InnoDisk Mini PCIe Disk on Module (mini DOM) series supports SATA II standard (3.0Gb/s) and USB 2.0 interface with good performance and thus performs faster data transfer rate. Sustain read can reach up to 100MB per second (max), and sustain write reach up to 60MB per second (max). Moreover, InnoDisk mini DOM is designed as the standard Mini PCIe form factor, and compatible with Mini PCIe slot.
InnoDisk mini DOM is suitable in industrial field, it effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD). It can work under harsh environment, complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

Interface: Serial ATA II 3.0Gbps, USB 2.0 Capacity: 2GB~16GB Form factor: Standard Mini PCIe Data transfer rate: Read- 100MB/sec., Write- 60MB/sec. Burst Transfer Rate: 300MB/sec. Power Requirement: 3.3V DC single power supply Access time: 0.3ms Error Correction Function: Built-in ECC corrects up to 8-bit per 512-Byte Dimension: 30x50.95x3.4mm

No additional device drivers are required. The InnoDisk mini DOM can be configured as a boot device.

A Serial ATA device may be either directly connected to a host or connected to a host through a cable. For connection via cable, the cable should be no longer than 1meter. The SATA interface has a separate connector for the power supply. Please contact us if you need a model with a Built-in Power from the Sata connection.

Flash memory can be erased within a limited number of times. This number is called the erase cycle limit or write endurance limit and is defined by the flash array vendor. The erase cycle limit applies to each individual erase block in the flash device. InnoDisk mini DOM uses a static wear-leveling algorithm to ensure that consecutive writes of a specific sector are not written physically to the same page and block in the flash. This spreads flash media usage evenly across all pages, thereby extending flash lifetime.

Operating Temperature Range Standard Grade: 0°C to +70°C Industrial Grade: -40°C to +85°C Storage Temperature Range Standard Grade: --55°C to +95°C

Reliability Test Conditions Vibration: 7 to 2000 Hz, 20G, 3 axes Mechanical Shock Duration: Duration: 10ms, 50G, 3 axes Product Condition MTBF (Hours): InnoDisk mini DOM Telcordia SR-332 GB, 25°C > 3,000,000

InnoDisk mini DOM supports the following transfer mode: PIO Mode: 0~4 Multiword DMA: 0~2 Ultra DMA: 0~6 InnoDisk mini DOM power consumption   Parameter mA Sustained Read 206 Sustained Write 186 IDLE 112 Note: Measured with 8GB device

Mini PCIe Disk on Module (PCIe 1.1 compatible)  Mini PCIe Disk on Module (SATA & USB 2.0 compatible)  Mini PCIe Disk on Module (SATA & USB 2.0 compatible)  Mini PCIe Disk on Module (USB 2.0 Compatible)  Mini PCIe Disk on Module (USB 2.0 Compatible) Wide Temp  PCIe Disk on Module  PCIe G1 SSD 910MB/s Matador

Looking for pricing? You can get sample price by clicking on the "details" button on each capacity. If you need to get a budgetary price for your project, please contact us

Need technical info or advices? Our mission is to help you finalizing your project successfully. By giving you some advices, we can help you reducing cost and time to market Here is where you can reach us

Need more info ? Ask us! Name:     Email:       Phone:   Question/Inquiry:   Do you want to be contacted by: Phone     e-mail                                       Enter the verification code above into this field: