance, light weight, low power consumption and cost efficiency in a JEDEC MO-276(?SSD) standard form factor. The nanoSSD combines with SATA III Flash controller, making it a great solution for embedded, thin PC, automotive, medical, gaming and most industrial applications.
Compliant with JEDEC MO-276 Specification
SATA III 6Gbps
Support NCQ
Intelligent Flash management & real time garbage collection
Supports S.M.A.R.T, and iSMART utility
Zero mechanical interference
|
|
|
iSLC Solid State Drives 2.5 Flash Disk SATA 2IE
The 2.5 SATA SSD 2IE is designed to deliver superior performance, increased durability, and greater reliability than MLC-based SSDs. With our proprietary iSLC technology, the 2.5 SATA SSD 2IE can last for up to 30,000 operations, with a lifespan 10 times longer than that of an MLC-based SSD. The 2.5 SATA SSD 2IE also delivers write performance similar to that of an SLC-based SSD, and its data quality is on par with SLC technologies.
iSLC technology
iSMART disk health monitoring tool
Intelligent error recovery system
Excellent data transfer speed
Enhanced power cycling management
|
|
|
1.8 inch Industrial SATA SSD 2ME
InnoLite series stands out from consumer grade SSDs due to our reliability and industrial design. Our InnoLite MLC series passed all comprehensive reliability tests to ensure the highest quality for our customers. Not only are our innoLite Series products customized to fit specific needs, they are backed by our dedicated R&D support team and 2 years warranty as well
Available in 8gb to 256GB
InnoLite II 1.8 SATA SSD is standard 7+15 pin SATA interface could support
most of the platform with standard SATA port. InnoLite II 1.8 SATA SSD
operates under SATA II (3.0Gb/s) protocol with good performance, the sustain
read/write can reach up to 190/130MB per second (max).
InnoLite II 1.8 SATA SSD is also suitable in industrial field. It effectively
reduces the booting time of operation system and the power consumption is less
than hard disk drive (HDD). InnoLite II 1.8 SATA SSD complies with ATA
protocol, no additional drivers are required, and the INNOLITE II 1.8 SATA SSD
can be configured as a boot device or data storage device.
|
|
|
1.8" SATA SSD 3MG2-P
Product Features
SATA III solution for industrial field
High IOPS
Intelligent error recovery system
iSMART disk health monitoring
iData Guard for abnormal power failure
|
|
|
1.8" SATA SSD 3MG3-P
Product Features
1.8” SATA III solution for industrial field
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Enhanced power cycling management
|
|
|
1.8" SATA SSD 3MR3
Product Features
1.8” SATA III solution for industrial field
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Enhanced power cycling management
|
|
|
2.5" SATA SSD 3ME2
Product Features
2.5” SATA III soultion for industrial field
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Support iData Guard
|
|
|
2.5" SATA SSD 3ME3
Innodisk 2.5” SATA SSD 3ME3 is SATA III 6Gb/s Flash based disk, which delivers excellent performance and reliability making it the ideal solution for a variety of applications, including embedded system, industrial computing, and enterprise field. 3ME3 2.5” SSD not only performs unmatched performance, but also designed with InnoDisk owned technical knowhow to ensure the data integrity and highest levels of reliability.
Features
2.5” SATA III soultion for industrial field
7mm height mechinicial design
iSMART disk health monitoring
High IOPS to enhance boot up timing
DRAM-less, no data loss concern
iData Guard Protection
|
|
|
2.5" SATA SSD 3ME4
Product Features
2.5” SATA III soultion for industrial field
7mm height mechinicial design
DRAM-less, high-level data integrity
L³ architecture extends lifespan
Excellent IOPS boosts system performance
Built-in thermal sensor
Support S.M.A.R.T, TRIM, NCQ and iData Guard
|
|
|
2.5" SATA SSD 3MG2-P
Innodisk 2.5” SATA SSD 3MG2-P is SATA III 6Gb/s flash based disk, which delivers excellent performance, especially in random data transfer rate, and which offers reliability making it the ideal solution for a variety of applications, including embedded system, industrial computing, and enterprise field. 3MG2-P 2.5” SSD not only performs unmatched performance, but also designed with Innodisk owned technical knowhow to ensure the data integrity and highest levels of reliability. Additionally, 3MG2-P SATA SSD can support device sleep mode (DEVSLP) and thus be able to benefit in extreme low power consumption.
2.5” SATA III solution for industrial field
7mm height mechanical design
High IOPS
Intelligent error recovery system
iSMART disk health monitoring
iData Guard for abnormal power failure
iCell technology for data protection (optional)
DEVSLP supported
|
|
|
2.5" SATA SSD 3MG2-P_AES
Product Features
2.5” SATA III solution for industrial field
Hardware-based AES 256bits key
iData Guard for abnormal power failure
iCell technology for data protection (optional)
Compliant with TCG OPAL 2.0
Compliant with IEEE 1667
7mm height mechanical design
iSMART disk health monitoring
|
|
|
2.5" SATA SSD 3MR3-P
Product Features
Compliant with MIL-STD-810-F/G
Data security (QEraser/ SEraser/ Destroy/ Write Protect)
High random R/W performance
iSMART disk health monitoring
Intelligent error recovery system
iData Guard/iCell technology for data protection
Conformal coating (optional)
|
|
|
Industrial 2.5 SATA SSD 3MG-P
Innodisk 2.5" SATA SSD 3MG-P is SATA III 6Gb/s Flash based disk, which delivers excellent performance and reliability making it the ideal solution for a variety of applications, including embedded system, industrial computing, and enterprise field. 3MG-P 2.5" SSD not only performs unmatched performance, but also designed with InnoDisk owned technical knowhow to ensure the data integrity and highest levels of reliability.
2.5" SATA III soultion for industrial field
7mm height mechinicial design
High random R/W performance
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Enhanced power cycling management
|
|
|
Industrial 1.8 SATA SSD 3ME
Innodisk 2.5" SATA SSD 3ME is SATA III 6Gb/s Flash based disk, which delivers excellent performance and reliability making it the ideal solution for a variety of applications, including embedded system, industrial computing, and enterprise field. 3ME 2.5" SSD not only performs unmatched performance, but also designed with Innodisk owned technical knowhow to ensure the data integrity and highest levels of reliability.
2.5" SATA III soultion for industrial field
7mm height mechinicial design
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Enhanced power cycling management
|
|
|
Industrial 1.8 SATA SSD 3MR-P
Innodisk 1.8" SATA SSD 3MR-P is a SATA III 6Gb/s Flash based disk, which delivers excellent performance and reliability. Especially, it comes with several data security functions, including QEraser/ SEraser/ Destroy and also Write Protect. All the security functions can be triggered both by hardware and software approaches. 1.8" SATA SSD 3MR-P is compliant with MIL-STD-810F/G standards. The SSD is equipped ruggedized hardware design and thus it can perform well in the harsh environment. 1.8" SATA SSD 3MR-P is developed with Innodisk owned technical knowhow to ensure the data integrity and highest levels of reliability.
Features:
Compliant with MIL-STD-810-F/G
Data security (QEraser/ SEraser/ Destroy/ Write Protect)
High random R/W performance
iSMART disk health monitoring
Intelligent error recovery system
Enhanced power cycling management
Conformal coating (optional)
|
|
|
Industrial 2.5 SATA SSD 3ME
Innodisk 2.5" SATA SSD 3ME is SATA III 6Gb/s Flash based disk, which delivers excellent performance and reliability making it the ideal solution for a variety of applications, including embedded system, industrial computing, and enterprise field. 3ME 2.5" SSD not only performs unmatched performance, but also designed with Innodisk owned technical knowhow to ensure the data integrity and highest levels of reliability.
2.5" SATA III soultion for industrial field
7mm height mechinicial design
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Enhanced power cycling management
|
|
|
Industrial 2.5 SATA SSD 3ME2
Innodisk 2.5” SATA SSD 3ME2 is SATA III 6Gb/s Flash based disk, which delivers excellent performance and reliability making it the ideal solution for a variety of applications, including embedded system, industrial computing, and enterprise field. 2.5” SATA SSD 3ME2 not only performs unmatched performance, but also designed with Innodisk owned technical knowhow to ensure the data integrity and highest levels of reliability.
Features
2.5” SATA III soultion for industrial field
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Support iData Guard
|
|
|
Industrial 2.5 SATA SSD 3MG-P iCell
Innodisk 2.5" SATA SSD 3MG-P is SATA III 6Gb/s Flash based disk, which delivers excellent performance and reliability making it the ideal solution for a variety of applications, including embedded system, industrial computing, and enterprise field. 3MG-P 2.5" SSD not only performs unmatched performance, but also designed with Innodisk owned technical knowhow to ensure the data integrity and highest levels of reliability.
Features:
2.5" SATA III soultion for industrial field
7mm height mechinicial design
High random R/W performance
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Enhanced power cycling management
iCell technology for data protection (optional)
|
|
|
Industrial 2.5 SATA SSD 3MG2-P iCell
Innodisk 2.5” SATA SSD 3MG2-P is SATA III 6Gb/s flash based disk, which delivers excellent performance, especially in random data transfer rate, and which offers reliability making it the ideal solution for a variety of applications, including embedded system, industrial computing, and enterprise field. 3MG2-P 2.5” SSD not only performs unmatched performance, but also designed with Innodisk owned technical knowhow to ensure the data integrity and highest levels of reliability. Additionally, 3MG2-P SATA SSD can support device sleep mode (DEVSLP) and thus be able to benefit in extreme low power consumption.
2.5” SATA III solution for industrial field
7mm height mechanical design
High IOPS
Intelligent error recovery system
iSMART disk health monitoring
iData Guard for abnormal power failure
iCell technology for data protection (optional)
DEVSLP supported
|
|
|
|
Industrial 2.5 SATA SSD 3MG2-P with L95
Innodisk 2.5” SATA SSD 3MG2-P is SATA III 6Gb/s flash based disk, which delivers excellent performance, especially in random data transfer rate, and which offers reliability making it the ideal solution for a variety of applications, including embedded system, industrial computing, and enterprise field. 3MG2-P 2.5” SSD not only performs unmatched performance, but also designed with Innodisk owned technical knowhow to ensure the data integrity and highest levels of reliability. Additionally, 3MG2-P SATA SSD can support device sleep mode (DEVSLP) and thus be able to benefit in extreme low power consumption.
2.5” SATA III solution for industrial field
7mm height mechanical design
High IOPS
Intelligent error recovery system
iSMART disk health monitoring
iData Guard for abnormal power failure
iCell technology for data protection (optional)
DEVSLP supported
|
|
|
Industrial 2.5 SATA SSD 3MR-P
Innodisk 2.5" SATA SSD 3MR-P is a SATA III 6Gb/s Flash based disk, which delivers excellent performance and reliability. Especially, it comes with several data security functions, including QEraser/ SEraser/ Destroy and also Write Protect. All the security functions can be triggered both by hardware and software approaches. 1.8" SATA SSD 3MR-P is compliant with MIL-STD-810F/G standards. The SSD is equipped ruggedized hardware design and thus it can perform well in the harsh environment. 2.5" SATA SSD 3MR-P is developed with Innodisk owned technical knowhow to ensure the data integrity and highest levels of reliability.
Features:
Compliant with MIL-STD-810-F/G
Data security (QEraser/ SEraser/ Destroy/ Write Protect)
High random R/W performance
iSMART disk health monitoring
Intelligent error recovery system
Enhanced power cycling management
Conformal coating (optional)
|
|
|
Industrial nanoSSD 3ME
Innodisk nanoSSD is an integrated SATA storage device; it offers high performance, light weight, low power consumption and cost efficiency in a JEDEC MO-276(?SSD) standard form factor. The nanoSSD combines with SATA III Flash controller, making it a great solution for a wide range embedded system, thin PC, automotive device, medical equipment and most
industrial applications.
nanoSSD also comes with industrial level firmware design for extreme environments as well as the possibility for customized firmware to enhance the fitness in different applications.
Compliant with JEDEC MO-276 Specification
SATA III 6Gbps
Support NCQ
Intelligent Flash management & real time garbage collection
Supports S.M.A.R.T, and iSMART utility
Zero mechanical interference
|
|
|
InnoLite II 2.5 SATA SSD
InnoLite series stands out from consumer grade SSDs due to our reliability and
industrial design. Our InnoLite MLC series passed all comprehensive reliability
tests to ensure the highest quality for our customers. Not only are our innoLite
Series products customized to fit specific needs, they are backed by our
dedicated R&D support team and 2 years warranty as well
Available in 8bb to 256GB
InnoLite II 2.5 SATA SSD products provide high capacity flash memory Solid
State Drive (SSD) thatelectrically complies with Serial ATA (SATA) standard. It
supports SATA II standard (3.0GHz) with high performance. For SLC solution,
sustain read is at 240 MB per second (max.), and sustain write is at 220 MB per
second (max); Except sequential read/ write performance, InnoLite II 2.5 SATA
SSD also enhances random data access for small files. Furthermore, InnoLite II
2.5 SATA SSD support TRIM for windows 7, it
can improves performance when deleting files. It designed with standard 2.5-inch
form factor, which can be used in laptop. InnoLite II 2.5 SATA SSD is designed
for industrial field. The SSD have good performance, no latency time and small
seek time. It effectively reduces the booting time of operation system and the
power consumption is less than hard disk drive (HDD). InnoLite II 2.5 SATA SSD
can work in harsh environment. The SSD is vibration resistance, and can work in
lower or higher temperature than HDD. InnoLite II 2.5 SATA SSD complies with
ATA protocol, no additional drives are required, and the SSD can be configured
as a boot device or data storage device.
|
|
|
Slim SSD 3ME
Innodisk Slim SSD 3ME is SATA III 6Gb/s Flash based disk, which designed with standard SATA interface (7+15 SATA connector). With its smaller dimension, Slim SSD 3ME is an alternative solution of 2.5" SSD for those embedded system that may have mechanical and space concerns. Innodisk Slim SSD 3ME operates under SATA III (6.0Gb/s) interface with excellent performance and reliability making it the ideal solution for a variety of applications, including embedded system, and industrial field.
Features:
SATA III solution for industrial field
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Alternatively solution of 2.5" SSD
|
|
|
Slim SSD 3ME3
Product Features
SATA III solution for industrial field
Innovative Firmware Algorithm
DRAM-less, 100% data integrity
Excellent random performance
Supports TRIM/NCQ/SMART
Built in iData Guard
iSMART disk health monitoring
Compatible with JEDEC MO-297 standard
Alternatively solution of 2.5” SSD
|
|
|
Slim SSD 3ME4
Product Features
SATA III solution for industrial field
Exclusive L³ architecture
DRAM-less, 100% data integrity
Excellent random performance
Supports TRIM/NCQ/SMART
Built in iData Guard
Designed with LDPC ECC engine
|
|
|
Solid State Drives 2.5 Flash Disk EverGreen 2.5 SATA SSD
The EverGreen Series provides a brand new cost-effective SSD solution with longer lifespan. Customer can pay much less but gain SSDs within longer life and better performance than current SSD solutions SLC flash IC based.
Cost-effective SSD solution
least 30 times lifespan prolonged
Excellent IOPS random write performance
EverGreen SSD won 19th Taiwan Excellence
InnoDisk Evergreen series provides a totally brand new highly cost-effective
SSD solution with good performance and longer lifespan. Customer can pay much
less but embrace longer life and performance than current SLC flash IC based SSD
solutions. Evergreen Series SSDs is a perfect substitute for traditional HDD,
which are applied with an evolved L2 Wear Leveling Architecture, and
significantly improves SSD random data transfer rate and lifespan.
EverGreen 2.5 SATA SSD provides high capacity flash memory Solid State Drive (SSD)
that electrically complies with Serial ATA (SATA) standard, and supports SATA II
standard (3.0GHz) with high performance. It has good performance; no latency
time and small seek time. It effectively reduces the booting time of operation
system and the power consumption is less than hard disk drive (HDD).
L2 Architecture provides two different versions to enhance sequential
performance (EverGreen) and extended lifespan (EverGreen Plus) respectively.
|
|
|
|
Solid State Drives 2.5 Flash Disk EverGreen Plus 2.5 SATA SSD
The EverGreen Series provides a brand new cost-effective SSD solution with longer lifespan. Customer can pay much less but gain SSDs within longer life and better performance than current SSD solutions SLC flash IC based.
Cost-effective SSD solution
least 30 times lifespan prolonged
Excellent IOPS random write performance
EverGreen SSD won 19th Taiwan Excellence
InnoDisk Evergreen series provides a totally brand new highly cost-effective
SSD solution with good performance and longer lifespan. Customer can pay much
less but embrace longer life and performance than current SLC flash IC based SSD
solutions. Evergreen Series SSDs is a perfect substitute for traditional HDD,
which are applied with an evolved L2 Wear Leveling Architecture, and
significantly improves SSD random data transfer rate and lifespan.
EverGreen Plus 2.5 SATA SSD provides high capacity flash memory Solid State
Drive (SSD) that electrically complies with Serial ATA (SATA) standard, and
supports SATA II standard (3.0GHz) with high performance. It has good
performance; no latency time and small seek time. It effectively reduces the
booting time of operation system and the power consumption is less than hard
disk drive (HDD).
* L2 Architecture provides two different versions to enhance sequential
performance (EverGreen) and extended lifespan (EverGreen Plus) respectively.
|
|
|
Solid State Drives Innorobust II 2.5 Flash Disk SATA SSD MLC
The InnoRobust II 2.5" SATA SSD is a high-capacity flash memory SSD designed for aerospace and defense applications. It comes with several data security functions, including SEraser, QEraser, Destroy, and Write Protect. The InnoRobust II 2.5" SATA SSD Series complies with the SATA II (3.0Gb/s) standard and ATA protocol, and delivers excellent performance, with sustained read and write speeds reaching 220MB/second and up to 120MB/second respectively.
|
|
|
Solid State Drives SATA III Hi-Speed and IOPS 2.5 Flash Disk SATA SSD MLC
The InnoDisk A1 SSD has a SATA III interface allowing for read/write speeds of 520/500MB per second. The A1 is ideal for a variety of applications, including enterprise solutions where data throughput needs to be high, as well as industrial installations where the potential for high shock and vibration conditions exist.
Designed using MLC NAND flash technology, and utilising a unique firmware architecture, the A1 maximises the bandwidth limitations of SATA III giving up to 50,000 input/output operations per second (IOPS).
|
|
|
1.8" SATA SSD Industrial SSD 3SE SLC
Innodisk 1.8" SATA SSD 3SE is SATA III 6Gb/s Flash based disk, which delivers excellent performance and reliability making it the ideal solution for a variety of applications, including embedded system, industrial computing, and enterprise field. 3SE 1.8" SSD not only performs unmatched performance, but also designed with Innodisk owned technical knowhow to ensure the data integrity and highest levels of reliability.
