Solid State Drives Hi-Speed 2.5 Flash Disk IDE 44pin ATA6000

Flash in Disk (FiD) 2.5 ATA6000 products provide high capacity 2.5-inch solid-state flash disk that electrically complies with ATA6 standard. InnoDisk FiD 2.5 ATA6000 is 2.5-inch solid-state data storage systems under industrial environment. FiD 2.5 ATA6000 supports PIO (0-4), Multiword DMA(0-2) and Ultra DMA(0-5) transfer modes. FiD 2.5 ATA6000 supports LBA addressing mode.

Burst Transfer Rate : 100MB/sec (UDMA5) Sustained Read : 60MB/sec Sustained Write : 40MB/sec Average Latency : 0.4 ms DC Input Voltage: +3.3V/+5V Single power supply Dimension: 100.1/69.8/9.5 mm (W/T/H) Compatibility: CE  and FCC standards

No additional device drivers are required. Flash in Disk (FiD) 2.5 ATA6000 can be configured as a boot device.

Flash memory can be erased a limited number of times. This number is called the erase cycle limit or write endurance limit and is defined by the flash array vendor. The erase cycle limit applies to each individual erase block in the flash device. FiD 2.5 ATA6000 uses a wear-leveling algorithm to ensure that consecutive writes of a specific sector are not written physically to the same page in the flash. This averages flash media usage evenly across all pages, thereby flash lifetime extends.

Operating Temperature Range Standard Grade: -100C ~ +700C Industrial Grade: -400C ~ +850C Storage Temperature Range Standard Grade: -550C to +950C Industrial Grade: -550C to +950C

Reliability Test Conditions Vibration: 7 Hz to 700Hz, 2 g, 3 axes Mechanical Shock Duration: 0.5ms,1 500 g, 3 axes Product Condition MTBF (Hours): FiD 2.5 ATA6000 Telcordia SR-332 GB, 25 0CC > 3,000,000

Solid State Drives Hi-Speed 2.5 Flash Disk IDE 44pin ATA6000 Wide temp

2.5" PATA Industrial SSD SSD 1SE SLC Wide Temp  2.5" PATA SSD Industrial SSD 1SE SLC  2.5" PATA SSD Industrial SSD 1SR-P SLC  2.5" PATA SSD Industrial SSD 1SR-P SLC Wide Temp  2.5" PATA SSD 1MG3-P w/ Toshiba 15nm(Industrial, Standard Grade, 0? ~ +70?)  2.5" PATA SSD 1MG3-P w/ Toshiba 15nm(Industrial, W/T Grade, -40? ~ +85?)  2.5" PATA SSD 1SE (Industrial, W/T Grade, -40 ~ 85?, Thermal Sensor)  2.5" PATA SSD 1SE(Industrial, Standard Grade, 0? ~ +70?)  Solid State Drives 2.5 inch Flash Disk IDE 44pin 1ME  Solid State Drives 2.5 inch Flash Disk IDE 44pin 1ME Wide Temp  Solid State Drives Hi-Speed 2.5 Flash Disk IDE 44pin ATA4000CF Extended Temp MLC Innolite  Solid State Drives Hi-Speed 2.5 Flash Disk IDE 44pin ATA4000CF MLC Innolite  Solid State Drives Hi-Speed 2.5 Flash Disk IDE 44pin ATA6000  Solid State Drives Hi-Speed 2.5 Flash Disk IDE 44pin ATA6000 Wide temp  Solid State Drives Hi-Speed 2.5 Flash Disk IDE 44pin ATA9000  Solid State Drives Hi-Speed 2.5 Flash Disk IDE 44pin ATA9000 Wide temp  Solid State Drives Hi-Speed 2.5 Flash Disk IDE 44pin INNOROBUST  Solid State Drives Hi-Speed 2.5 Flash Disk IDE 44pin INNOROBUST Wide Temp

Looking for pricing? You can get sample price by clicking on the "details" button on each capacity. If you need to get a budgetary price for your project, please contact us

Need technical info or advices? Our mission is to help you finalizing your project successfully. By giving you some advices, we can help you reducing cost and time to market Here is where you can reach us

Need more info ? Ask us! Name:     Email:       Phone:   Question/Inquiry:   Do you want to be contacted by: Phone     e-mail                                       Enter the verification code above into this field: