|
A PHP Error was encountered
Severity: Warning
Message: A non-numeric value encountered
Filename: ssd/inc_newheader.php
Line Number: 33
background='https://www.memorydepot.com/ssd/images/bigim.jpg' >
|
|
|
Disk on Module Hi-Speed DOM EDC8000 IDE 40Pin Vertical
|
|
The Latest Generation Disk on Module with Outstanding Performance and Durability. Extremely light weight, reliable & performant, This latest generation IDE Flash Module is the most flexible solution to provide reliable storage on space limited and hostile environnment.
Decreasing data access time and replacing any moving part from a traditional hard drive, the Flash Disk on Module fit the needs of a wide range of application.
80MB/s Read 75MB/s Write
Fully support of PIO 0-4/Multiword DMA 0-2/Ultra DMA 0-6 modes
IDE Master/Slave select
Power Cable included
Static Wear-Leveling Function
Bad Block Management & Error-Correction Code
DOS/WinCE/Linux/WinXPe bootable
Available in 2GB to 16GB
100% Compatible with the Standard IDE ATA interface, this unit works exaclty like a standard hard drive but without any moving part, strongly increasing reliability and improving data access speed performance, without any noise.
|
|
Commercial Temperature Operating Range: 0c to +70c
|
Why buy this Disk on Module from MemoryDepot.com?
Extremly reliable Flash SLC memory for your industrial application
Worldwide & Direct Access to Support & Engineering
Dedicated Sales Representative
Buy samples onlines and get competitive volume pricing
|
|
Embedded DISK CARD 8000 (EDC8000) products provide high capacity solid-state
flash memory that electrically complies with the Personal Computer Memory Card
International Association ATA standard. InnoDisk Embedded DISK CARD 8000
(EDC8000) is embedded solid-state data storage systems for industrial work
place. Embedded DISK CARD 8000 (EDC8000) supports advanced PIO (0-4), Multi Word
DMA (0-2), Ultra DMA (0-6) transfer modes, multi-sector transfers, and LBA
addressing.
Embedded DISK CARD 8000 (EDC8000) is available in capacities ranging from 2GB to
64GB, making the upgrade path simple and fast. Available in 44-pin horizontal
connector packages, EDC8000 fits into any platform with an IDE connector.
 |
Interface: IDE standard interface, ATA Standard
Capacity:
SLC: 2GB to 32GB; MLC: 4GB to 64GB
Data transfer rate:
Sustain Read: 80Mbytes/s. (MAX)
Sustain Write: SLC- 75Mbytes/s (MAX); MLC-40Mbytes/s (MAX)
Compact Design: Buil-in Power pin (pin 7) - (optional - please contact us)
Access time: 2ms
Error Correction Function: Built-in ECC corrects up to 8-bit per 512-Byte
Dimension: 60.2x27.2x9.1mm (LxWxH)
Weight: 5g
|
 |
No additional device drivers are required. The EDC8000 can be configured as a boot device.
Any Operating system can be installed.
|
 |
EDC8000 can be connected to the host by placing it directly on the on-board
socket. If a cable is used, it should be no longer than 20 inches (457mm), The
40-pin EDC8000 version has a separate connector for the power supply, to which a
power supply cable can be connected. In addition, pin 20 can also be used for
power supply connections. Please contact us for further details.
|
 |
Flash memory can be erased a limited number of times. This number is called the
erase cycle limit or write endurance limit and is defined by the flash array
vendor. The erase cycle limit applies to each individual erase block in the
flash device. EDC8000 uses a wear-leveling algorithm to ensure that consecutive
writes of a specific sector are not written physically to the same page in the
flash. This spreads flash media usage evenly across all pages, thereby
maximizing flash lifetime. |
 |
Operating Temperature Range:
Standard Grade: 0°C to +70°C
Industrial Grade: -40°C to +85°C (SLC only)
Storage Temperature Range: -55°C to +95°C
|
 |
| Reliability |
Test Conditions |
| Vibration |
40pin: 7 Hz to 2000 Hz, 15G, 3 axes
44pin: 7 Hz to 2000 Hz, 20G, 3 axes |
| Mechanical Shock |
1500 G, 3 axes |
| Product |
Condition |
MTBF (Hours): |
| 40-pin |
Telcordia SR-332
GB, 25°C |
> 3,000,000 |
| 40-pin |
> 3,000,000 |
Support Wear-Leveling Algorithm
Support Bad Blocks Management
|
 |
Embedded DISK CARD 8000 (EDC8000) supports the following transfer mode:
PIO Mode: 0~4
Multiword DMA: 0~2
Ultra DMA: 0~2
|
| Capacity |
Cylinders |
Heads |
Sectors |
LBA |
| 2GB |
3900 |
16 |
63 |
3931200 |
| 4GB |
7785 |
16 |
63 |
7847280 |
| 8GB |
15538 |
16 |
63 |
15662304 |
| 16GB |
16383 |
16 |
63 |
31293440 |
| 32GB |
16383 |
16 |
63 |
62,537,728 |
|
Included with all 40pin Disk on Module ( DOM ), we provide a Power Cable connecting to a Standard 4Pin Molex connector. ( Same as traditional 3.5 inch IDE Hard Disk )
|
|
Variation from the same product line:
 |
Looking for pricing?
You can get sample price by clicking on the "details" button on each capacity.
If you need to get a budgetary price for your project, please contact us
|
|
|
Need technical info or advices?
Our mission is to help you finalizing your project successfully. By giving you some advices, we can help you reducing cost and time to market
Here is where you can reach us
|
|
|
| We sell online & Distribute Worldwide |
You can buy any product online. We ship worldwide.
We also provide quantity pricing for distribution. Just contact us to get a quote!
|
Don't hesitate to ask our knowledgeable staff for any product quote or technical advices.
|
|
|
FULL PRODUCT LISTING
REQUEST A QUOTE
TECHNICAL SUPPORT
DE0H-02GD91C1D