Features:
1.8" SATA III solution for industrial field
iSMART disk health monitoring
Intelligent error recovery syste
Excellent data transfer speed
Enhanced power cycling management
|
|
|
1.8" SATA SSD Industrial SSD 3SR-P SLC
Innodisk 1.8" SATA SSD 3SR-P is a SATA III 6Gb/s Flash based disk, which delivers excellent performance and reliability. Especially, it comes with several data security functions, including QEraser/ SEraser/ Destroy and also Write Protect. All the security functions can be triggered both by hardware and software approaches. 1.8" SATA SSD 3SR-P is compliant with MIL-STD-810F/G standards. The SSD is equipped ruggedized hardware design and thus it can perform well in the harsh environment. 1.8" SATA SSD 3SR-P is developed with Innodisk owned technical knowhow to ensure the data integrity and highest levels of reliability.
Features:
Compliant with MIL-STD-810-F/G
Data security (QEraser/ SEraser/ Destroy/ Write Protect)
High random R/W performance
iSMART disk health monitoring
Intelligent error recovery system
Enhanced power cycling management
Conformal coating (optional)
|
|
|
1.8" SATA SSD 3SE
Product Features
1.8” SATA III solution for industrial field
iSMART disk health monitoring
Intelligent error recovery syste
Excellent data transfer speed
Enhanced power cycling management
|
|
|
1.8" SATA SSD 3SE3-P
Product Features
1.8” SATA III solution for industrial field
iSMART disk health monitoring
Intelligent error recovery syste
Excellent data transfer speed
Enhanced power cycling management
|
|
|
1.8" SATA SSD 3SR-P
Product Features
Compliant with MIL-STD-810-F/G
Data security (QEraser/ SEraser/ Destroy/ Write Protect)
High random R/W performance
iSMART disk health monitoring
Intelligent error recovery system
Enhanced power cycling management
Conformal coating (optional)
|
|
|
2.5 SATA 10000 plus Hi-Speed Solid State Flash Disk
The FiD 2.5" SATA 10000 Plus is a cost-effective, mainstream SLC high-capacity flash memory SSD that electrically complies with SATA standards. Supported by TRIM, the sequential read/write performance will not be affected when files are deleted by the garbage collector, while the random data access for small files is enhanced.
What is the difference between "regular" version and [Version2]?
The [Version2] with part# ending with a "B" is simply a new revision of the model with an updated memory chip and firmware update, they have the exact same functionality and specifications. The [version 2] will be available in a longer time range and the "regular" version will phase out sooner. For a new project, we suggest to go with [Version2]
|
|
|
2.5" SATA SSD Industrial SSD 3SE-P SLC
Innodisk 2.5" SATA SSD 3SE-P is SATA III 6Gb/s Flash based disk, which delivers excellent performance and reliability making it the ideal solution for a variety of applications, including embedded system, industrial computing, and enterprise field. 3SE-P 2.5" SSD not only performs unmatched performance, but also designed with InnoDisk owned technical knowhow to ensure the data integrity and highest levels of reliability.
2.5" SATA III soultion for industrial field
Build-in DRAM buffer
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Enhanced power cycling management
|
|
|
2.5" SATA SSD Industrial SSD 3SR-P SLC
Innodisk 2.5" SATA SSD 3SR-P is a SATA III 6Gb/s Flash based disk, which delivers excellent performance and reliability. Especially, it comes with several data security functions, including QEraser/ SEraser/ Destroy and also Write Protect. All the security functions can be triggered both by hardware and software approaches. 2.5" SATA SSD 3SR-P is compliant with MIL-STD-810F/G standards. The SSD is equipped ruggedized hardware design and thus it can perform well in the harsh environment. 2.5" SATA SSD 3SR-P is developed with Innodisk owned technical knowhow to ensure the data integrity and highest levels of reliability.
Compliant with MIL-STD-810-F/G
Data security (QEraser/ SEraser/ Destroy/ Write Protect)
High random R/W performance
iSMART disk health monitoring
Intelligent error recovery system
Enhanced power cycling management
iCell technology for data protection
Conformal coating (optional)
|
|
|
2.5" SATA SSD 3SE
Product Features
2.5” SATA III solution for industrial field
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Enhanced power cycling management
|
|
|
2.5" SATA SSD 3SE-P
Product Features
2.5” SATA III soultion for industrial field
Built-in DRAM buffer
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
iData Guard
iCell Technoloogy (Optional)
|
|
|
2.5" SATA SSD 3SE3
Product Features
2.5” SATA III solution for industrial field
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Enhanced power cycling management
|
|
|
2.5" SATA SSD 3SR-P
Product Features
Compliant with MIL-STD-810-F/G
Data security (Quick Erase/ Secure Erase/ Destroy/ Write Protect)
High random R/W performance
iSMART disk health monitoring
Intelligent error recovery system
Enhanced power cycling management
iCell technology for data protection
Conformal coating (optional)
|
|
|
2.5" SATA SSD 3SR3-P
Product Features
Compliant with MIL-STD-810-F/G
Data security (QEraser/ SEraser/ Destroy/ Write Protect)
High random R/W performance
iSMART disk health monitoring
Intelligent error recovery system
iData Guard/iCell technology for data protection
Conformal coating (optional)
|
|
|
FiD 1.8" SATA Industrial SSD 25000 SLC
Features:
Stasnard Micro SATA 7+9 pin
High performance and IOPS
|
|
|
|
FiD 2.5" SATA 25000
|
|
|
InnoRobust II Industrial SSD 1.8" SATA SSD SLC
The InnoRobust II 1.8” SATA SSD is a high-capacity flash memory SSD designed for aerospace and defense applications. It comes with several data security functions, including SEraser, QEraser, Destroy, and Write Protect. The InnoRobust II 1.8” SATA SSD Series complies with the SATA II (3.0Gb/s) standard and ATA protocol, and delivers excellent performance, with sustained read and write speeds reaching 170MB/second and up to 140MB/second respectively.
The Innodisk InnoRobust II 1.8” SATA SSD Series guarantees maximum protection in harsh environments and continuously stores data safely and securely.
Erases 128GB of data in seven seconds(SLC type)
Resists shock and vibration
Stays within temperature limits
Flushes all buffer data to the flash chip before total power loss
Features:
Compliant with MIL-STD-810-F/G
Data security
Excellent data transfer speed
TRIM command set supported
Thermal sensor supported
Conformal coating (optional)
|
|
|
Solid State Drives 2.5 Flash Disk SATA III 3SE SLC Embedded
Innodisk 2.5" SATA SSD 3SE is SATA III 6Gb/s Flash based disk, which delivers excellent performance and reliability making it the ideal solution for a variety of applications, including embedded system, industrial computing, and enterprise field. 3SE 2.5" SSD not only performs unmatched performance, but also designed with InnoDisk owned technical knowhow to ensure the data integrity and highest levels of reliability.
2.5" SATA III soultion for industrial field
iSMART disk health monitoring
Intelligent error recovery system
Excellent data transfer speed
Enhanced power cycling management
|
|
|
Solid State Drives Hi-Speed 2.5 Flash Disk SATA 25000 Industrial
The FiD SATA25000 provides High-Performance Storage for industrial application. It not only performs better in sequential data transfer, but also enhances random ata access for small files. FiD SATA25000 delivery a high level of performance and reliability to fulfill veries requirements.
InnoDisk FiD 2.5 SATA 25000 products provide high capacity flash memory
Solid State Drive (SSD) that electrically complies with Serial ATA (SATA)
standard. It supports SATA II standard (3.0GHz) with high performance. For SLC
solution, sustain read is at 250 MB per second (max.), and sustain write is at
200 MB per second (max); Except sequential read/ write performance, InnoDisk FiD
2.5 SATA 25000 also enhances random data access for small files. Furthermore,
InnoDisk FiD 2.5 SATA 25000 support TRIM for windows 7,
it can improves performance when deleting files. It designed with standard
2.5-inch form factor, which can beused in laptop.
InnoDisk FiD 2.5 SATA 25000 is designed for industrial field. The SSD have
good performance, no latency time and small seek time. It effectively reduces
the booting time of operation system and the power consumption is less than hard
disk drive (HDD). InnoDisk FiD 2.5 SATA 25000 can work in harsh environment.
The SSD is vibration resistance, and can work in lower or higher temperature
than HDD.
InnoDisk FiD 2.5 SATA 25000 complies with ATA protocol, no additional drives
are required, and the SSD can be configured as a boot device or data storage
device.
What is the difference between "regular" version and [Version2]?
The [Version2] with part# ending with a "B" is simply a new revision of the model with an updated memory chip and firmware update, they have the exact same functionality and specifications. The [version 2] will be available in a longer time range and the "regular" version will phase out sooner. For a new project, we suggest to go with [Version2]
|
|
|
Solid State Drives Hi-Speed 2.5 Flash Disk SATA 4000
The SATA Solid State Disk is the next generation of storage device based on industrial flash memory technology, which emulates an ordinary magnetic hard disk.
Built for speed, these Solid State Storage Devices need no moving or spinning parts, and that makes no mechanical noise, suitable for used in portable or embedded system, which has only limited power consumption. The Flash Disk Drive products are also free from extra and special algorithm or some firmware driver. Just plug the unit into the SATA slots and operate it as same as a regular Hard Disk Drives.
These high-speed SSD units provide faster and higher performance storage solution for industrial application, embedded computing, high-speed networking, broadband communications, mobile computing, military, medical and aerospace
In Addition of high-performance, the devices are capable of withstanding a higher dree of enivornmental distress, delivering extreme endurance.
|
|
|
Solid State Drives Hi-Speed 2.5 Flash Disk SATA INNOROBUST II
nnoDisk Corporation, a technology leader in flash and DRAM storage products, today announces a new generation of military class rugged SSDs, InnoRobust II SATA SSD, targeting on military/aerospace applications. InnoRobust II SATA SSD is compliant with MIL-STD-810-F/G standards (a United States Military Standard), which assures rugged DSEign for all environments. It also delivers high data security functions for mission critical, military and defense applications or systems. Besides, InnoRobust II SATA SSD can provide option of conformal coating, which is especially suitable for those who concern with the reliability of SSD´s humidity, insulating compound, and also moisture resistance, for example.
Compliant with MIL-STD-810-F/G
Data Security
(QEraser/SEraser/Write Protect)
iCell technology for data protection
Excellent data transfer rate
Conformal coating (Optional)
Regular temp ( -0c to 70c )
InnoRobust series products provide high capacity flash memory Solid State
Drive (SSD) that electrically complies with Serial ATA (SATA) standard.
InnoRobust SATA SSD supports SATA II standard (3.0GHz) with high performance.
Particularly InnoDisk has dedicated to develop own firmware which enhances small
file transfer rate. InnoRobust SATA SSD is designed for industrial field. The
SSD have good performance, no latency time and small seek time. It effectively
reduces the booting time of operation system and the power consumption is less
than hard disk drive (HDD). InnoRobust SATA SSD can work in harsh environment.
The SSD is vibration resistance, and can work in lower or higher temperature
than HDD. InnoRobust SATA SSD complies with ATA protocol, no additional drives
are required, and the SSD can be configured as a boot device or data storage
device.
What is the difference between "regular" version and [Version2]?
The [Version2] with part# ending with a "B" is simply a new revision of the model with an updated memory chip and firmware update, they have the exact same functionality and specifications. The [version 2] will be available in a longer time range and the "regular" version will phase out sooner. For a new project, we suggest to go with [Version2]
|
|
|
FULL PRODUCT LISTING
REQUEST A QUOTE
TECHNICAL SUPPORT
